Bisell CleanView LiftOff Carpet Cleaner 22K7E User Manual

2Thank You
USER'S GUIDE
10N4, 22K7 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingAccessories
Consumer Services3
4-5
6
7-12
13-15 16
17
20
Replacement Parts
Warranty18
19 

www.bissell.com 
Thanks for buying a BISSELL CleanView® Lift-Off®
We’re glad you purchased a BISSELL CleanView® Lift-Off®. 
Everything we know about floor care went into the innovative 
design and construction of this complete, high-tech home cleaning 
system.
Your BISSELL CleanView
® Lift-Off® is well made, and we back it 
with a limited five year warranty. We also stand behind it with a  
knowledgeable, dedicated Consumer Services department, so, 
should you ever have a problem, you’ll receive fast,...

www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
REAd ALL INSTRUCTIONS  
BEFORE USIN g YOUR  
dEEP CLEANER. 
Always connect to a properly Earthed   
outlet. Unplug from outlet when not in use 
and before conducting maintenance or 
troubleshooting.  
   WARNIN g: To  
reduce the risk of fire, 
electric shock, or injury:
 ■  Use indoors only
■ Do not immerse; use only on surfaces 
moistened by cleaning...

Dirty Tank
www.bissell.com 4
Power CordHeat 
 
Indicator Light
Carry Handle
Upper Handle
Portable Spot 
Cleaning Release 
Pedal Quick Release™ 
Cord Wrap  Formula & 
Water Tank
Flex Hose
Removeable 
Nozzle
Edge Sweep™ 
Brushes
Product view
Power Button  

www.bissell.com 
Support Handle
Tool Storage 
(select models)
Hose Secure 
Latch Tool Storage
Cord Clip
Recline Pedal
Product view
5
Cleaning formula
WARNING: To reduce the risk of fire 
and electric shock due  
to internal component   
damage, use only   
BISSELL cleaning formulas 
intended for use with the 
deep cleaner.
Spray Trigger
Note: Additional BISSELL formula options may be available at your local \
retailer.
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and...

www.bissell.com 
Assembly 
6
Your CleanView® Lift-Off® comes in two 
easy to assemble components: 
1.  Upper handle
2.  Portable spot cleaner/Base
The only tool you will need to  
assemble your cleaner is a Phillips 
screwdriver.
1.  Slide upper handle onto base
2.  Screw the four included screws into the 
marked holes. 
Note: two of the holes are located 
underneath the support handle indi-
cated by graphics. Angle screwdriver 
to secure into place. 
3. Wrap power cord around Quick Release 
Cord Wrap....

www.bissell.com 7
Operations
Special features 
Innovative cleaning technology
This innovative deep cleaner offers two 
machines in one. The upright deep cleaner 
uses the power of heat, brushes and clean-
ing formula to get deep down dirt for a 
maximum clean. The portable spot cleaner 
detaches to clean tough spots and stains and 
hard to reach areas. 
Hot water heater
This deep cleaner features a patented 
built-in hot water heater which will heat 
the hand hot tap water you put in to safely 
optimize...

www.bissell.com 
Operations
8
Before you clean
1. Move furniture to another area if cleaning 
an entire room (optional). 
2.  Vacuum area with a dry vacuum cleaner 
thoroughly before deep cleaning.
3.  Pretreating (optional):
3a.  Pretreating is recommended to improve 
cleaning effectiveness for heavily soiled 
carpet in high traffic areas such as 
entryway and hallways. 
3b.  BISSELL Tough Stain precleaner
  Spray the BISSELL Tough Stain  
precleaner formula onto heavy traffic 
areas, soiled areas or...

www.bissell.com 9
Operations
Cleaning continued
3. Release the spray trigger and make one 
slow forward and backward pass over the 
same area. Repeated passes will help aid 
in dry time. 
4.  Continue passes until cleaning area is   
complete. 
Note: Your machine may be equipped 
with a circuit breaker that will auto-
matically shut off the brush if a large 
or loose object is caught in the brush 
roll. If that happens, be sure to unplug 
your machine, remove the foreign 
object, and then plug the...

www.bissell.com 
Operations
10Cleaning your machine continued
2. 
Rinse front nozzle of any dirt and debris. 
  Remove portable spot cleaner from the 
base of the machine. 
  Unscrew three screws with Phillips screw 
driver and remove nozzle. 
  Rinse nozzle out at the faucet. 
  Place back onto the machine by hooking 
the tabs into the holes on the bottom sides 
of the machine. Secure with screws. 
3.  The inside of the end caps can be 
wiped out with a clean paper towel, 
or for a more thorough clean,...