Bisell BISSELL CrossWave All in one multisurface cleaning system 1713 User Manual

CROSSWAVE
™
_______________
USER GUIDE
1713 SERIES 

www.BISSELL.com2
IMPORTANT SAFETY INSTRUCTIONS
»  Unplug from electrical socket when not in use 
and before cleaning, maintaining or servicing the 
appliance.
» This appliance can be used by children aged from 8  years and above and persons with reduced physical, 
sensory or mental capabilities or lack of experience 
and knowledge if they have been given supervision 
or instruction concerning use of the appliance in 
a safe way and understand the hazards involved. 
Cleaning and user maintenance shall not...

www.BISSELL.com
What’s In The Box?
NOTE: Standard accessories may vary by model.  To identify what should be included with 
your purchase, please refer to the “Carton Contents” list located on the carton top flap. Handle
Dual Action
Multi-Surface  Brush Roll Brush Roll 
Drying Tray
Storage Tray
Multi Surface
Formula
Thanks for buying a BISSELL CrossWave™
3
We love to clean and we’re excited to share one of our innovative 
products with you. We want to make sure your multi-surface cleaner 
works as well...

www.BISSELL.com
Getting to Know Your CrossWave™
3
2
1
745
68
14
9
10
11
1  Upper Handle
2  SmartClean Fingertip Controls
3    Integrated Carrying Handle
4  Float Stack
5  Dirty Water Tank
6  Solution Spray Indicator LED
7   Foot 8 
Easy Remove Brush Window
9  Easy Clean Storage Tray
10  Solution Spray Trigger
11  In-Use Cord Clip
12  Clean Water Tank
13  Quick Release Cord Wrap
14  Lower Cord Wrap
4
13
12 

www.BISSELL.com
Assembly
Then, on the back of the machine, align 
clean water tank with the grooves and 
slide tank into place until you hear a click.
Insert handle 
into body of 
unit until you 
hear a click.
Wrap the cord around the quick release 
cord wrap and the lower cord wrap.
WARNING
Do not plug in your CrossWave™
 until you are familiar with all instructions   
and operating procedures.
Your BISSELL CrossWave™ machine comes 
in three easy to assemble components and 
does not require any tools to...

Filling Your Clean Water Tank
Lift the clean water tank 
straight up to remove 
from the machine.
The clean water tank 
is located on the 
back of the machine.
Clean Water Tank  
Dirty Water Tank
For small area cleaning (

www.BISSELL.com
Cleaning Your Hard Floors
Recline the body of the machine 
backward to start the brush roll spinning.  
To stop the brush roll spinning, you will 
need to stand the machine upright.
Select   
cleaning   
mode: 
To start cleaning your 
hard floors, turn the 
machine ON in the 
HARD FLOOR setting. 
Once the setting 
is selected, the dry 
vacuum will turn on. 
To turn OFF, press the 
HARD FLOOR setting 
a second time.
Before each use, hold 
the solution spray 
trigger for 10 seconds to...

www.BISSELL.com
Cleaning Area Rugs
Before each use, hold 
the solution spray 
trigger for 10 seconds to 
prime the system with 
cleaning solution. LED 
lights illuminate when 
holding the trigger.
NOTE:  When solution 
is flowing, you will see 
bubbles forming at the 
edges of the brush roll 
window.
To clean, hold the solution 
spray trigger to apply 
solution on both forward and 
backward passes.To dry area rugs faster, 
run the machine over 
your area rug without 
holding the trigger.
NOTE: Before...

Maintenance: Empty Dirty Water Tank
To release dirty water 
tank, press down on 
recessed button on the 
top of the dirty tank.Grasp top of dirty water 
tank in recessed areas on 
each side of the filter and 
pull upward to remove the 
top of the tank.
Pour dirty water and debris out. Rinse the 
inside of the dirty water tank.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from 
electrical outlet before performing maintenance or troubleshooting.
Grab the...

www.BISSELL.com
Maintenance: Empty Dirty Water Tank
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from 
electrical outlet before performing maintenance or troubleshooting.
Angle the dirt tank back into body of 
machine inserting bottom first. Then 
tilt the top of the dirt tank toward the 
machine and push into place until you 
hear a click.
Once parts are dry, reassemble and 
replace the top of dirty water tank.
Place vacuum filter back 
into dirty...