Bisell CleanView PROheat 53U6E User Manual
Have a look at the manual Bisell CleanView PROheat 53U6E User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 201 Bissell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2Thank You USER'S GUIDE 53U6, 34T2 SERIES 220-240V Safety Instructions Product View Assembly Operations Maintenance and Care TroubleshootingReplacement Parts3 4-5 6 7-14 14-15 16-17 18 Accessories and Formulas Warranty Consumer Care18 19 20
Thanks for buying a BISSELL CleanView® ProHeat® deep cleaner We’re glad you purchased a BISSELL CleanView® ProHeat® deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL deep cleaner is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL deep cleaner. Thanks again, from all of us at BISSELL. Mark J. Bissell Chairman & CEO 2
www.bissell.com IMPORTANT SAFETY INSTRUCTIONS 3 When using an electrical appliance, basic precautions should be observed, including the following: REAd ALL INSTRUCTIONS BEFORE USINg YOUR dEEP CLEANER. Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting. WARNINg: To reduce the risk of fire, electric shock, or injury: ■ Use indoors only ■ Do not immerse; use only on surfaces moistened by cleaning process ■ Do not leave machine when it is plugged in ■ Do not service machine when it is plugged in ■ If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard ■ Do not use machine if it has been dropped, damaged, left outdoors or dropped into water ■ Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces ■ Do not carry the appliance while in use ■ Do not unplug by pulling on cord; unplug by grasping plug not the cord ■ Do not handle plug or appliance with wet hands ■ Do not put any object into appliance openings, use with blocked opening or restrict air flow ■ Do not expose hair, loose clothing, fingers or body parts to openings or moving parts ■ Do not pick up hot or burning objects ■ Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapours ■ Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours ■ Do not operate the appliance unless the belt door is securely assembled in the location provided ■ Remove plug from electrical outlet before cleaning or maintaining the appliance ■ Not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person respon- sible for their safety ■ Young children should be supervised to ensure that they do not play with the appliance ■ Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.) ■ Do not modify the Earthed plug ■ Do not use for any purpose other than described in this User’s Guide ■ Use only manufacturer’s recommended attachments ■ Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage ■ Keep openings free of dust, lint, hair, etc. ■ Keep appliance on a level surface ■ Turn off all controls before unplugging ■ Be extra careful when cleaning stairs ■ Pay close attention when working around children SAVE THESE INSTRUCTIONS FOR FUTURE USE This model is for household use only. WARNING: This appliance must be Earthed. IMPORTANT FOR OPERATION ON A 220-240 VOLT A.C. 50/60 Hz POWER SUPPLY ONLY. If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. (Spares may be obtained from your BISSELL supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a 13 amp socket.
www.bissell.com 4 Product view DirtLifter™ PowerBrush Belt Access Door ReadyTools ™ Dial Removable Nozzle Ergonomically Designed Handle Handle Assembly Lower Body Assembly Heater Switch: Turn heat on or off as needed Edge Sweep™ Brushes Integrated Carry Handle Heat Indicator Light/Built-in Hot Water Heater
www.bissell.com Product view 5 Quick Release™ Cord Wrap Power Cord Spray Trigger WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner. Non-BISSELL cleaning formulas may harm the machine and void the warranty. Large, Easy-To- Maneuver Wheels Ready-to-Use Hose Hose Secure Latch Handle Release Power Switch 2-in-1 Water Tank ™ Includes built in formula measuring cup Cord Clip Tough Stain Tool Cleaning formula: Note: Additional BISSELL formula options may be available at your local \ retailer. Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning\ formulas. Non-BISSELL cleaning formulas may harm the machine and will void the warranty. 651 mL Tough Stain Precleaner #0400-E 473 mL 2X Hard Floor Solutions #56L9-E1.5 L 2X Wash & Protect Pet Stain & Odour Formula w/ Scotchgard ™ Protector #66W9-E 1.5 L 2X Wash & Protect Professional Formula w/ Scotchgard ™ Protector #81L5-E 1.5 L 2X Wash & Protect Fresh Fragrance Formula w/ Scotchgard™ Protector #92F4-E 1.5 L 2X Wash & Protect Spring Breeze Fragrance Formula w/ Scotchgard™ Protector #12W4-E 1.5 L 2X Wash & Protect Lavender Fragrance Formula w/ Scotchgard ™ Protector #33D2-E
www.bissell.com Assembly 6 Your CleanView® ProHeat® deep cleaner comes in four easy to assemble components: • Handle assembly • Upper hose rack • Lower body assembly • Lower hose rack Four Phillips head screws are included, 2 long and 2 short. They can be found taped to the handle assembly. The only tool you will need to assemble your cleaner is a Phillips head screwdriver. 1. Slide handle assembly onto lower body and secure with two long screws. 2. Attach upper hose rack to back of handle assembly by pushing into open slots and sliding down until it snaps into place. 3. Attach lower hose rack by sliding in place on lower body assembly and securing with 2 short screws. 4. Attach Tough Stain tool to end of hose. 5. Wrap flex hose around hose rack and secure it into notched out holder as shown. 6. Keep flex hose locked in place with hose secure latch. Hose Secure Latch WARNING: Do not plug in your cleaner until you have completely assembled it per the instructions and are familiar with all instructions and operating procedures. Tip: Deep cleaning carpeting regularly can reduce dust and allergens in your home. 1. 2. 3. 4. 6. 5.
