Beretta CX4 Instruction Manual

83
RECEIVER AND STOCK
•Using a synthetic wire brush clean all areas covered by
gunpowder residue and dir t.
•Wipe outer receiver and stock sur faces clean and lightly
lubricate the rails and moving par ts. Lightly oil the disassembly
latch, magazine catch, travel slide stop, trigger system,
hammer and the levers between the hammer and the trigger
system (Fig. 35 - see arrows).
CAUTION: Do not apply excess oil.
MAGAZINE
•Make sure the magazine is thoroughly clean and the follower
slides easily downward if...

84
STORAGE
WARNING:The carbine should be stored UNLOADED, with the
bolt in closed position, the safety engaged and the  hammer
decocked (to decock the hammer pull the trigger).
WARNING:Store firearms and ammunition separately, each in
its own locked container, and away from children and
unauthorized adults!
WARNING:Be cer tain your firearm is unloaded before shipping
or taking it to the dealer.
CAUTION:It is recommended to store the firearm in the supplied
case. Before storage, always check the...

85
NOTES 

170
Fig. 21
Fig. 23
Fig. 25Fig. 22
Fig. 24
Fig. 26
Fig. 28 Fig. 27 

171
Fig. 29
Fig. 31
Fig. 33Fig. 30
Fig. 32
Fig. 34
Fig. 35 

Le illustrazioni e descrizioni di questo opuscolo si intendono fornite a titolo
indicativo. La Casa si riserva pertanto il diritto di apportare ai suoi modelli, in
qualsiasi momento e senza preavviso, quelle modifiche che ritenesse utili per
migliorarli o per qualsiasi esigenza di carattere costruttivo e commerciale.
The illustrations and descriptions given in this brochure are intended as a general
guide only, and must not be taken as binding. The Company, therefore, reserves the
right to make, at any...

Fabbrica dArmi
Pietro Beretta S.p.A.
Via Pietro Beretta, 18
25063 GARDONE V.T.
(Brescia) Italia
Tel. (030) 8341.1
www.beretta.com