Bisell BISSELL ProHeat 2X Revolution Carpet Cleaner 18588 User Manual
Have a look at the manual Bisell BISSELL ProHeat 2X Revolution Carpet Cleaner 18588 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 201 Bissell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PROHEAT 2X ® REVOLUTION ™ Deep Cleaner _______________ USER GUIDE 1858 SERIES
www.BISSELL.com2 READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER. When using an electrical appliance, basic precautions should be observed, including the following: IMPORTANT SAFETY INSTRUCTIONS » Unplug from electrical socket when not in use and before cleaning, maintaining or servicing the appliance. » This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. » Children should be supervised to ensure that they do not play with the appliance. » If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. » Do not run appliance over cord. » Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts of the appliance and its accessories. » Use only the type and amount of liquids specified under the Operations section of this guide. » Do not leave appliance when plugged in. » Always connect to a properly earthed electrical socket. Do not modify earthed plug. » Use indoors only. » Do not allow to be used as a toy. » Use only as described in the user guide. » Use only manufacturer’s recommended attachments. » Do not use with damaged cord or plug. » Do not immerse in water or liquid. » If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water; do not attempt to operate it and have it repaired at an authorized service center. » Liquid or steam must not be directed towards equipment containing electrical components. » Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. » Keep cord away from heated surfaces. » Do not unplug by pulling on cord. » To unplug, grasp the plug, not the cord. » Do not handle plug or appliance with wet hands. » Do not put any object into openings. » Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. » Turn off all controls before unplugging. » Use extra care when cleaning on stairs. » Do not use to pick up flammable or combustible liquids, such as petrol, or use in areas where they may be present. » Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.) » Do not use appliance in an enclosed space filled with vapors given off by oil base paint, some mothproofing substances, flammable dust, or other explosive or toxic vapors. » Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc. » Keep appliance on a level surface. » Do not carry appliance while in use. » Unplug before attaching the TurboBrush™ tool. » Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. » If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. Spares may be obtained from your BISSELL supplier. If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a mains socket. SAVE THESE INSTRUCTIONS FOR OPERATION ON A 220-240 VOLT A.C. 50-60 HZ POWER SUPPLY ONLY. This model is for household use only. WARNING To reduce the risk of fire, electric shock, or injury: WARNING TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, USE INDOORS ONLY . DO NOT IMMERSE. USE ONLY ON SURFACES MOISTENED BY THE CLEANING PROCESS. USE ONLY BISSELL CLEANING PRODUCTS INTENDED FOR USE WITH THIS MACHINE. TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, ALWAYS INSTALL FLOAT BEFORE ANY WET PICK-UP OPERATION.
www.BISSELL.com3 Safety Instructions ...........2 Product View ................ 4 Assembly ................... 5 Cleaning Formulas ...........6 Operations ............... 7-12 Maintenance & Care ...... 12-14Troubleshooting ............15 Guarantee .................. 16 Service ..................... 16 Contact Information ........ 16 Parts & Supplies ............ 16 NOTE: Not all accessories come with every model. Be sure to check the carton for additional tools. What’s In The Box? Thanks for buying a BISSELL deep cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your deep cleaner works as well in six years as it does today, so this guide has tips on using (pages 7-12), maintaining (pages 12-14), and if there is a problem, troubleshooting (page 15). In just a few simple assembly steps, you’ll be ready to deep clean. Flip to page 5 and let’s get started! 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 1. Upper Handle 2. 1 Screw attached to Upper Handle 3. Base with Dirty Water Tank 4. Clean Water Tank 5. Carry Handle 6. BISSELL 2X Professional Formula 7. BISSELL Antibacterial Formula 8. Accessory bag & hose 9. Attachments/accessories (vary by model) 10. Nozzle Clean Out Tool B
