Bisell BISSELL PowerGlide LiftOff Upright Vacuum 48753 User Manual

POWERGLIDELIFT-OFF
®
USER GUIDE
4875 SERIES
*Product images may vary  

2
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS  
BEFORE USING YOUR VACUUM.   
When using an electrical appliance, basic precautions should be 
observed, including the following: 
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC   
SHOCK, OR INJURY:
»   Do not leave appliance when plugged in.
»   Unplug from electrical socket when not in use and 
before servicing.
»   Do not allow to be used as a toy.
»  
This appliance can be used by children 
aged from 8 years and above and 
 
persons with reduced...

3
Thanks for buying a BISSELL vacuum
We’re glad you purchased a BISSELL 
vacuum. Everything we know about 
floor care went into the design and 
construction of this complete,  
high-tech home cleaning system.
Your BISSELL vacuum is well made, 
and we back it with a limited   
five-year guarantee. We also stand 
behind it with a knowledgeable,   
dedicated Consumer Care   
department, so, should you ever   
have a problem, you’ll receive fast, 
considerate assistance.
My great-grandfather invented the...

Product View
WARNING
Do not plug in your vacuum cleaner until 
you are familiar with all instructions and 
operating procedures.
WARNING
Plastic film can be dangerous. To avoid 
danger of suffocation, keep away from 
babies and children.
4
WARNING
To reduce the risk of electric shock, turn 
power switch off and disconnect polarized 
plug from electrical outlet before performing 
maintenance or troubleshooting checks.
1 Handle
2 Lift-Off Pod Release Button
3  Dirt Tank Release Button
4  Carry Handle
5...

5
Assembly
Operations
No tools required for assembly.
Attach handle to vacuum
Locate the vacuum base and the handle. Stand 
the vacuum base upright and slide the handle 
into the opening at the top of the vacuum base. 
The handle will click into place at the highest 
height setting.
NOTE: The handle has two height settings. 
To lower or raise the handle, push the handle 
height adjustment button (designated by the 
corresponding icon pictured below) and slide 
the handle up or down until it locks into...

Operations
6
Handle position
1. Upright - For storage and above floor  
cleaning with special tools.
2. Normal Cleaning - Step on the left side of the 
vacuum powerfoot and pull back on the handle 
to detent the vacuum. The icon pictured to the 
right indicates where to step.
Special tools
Your vacuum is not only a powerful floor vacuum 
cleaner, it’s also a versatile stairs and above floor 
vacuum when you select one of the special tools.
NOTE: The tools can be used with the   
vacuum in the upright...

Cleaning with the removable pod
The Lift-Off ™ vacuum pod easily detaches from 
the vacuum base for cleanups on stairs and in 
other hard-to-reach areas in your home.
Before removing the pod, your vacuum must be 
in its fully upright position. You do not need to 
turn off the power before removing the pod.
1. Press the Lift-Off ™ pod release button at the 
base of the vacuum handle and lift the vacuum 
pod off its base.
2.  Grasp the hose wand grip and lift to separate 
the hose from the hose wand base....

8
Maintenance & Care
To maintain maximum cleaning performance, the 
following maintenance steps must be performed:
1. Empty the dirt container when the dirt reaches 
the “Full” line. 
2.  Check the pre-motor filters at least once a 
month and clean and replace as needed.
3.  Check and replace the post-motor filter   
as needed.
NOTE: More frequent filter cleaning may be 
necessary if you are vacuuming new carpet, 
fine dust or have allergy concerns. 
Follow the instructions on the following pages   
to...

9
Maintenance & Care
Cleaning the pre-motor filters
1. Unplug the vacuum from electrical outlet
2.  The pre-motor filters protect the motor from 
dirt particles and are located underneath the 
dirt tank. To access the filters, first remove the 
dirt tank. Next, lift up on the tab attached to the 
filter cover.
3.  There are two pre-motor filters; one foam 
filter on top and a thinner fiber filter directly 
underneath it. If the filters appear dirty, remove 
both filters. Both pre-motor filters may be...

Maintenance & Care
Rotating brush and drive belt maintenance
Check your vacuum cleaner’s rotating floor 
brush and drive belt regularly for debris, wear  
or damage. Debris can wrap around the brush 
and hamper its ability to effectively clean   
your carpet.
1.  Unplug cleaner from electrical outlet.
2.  Remove detachable pod from vacuum cleaner.
3.  Recline handle and turn vacuum cleaner over 
so bottom side is up.
4.  Remove the eight screws as shown with a 
Phillips head screwdriver. Lift the brush...