Bisell CleanView Compact Pet 4757e User Manual

USER'S GUIDE
4757-E SERIES 220-240V
2Thank You
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingReplacement Parts
3
4
5
5-6
6-9
9-10
10
Warranty
Consumer Care11
12
colours may vary 
from models shown    

www.bissell.com 
Thanks for buying a BISSELL CleanView®  Pet Compact Cylinder
We’re glad you purchased a BISSELL CleanView Pet Compact Cylinder  
vacuum. Everything we know about floor care went into the design and 
construction of this complete, high-tech home cleaning system.
Your BISSELL CleanView Pet Compact Cylinder vacuum is well made, and 
we back it with a limited one year warranty. We also stand behind it with   
a knowledgeable, dedicated Consumer Care department, so, should you 
ever have a...

When using an electrical appliance,  
basic precautions should be observed,   
including the following:
Read all instRuctions 
befoRe using youR V acuuM. 
  WaRning: to  
reduce the risk of fire, 
electric shock, or injury:
■  Use indoors only.
■ For dry pick up only.
■ Do not leave machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, 
has been dropped, damaged, left out-
doors, or dropped into water, return it to 
a service agent.
■ Do not...

www.bissell.com 4
Product view
WaRning:Do not plug in your vacuum until  
you are familiar with all instructions 
and operating procedures.
Combination Crevice 
Tool/Dusting Brush Wide Pet  
TurboBrush™ Tool
colours may vary 
from models shown
Extension Wands
Hose
Handle
Air Flow Regulator
Multi-Surface 
Floor Nozzle
Brush Switch
Hose Connector
Carry Handle
Dirt Cup  
Release Button
Easy Empty™ 
 
Dirt Cup
Emptying 
Button Dirt Cup 
Filter  

www.bissell.com 
Assembly 
1. Connect hose to vacuum by inserting 
hose connector on the end of the hose 
into the suction inlet. make sure the hose 
is positioned so the tabs on the hose 
connector line up with the notches on  
the suction inlet. once inserted into the  
suction inlet, turn counter clockwise to 
lock into place.
2.  Attach extension wands section together 
by inserting into one another and  
twisting slightly to tighten.
3.  Connect hose handle to the end of  
the extention wand and...

www.bissell.com 
Operations
6
special tools
your bissell cleanView Pet compact 
is not only a powerful carpet and rug 
vacuum cleaner, it’s also a versatile bare 
floor and above floor vacuum cleaner 
when you select one of the special tools.
floor nozzle:
  Use to vacuum carpets, rugs and bare 
floors. swivel head turns to get into tight 
spaces and fits under cabinets.
1.  To vacuum carpets and rugs, push the brush 
switch to the carpet position           . This 
will pull the brushes up into the floor...

www.bissell.com 7
Maintenance and care
empty the dirt cup continued
4. Choose an emptying method. method #2 
is recommended for allergy suffers.
  Method #1 – hold the dirt cup over a 
rubbish bin and push the emptying button 
to open the bottom. Close the bottom after 
the dirt empties.
  Method #2 – Place a plastic bag over 
the bottom of the dirt cup. Push the empty-
ing button through the plastic to open the   
bottom. After the dust settles, close the  
bottom and remove the bag to discard.
5....

www.bissell.com 
Maintenance and care
8
 
8. Insert the dirt cup filter assembly back into 
the dirt cup by lining up the tabs on the top 
of the dirt cup filter assembly with the notch-
es inside the top of the dirt cup and turning 
the handle on the bottom of the dirt cup 
filter assembly clockwise to lock into place.  
Replacing the post-motor filter
the post-motor filter assists in the  
filtration process to return cleaner air to 
the room. use only bissell replacement 
filters in your cleanView Pet...

www.bissell.com 9
Maintenance and care
Troubleshooting
4. Tap the dirt cup filter assembly over   
a rubbish bin to remove any dirt or   
debris from the dirt cup filter screen   
that surrounds the dirt cup filter.
5.  Reach up into the dirt cup to clear   
any dirt or debris from the dirt cup.
6.  Check to see if there are any clogs   
in the suction inlet.
7.  After clearing any dirt or debris from the 
dirt cup, replace the dirt cup filter assem-
bly back in the dirt cup following step 8 
of Cleaning...

5. Crack or hole in hose  5. Check hose and replace if needed
6.  Air flow regulator is set to open or minimum setting  6.  Change to closed or maximum setting
7.  Clog in the dirt cup  7. Clear clog from dirt cup following  
       instructions above
Visible dust escaping from vacuum
Possible cause Remedy
1. Dirt cup is full  1.  empty dirt cup 
2.  Filters missing  2. Check all filters for correct installation
3.  Filters are dirty  3. Check and clean or replace all filters
4.  hose is blocked  4....