Getting to Know Your Deep Cleaner 3 2 1 7 4 5 6 8 15 16 17 18 1413 9 10 11 12 1 Upper Handle 2 Easy Fill/Formula Cap 3 Clean Water Tank (3.7 Litre Capacity) 4 Power Button 5 Float Stack 6 Dirty Water Tank 7 Belt Access Door 8 Foot 9 Spray Trigger 10 In-Use Cord Clip 11 Cleaning Mode Switch 12 Accessory Hose Door 13 Belt/Brush Access Plate 14 EdgeSweep™ Brushes 15 Carry Handle 16 Rubber Tab (on Dirty Water Tank) 17 Quick Release for Wrapped Cord 18 Recline Pedal www. BISSELL.com 4
Assembly In step 3, you will need to use a Phillips screwdriver. 2 34 1 Next, align the carry handle with the slots on either side of the base (behind the power switch and cleaning mode switch). The carry handle will “click” into place. Important: Do NOT put the clean tank on the machine until step 4. First, insert the upper handle at the top of the base until you hear a “click”. Using a Phillips screwdriver, secure the carry handle with the screw that’s taped to the upper handle. Wrap the cord around the carry handle and quick release hook. At the bottom of the upper handle, align the clean water tank with the grooves and slide the tank into place. WARNING Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures. 5 Your deep cleaner comes in four easy-to-assemble components and an accessory bag. • Base • Upper Handle • Clean Water Tank • Carry Handle clickSide View Side Viewwww. BISSELL.com 5
WASH & REMOVE WASH & PROTECT WASH & REMOVE WASH & REFRESH + Antibacterial Professional Stain & Odour Pet Stain & Odour Stain & Odour + OxyFebreze™ Blossom & Breeze Febreze™ Cotton Fresh Natural Orange Cleans and kills odour causing bacteria Professional strength to remove extra tough stains and odours Includes Scotchgard™ Protector Removes tough pet stains and contains patented odour removal technology Includes Scotchgard™ Protector Removes tough stains and odours Includes Scotchgard™ Protector Permanently removes tough stains like red wine, coffee, tea, cola and grape juice with Active Oxygen Technology Powerful cleaning with a refreshing spring scent Powerful cleaning with a refreshing clean scen Powerful cleaning with a refreshing natural orange scent PRETREAT PRE TREAT SPOTS AND STAINS TO IMPROVE CARPET CLEANING PERFORMANCE Stain PreTreat Pet Stain PreTreat Pretreat to penetrate and loosen tough stains Pretreat to help remove tough pet stains and odors Keep plenty of genuine BISSELL formula on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning formulas may harm the machine and will void the gaurantee. Cleaning Formulas WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. ONLY BISSELL Wash & Protect formulas protect from future stains with Scotchgard™ Protector. Scotchgard™ is a trademark of 3M®. *60 mL of 2X concentrated formula is equivalent to 120 mL of non-concentrated formula. Tips Before Carpet Cleaning • If cleaning an entire room, consider moving your furniture to another area. • Use a dry vacuum cleaner over area before using your deep cleaner. • Pre-treat stains with BISSELL PreTreat to improve performance on tough stains and ground-in dirt. www. BISSELL.com6 2X* CONCENTRATED CLEANING FORMULAS
Filling Your Clean Water Tank: formula 1 Lift the clean water tank straight up to remove from the machine. The clean water tank is at the top of the machine. Clean Water Tank (3.7 Litre) Dirty Water Tank Firmly insert the formula bottle into the colour coded cap on the clean water tank. Simply squeeze until formula reaches the EasyFill line. Unscrew the cap from the clean water tank. Add hot tap water to the water fill line. Twist cap back into place. At the bottom of the upper handle, align the clean water tank with the grooves and slide the tank into place. 54 A few notes about filling the clean water tank: • Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. • When using BISSELL Wash & Remove + Antibacterial formula: Only fill your clean water tank with the recommended amount of water and formula to achieve anti-bacterial benefits. 2 3 ATTENTION Do not over wet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure. If you’re not using a formula with a yellow EasyFill cap, please refer to filling instructions on page 8. www. BISSELL.com7
NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. Do not substitute BISSELL 2X Formula cleaning solution with other household cleaning products. Unscrew the cap from the clean water tank. Add hot tap water to the water fill line. Next, reference the chart below for formula amounts to add to the tank. Twist cap back into place. 43 1 Lift the clean water tank straight up to remove from the machine. The clean water tank is at the top of the machine. Clean Water Tank (3.7 Litre) Dirty Water Tank 2 At the bottom of the upper handle, align the clean water tank with the grooves and slide the tank into place. FORMULA FILLING INSTRUCTIONSDEEP CLEAN MODE EXPRESS CLEAN MODE BISSELL 2X Concentrated Formulas Fill water to the Water Fill Line, then add 74 mL of formula. Fill water to the Water Fill Line, then add 37 mL of formula. Filling Your Clean Water Tank: 2X Concentrated Formula www. BISSELL.com8
Cleaning Your Carpet 1 Press the power button to turn the machine on. To recline your machine for use, press the recline pedal with your foot. Plug into a properly earthed outlet. Select cleaning mode: Deep Clean Delivers a deep clean to your carpet. Express Clean Provides a lighter clean with about 1 hour of dry time. *Choose “Deep Clean” mode and use BISSELL Wash & Remove + Antibacterial to deliver antibacterial benefits. 32 4 Deep Clean Mode: 1. Press the spray trigger to apply solution while making 2 slow wet passes - 1 forward and 1 back. 2. Release the trigger. 3. Make 2 slow dry passes - 1 forward and 1 back, to suck up the dirty solution. (Do not hold down the trigger for this step.) NOTE: For best cleaning performance, clean with your machine in Deep Clean Mode. Deep Clean Mode: When using BISSELL Wash & Remove + Antibacterial Formula 1. Press the spray trigger to apply solution while making 3 slow wet passes - 1 forward, 1 back, and 1 forward again. 2. Release the trigger. 3. Make 1 slow dry pass back, to suck up the dirty solution. (Do not hold down the trigger for this step.) Express Clean Mode: 1. Press the spray trigger to apply solution while making 2 wet passes - 1 forward and 1 back. 2. Release the trigger. 3. Make 2 dry passes - 1 forward, 1 back to suck up the dirty solution. (Do not hold down the trigger for this step.) NOTE: In Express Clean Mode, the dirty tank will not get as full as when cleaning with Deep Clean Mode. ATTENTION: To prevent damage to Berber carpets, avoid repeated strokes in the same area. www. BISSELL.com9
*Ensure the machine is upright while using the hose and tool. (The rotating brush rolls under the foot will continue to turn while the hose and tool are in use, but they will lift off the ground.) Cleaning with Hose and Tool Important! Please check manufacturer’s tag before cleaning area rugs for any specialised cleaning instructions. Not for use on silk or delicate area rugs. Cleaning Area Rugs 21 Insert the hose and snap into place. Be sure the coloured hose release clip is facing out, away from machine. Important: Prime the hose by holding at ground level and pressing the spray trigger until solution starts to dispense out of the spray tip. Then, release the spray trigger and proceed to step 3. Press the spray trigger button to spray the soiled area, then slowly move tool back and forth over the area. Release the spray trigger to suck up the dirty solution. Work in small sections until the area is clean. When finished cleaning, suction up warm clean water from a tap or bowl to rinse the inside of the hose and tool. Detach the hose and tool and close the accessory hose door. Let the hose and tool air dry before storing. Turn the machine off and unplug from the earthed outlet. Lift accessory hose door on top of foot on the front of the machine. The door flips toward the machine to open. Attach the tool to the end of the hose. (Tools may vary by model.) Plug into a properly earthed outlet and press the power button to turn machine on. 3 4 Select Express Clean Mode. Test in a small inconspicuous area first for colourfastness.21 www. BISSELL.com10 Important: Keep the foot of the deep cleaner perpendicular to the rug’s edge with each cleaning pass to prevent damage.3 NOTE: If using a Deep Reach Tool (select models only), be sure the needles of the tool are pressed down into the carpet so the spray gets into the carpet fibres. NOTE: Regularly clean high-traffic area rugs in Express Clean mode to remove the forgotten dirt.