www.bissell.com 7 Operations Special features Your BISSELL CleanView® ProHeat® is a home cleaning system that uses a combination of heat, BISSELL cleaning formula, brush agitation and suction to safely clean carpets. Built-In-Heater BISSELL CleanView® ProHeat® models all fea- ture a patented built-in heater which will heat the hand hot tap water you put in it to safely optimise cleaning effectiveness. The heater will never allow the temperature to exceed 82°C degrees. The heater switch, which is located on the side of the machine, controls the heater so you have the option to turn off the heat if you are cleaning delicate wool or oriental rugs. DirtLifter™ PowerBrush The DirtLifter PowerBrush is designed to enhance cleaning performance. The bristle pattern safely lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension self-adjusts to all carpet heights. When the power is ON and the machine is in the upright position, your carpet is protected because the brushes are lifted up off the carpet. ReadyTools™ Dial The ReadyTools feature allows you to choose between FLOOR CLEANING or cleaning with TOOLS simply by turning the dial. The TOOLS setting allows for above floor cleaning of upholstery, stairs, along baseboards, and other hard to reach areas. Simply choose the tool that is appropriate for the job, attach to flex hose and you are ready to go. Microban® antibacterial protection Microban antibacterial protection helps prevent the growth of harmful common household bacteria including E. coli, Salmonella and Staph. a. It helps to keep the unit fresher and cleaner between uses. ReadyTools™ Dial Heater Switch W ARNING: To reduce the risk of fire, use only BISSELL cleaning formula for full size machines in your deep cleaner. Use of cleaning formulas that contain lemon or pine oil may damage this appliance and void the warranty. Chemical spot cleaners or solvent-based soil removers should not be used. These products may react with the plastic materials used in your deep cleaner causing cracking or pitting.
www.bissell.com Operations 8 Special features continued Scotchgard ™ Protector Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELL offers cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer. Measuring cup Your deep cleaner is equipped with a measuring cup for adding the proper amount of formula to the 2-in-1 water tank. For convenience the measuring cup is built into the lid of the 2-in-1 water tank. 2-in-1 water tank Our 2-in-1 water tank system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water and formula in the bladder will empty. Dirty water pulled out of your carpet will collect around the outside of the bladder so clean and dirty water are always kept separate. This allows the user to maximize tank space, yet only carry one tank to and from the sink for emptying and filling. Removable Nozzle Cleaning up your machine after you're done has never been easier! Nozzle pops off for rinsing in the sink. Before you clean 1. Plan activities to give your carpet time to dry. 2. Move furniture to another area if cleaning an entire room (optional). 3. Vacuum area with a dry vacuum cleaner before deep cleaning. 4. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. Measuring Cup Carry Handle 2 4313 4 567 9101112EXIT ST AR T HERE
www.bissell.com 9 Operations Before you clean continued 5. Pretreating (optional) Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entry ways and hallways. To pretreat: A. Using the BISSELL Tough Stain Precleaner, generously spray evenly over soiled area, do not overwet. B. Wait 3-5 minutes before deep cleaning. C. Clean as normal using your BISSELL deep cleaner. Fill the 2-in-1 water tank 1. Remove the tank from the base of the machine by lifting the tank carry handle. 2. Carry like a bucket to the sink. Rotate the handle forward to unlatch the lid. Remove lid, turn over and locate built in measuring cup. 3. Fill with BISSELL 2X formula to the indi- cated fill line on the built in measuring cup and pour into mouth of the bladder. 4. Fill the bladder with clean hand hot tap water. *Do not boil or microwave water as it can destroy the bladder. 5. Replace the top of the tank by matching the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the car - rying position to latch the lid. Note: Remember to secure the lid and test to make sure it is secure before picking up the tank. 6. Place tank into machine base, seating firmly in place. Rotate tank handle back into latched position. ATTENTION: Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. 1. 3. 5. 2. 4. 6. WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner. Non-BISSELL cleaning formulas may harm the machine and void the warranty.
www.bissell.com Operations 10 Carpet cleaning 1. Plug the deep cleaner into a proper out- let. Set ReadyTools dial to the FLOOR CLEANING setting. Turn the power on by pressing the red power switch on the back of the unit with your foot. Turn heater switch (located on side of unit) to the on position. Allow one minute for the built-in heater to warm up before cleaning. NOTE: The CleanView® ProHeat® will be fully warmed and will provide optimal performance after one minute of continuous heat- ed cleaning. 2. With your foot, press the gray handle release lever located on the back of unit below water tank to detent handle. 3. While pressing the spray trigger, make one slow forward wet pass and another back. Let the built-in heater, BISSELL 2X deep cleaning formula and DirtLifter PowerBrush do the work for you. Caution: Do not overwet. 4. Release the spray trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. 5. Repeat cleaning passes until solution being suctioned up appears clean. Continue passes without pressing the spray trigger until you can’t see any more water being suctioned up. Empty the 2-in-1 water tank/ clean removable nozzle 1. Turn power switch off. Remove the 2-in-1 water tank from the base using the tank carry handle. Carry the tank like a bucket to a utility sink or outside where you will dispose of the collection water. Remove the top of the tank by rotating the handle for - ward to unlatch lid and lifting lid off tank. 2. Empty collection water from bottom of tank. 3. After each use, remove and rinse the lint screen located on the tank lid. 4. If nozzle needs to be cleaned, remove by grasping handle at the top and pulling forward. Clean removable nozzle by rinsing under running water. Tip: Thorough vacuuming before deep cleaning will prevent early clogging of the lint trap. Handle Release Power Switch Heater Switch 1. 3. 2. 4. Lint Screen