Home > Bissell > Cleaner > Bisell FlipEase Dry to Wet 5288 User Manual

Bisell FlipEase Dry to Wet 5288 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Bisell FlipEase Dry to Wet 5288 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 201 Bissell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							5288 SERIES 220-240V
    3Safety Instructions
    Product View
    Assembly
    Operations
    Maintenance and Care
    Troubleshooting
    Consumer Services
    Replacement Parts
    4
    5 
    5-7
    7-8
    9
    10
    11
    Warranty12
    USER’S GUIDE 
    						
    							16www.bissell.com2
    Thanks for buying a BISSELL Flip-Ease™ Cordless Hard Floor Cleaner 
     2www.bissell.com
    We’re glad you purchased a BISSELL Flip-Ease. Everything we know about 
    floor care went into the design and construction of this complete,  
    convenient cleaning system.
    Your BISSELL Flip-Ease is well made, and we back it with a limited one-
    year warranty. We also stand behind it with a knowledgeable, dedicated 
    Consumer Services department, so, should you ever have a problem, you’ll 
    receive fast, considerate assistance.
    My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is  
    a global leader in the design, manufacture, and service of high quality 
    homecare products like your BISSELL Flip-Ease.
    Thanks again, from all of us at BISSELL.
    Mark J. Bissell
    President and Chief Executive Officer  
    						
    							16www.bissell.com 3
    IMPORTANT SAFETY INSTRUCTIONS
    www.bissell.com
    When using an electrical appliance, basic  precautions should be observed, including  the following: 
    REa D  all  In StRU ctIon S b Efo RE  USI nG 
    yo UR  b ISSE ll f lIp-Ea SE co RD lESS 
    HaRD  flooR  clEanER.
      WaRnInG -  
    to reduce the risk of fire, 
    electric shock, or injury:  
    ■	Store indoors.
    ■	Do not expose to rain.
    ■	Do not immerse.
    ■	Do not handle with wet hands.
    ■	Do not use Flip-Ease if it has been dropped,  damaged, left outdoors or dropped into water.    Have it repaired at an Authorized Service Center.
    ■	Do not use with damaged cord or plug on  the charger.
    ■	Do not unplug charger by pulling on cord.
    ■	Do not damage the charger cord. Never carry or pull the charger unit by the cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
    ■	Do not use an extension cord. Charger should plug directly into electrical outlet.
    ■	Do not put any object into appliance openings, use with blocked opening, or restrict air flow. 
    ■	Do not expose hair, loose clothing, fingers or body parts to openings or moving parts.
    ■	Do not pick up hot, burning or smoking objects such as cigarettes, matches or hot ashes.
    ■	Do not pick up flammable or combustible  materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapours.
    ■	Do not use appliance in an enclosed space  filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or  toxic vapours.
    ■	Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.).
    ■	Do not allow to be used as a toy. 
    ■	Not intended for use by young children or infirm persons without supervision.
    ■	Young children should be supervised to ensure that they do not play with the appliance. 
    ■	Do not use for any purpose other than described in this User’s Guide.
    ■	Use only manufacturer’s recommended  attachments - use of attachments not provided or sold by BISSELL may cause fire, electric shock or injury.
    ■	Use only cleaning products formulated or  recommended by BISSELL for this appliance.
    ■	Use only the charger supplied by BISSELL  (packaged with your appliance) to recharge your Flip-Ease.
    ■	Use charger unit only in standard electrical  outlet (220–240V~50/60 Hz.).
    ■	Use charger in dry location only.
    ■	Keep openings free of dust, lint, hair, etc.
    ■		Unplug charger unit from outlet before  maintenance or cleaning.
    ■	Unplug by grasping the plug, not the cord.
    ■	Be extra careful when cleaning stairs.
    ■	Turn off all controls when finished cleaning.
    ■	Do not charge the unit outdoors.
    Your Flip-Ease contains rechargeable nickel cadmium batteries. Do not incinerate batteries as they can explode when exposed to high temperatures.
    Battery cell leaks can occur under extreme conditions. If battery cell liquid comes in contact with the skin:
    ■	Wash immediately with soap and water, then  neutralize with a mild acid such as vinegar or lemon juice.
    ■	If battery cell liquid gets into the eyes:         Flush immediately with clean water for a  minimum of 10 minutes.
    ■	Seek medical attention.
    S a VE  tHESE  
    InStRUctIonS.
    IMpoR tant FOR OPERATION ON A 220-240 VOLT A.C. 50/60 Hz POWER  SUPPLY ONLY. 
    tHIS MoDEl  IS foR HoUSEHolD  USE only.  
    						
