BenQ Mp720 Dlp Users Manual

Introduction 5
Introduction
Projector features
The projector integrates high-performance optical engine projection and a user-friendly 
design to deliver high reliability and ease of use.
The projector offers the following features:
• Selectable password protected function
• Selectable quick cooling function for reducing projector cooling time
• Optional wireless module allowing more computers to share one projector through 
cable or wireless connection
• Compact and portable unit
• High quality manual...

Introduction 6
Shipping contents
The projector is shipped with the cables required for connection to a PC. Carefully unpack 
and verify that you have all of the items shown below. If any of these items are missing, 
please contact your place of purchase. 
The supplied accessories will be suitable for your region, and may differ from those 
illustrated.
Optional accessories
Projector Soft carry case User’s 
manualUser’s manual 
CD
Quick start 
guideRemote control 
with batteryCleaning cloth Replacement...

Introduction 7
Projector exterior view
Front / upper side
Rear side
Refer to Connection on page 18 for more information on making connections to various 
equipment.1. External control panel 
(See External control panel on 
page 9 for detailed information.)
2. Ventilation grill
3. Projection lens
4. Front adjuster button
5. Lens cap
6. Focus ring and Zoom ring
7. Front IR remote sensor
1
2
3
4
56
7
8. Rear adjuster foot
9. AC power cord inlet
10. Filter case
11. Rear IR remote sensor
12. USB socket
13....

Introduction 8
Side view
Lower side
22. Kensington anti-theft lock slot
23. Front adjuster foot
24. Lamp cover
25. Rear adjuster foot
22
23
24
25
Downloaded From projector-manual.com BenQ Manuals 

Introduction 9
Controls and functions
External control panel
1. Power (Refer to Start up on page 25 and Shutdown on page 30 for more 
information.)
Turns the projector on or off.
2. Blank (Refer to Hiding the image on page 29 for more information.)
Used to hide the screen image. You can press any key on the control panel to bring the 
image back.
3. Mode (Refer to Application Mode on page 33 for more information.)
Depending upon which input signal is selected, there are several picture setup options...

Introduction 108. Power indicator light (Refer to Indicators on page 47 for more information.)
Lights up or flashes when the projector is under operation.
9.3 Left 
10. Right 4(Refer to Correcting keystone on page 28 for more information.)
When the on-screen menu is not activated, #9 and #10 function as Ke ystone -/+ hot 
keys.
11.6Menu (Refer to Using the menus on page 32 for more information.)
Turns on the on-screen display control menu.
12.5Exit
Exits and saves the menu settings.
When the on-screen...

Introduction 11 3.5Up, 6 Down
4.3Left, Right4
When the on-screen menu is activated, the 5Up, 6 Down, 3Left and 
Right4buttons are used as directional arrows to select the desired menu items and to 
make adjustments.
5. Menu (Refer to Using the menus on page 32 for more information.)
Turns on the on-screen display control menu.
Exits and saves the menu settings. (Pressing the 5Up button repeatedly can also exit 
and save the menu settings.)
6. Keystone  (Refer to page Correcting keystone on page 28 for...

Introduction 12
Remote control effective range
Infra-Red (IR) remote control sensors are located on the front and the back of the projector. 
The remote control must be held at an angle within 30 degrees of the projector’s IR remote 
control sensors to function correctly. The distance between the remote control and the 
sensors should not exceed 6 meters (~ 20 feet).
Make sure that there are no obstacles between the remote control and the IR sensors on the 
projector that might obstruct the infra-red...

Positioning your projector 13
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation locations: 
1. Floor in front of screen; 
2. Ceiling in front of screen; 
3. Floor at rear of screen;
4. Ceiling at rear of screen. 
Your room layout or personal preference will dictate which installation location you select. 
Take into consideration the size and position of your screen, the location of a suitable power 
outlet, as well as the...

Positioning your projector 14
I. Floor front
Select this location with the projector placed near the 
floor in front of the screen. This is the most common 
way to position the projector for quick setup and 
portability.
II. Ceiling front
Select this location with the projector suspended 
upside-down from the ceiling in front of the screen.
Purchase the BenQ Projector Ceiling Mounting Kit 
from your dealer to mount your projector on the 
ceiling.
Set   in the Advance > Mirror menu after you turn 
the...