    							16www.bissell.com 4www.bissell.com
    Spray Trigger
    Power Switch
    Dirty Tank
    Filter
    Dirty Tank Latch
    Clean Tank
    Charging Port
    MicroFiber™ Pad
    Solution Hose
    Wet Mop PathDry Vacuum Suction Path
    Product View
    Spray Tips (2)
     caUtIon: only use  bISSEll Hard  floor Solutions in your cleaner. Use of cleaning formulas that contain lemon or pine oil may damage this  appliance and void the warranty. Do not use chemical spot cleaners or solvent-based soil removers.  these products may react with the plastic materials used in your cleaner, causing cracking or pitting.
    Charger Plug/Cord 
    						
    							16www.bissell.com 5www.bissell.com
    this user’s guide has been designed to help you  get the most satisfaction from your  flip-Ease  cordless hard floor cleaner.  you’ll find assembly directions, instructions for all cleaning tasks, safety precautions, plus maintenance and troubleshooting instructions.  please read this user's guide thoroughly before using your  flip-Ease.  pay particular attention to the parts diagram, assembly instructions, and part names.  familiarize yourself with the controls and how they’re used.  following this user's guide will greatly enhance your ability to get the best  performance from your  flip-Ease for many years.
    assembling your new  flip-Ease is a 3 step  
    process, requiring no tools.1. Insert foot into body of unit, making sure that the notches are aligned correctly. Push down until you hear a click.
    2. Place the solution tube onto the spray connector. 
    3. Insert the handle into the body of the unit. Turn handle until key in handle falls into  position and you hear a "click".
    Charging the battery
    1. When charging for the first time, allow to charge uninterrupted for at least 12 hours.
    notE: When charging, the  flip-Ease and charger may become warm to the touch.  this is normal and no cause for concern.
    2. Power switch must be in "O" (off) position  to charge.
    3. When completely charged, the average  run time for dry vacuuming is 12 minutes. When completely discharged, it will take approximately 12 hours to fully recharge.
    How to use this guide
    1
    2
    3
    Operations
    Assembly
    Tip:
    For maximum battery life, completely 
    discharge and recharge Flip-Ease 
    every 1-2 months.
    Tip:
    After unit is charged (approximately 
    12 hours) unplug from outlet.  
    This will aid in prolonging the life of 
    the battery. 
    						
    							16www.bissell.com
    Charging the battery (Continued)
    4. To charge your Flip-Ease, connect the round end of the charger cord into the charging port on the side of the unit. Make sure it  is securely connected and the charger  indicator light is illuminated.
    notE: Decreased operating time may  indicate that the battery has built up a charging resistance.  to recharge, first  completely exhaust the battery, recharge it, then exhaust it once again before recharging a second time.  this procedure may be required  more than once. 
    Filling the clean tank
    1. Remove clean tank by grasping it firmly and pulling straight up.
    2. Unscrew the black cap on the bottom of the clean tank and remove the insert. 
    3. Add water and formula* to the indicated fill lines on the clean tank.
    *note:  your  flip-Ease includes two trial size bottles of formula.
    4. Replace the black cap and insert and place clean tank back on unit.
    Dry vac
    1. Attach the MicroFiber pad onto the base of the unit by attaching the pad onto the velcro on one side of the unit, wrapping it under the foot and attaching it to the velcro on the opposite side.
    note: If the Micro fiber pad covers the vacuum suction path, the unit will not suction.
    2.  Turn the power switch "I" (on).
    3. With the dry vac side of the unit facing forward, begin cleaning. You will see dry dirt, crumbs and debris being collected in the dirty tank.
    Operations (Continued)
     6www.bissell.com
    2
    11a
    Tip:
    The MicroFiber pad should be 
    placed on the unit as directed. 
    Covering the vacuum suction path 
    will stop all suction.
    Underside of foot
    MicroFiber Pad
    Suction Path
    Tip:
    The battery is used only when dry vacuuming. For wet mopping, the battery is not used, extending usage time.
    3
    FORMUL AW ATER
    Tip:
    Gently push the tank into place. If  you see air bubbles in the tank, it is  seated properly.
    2
    4Charging Port 
    						
    							16www.bissell.com 7www.bissell.com
    4. Check the filter frequently. If you see hair and fuzzy debris collecting on the filter, remove the dirty tank and dirty tank lid to clean the filter.  
    5. To clean the filter, gently tap it on the edge of the trash can, brushing off anything that may be sticking to the filter. The filter can also be rinsed with warm water. Let air dry before inserting back into the unit.
    Switching from dry vac to wet mop
    1. To change from dry vacuuming to wet  cleaning, simply flip the unit around! 
    Wet Mop
    1. Depress the spray trigger. Water and formula will flow to the two spray tips on the wet mop side. 
    notE: Depressing the spray trigger will turn off the vacuum suction.
    2. Gently mop the floor with the MicroFiber pad. Dirty or sticky areas may require more water and formula.
    3. Allow 3-5 minutes for the floor to air dry.
    Machine care
    1. Turn power switch "O" (off).
    2. After wet mopping is complete, remove the MicroFiber pad from the unit.
    notE:  check the clean tank. If a significant amount of water and formula remains, you may leave it in the clean tank for your next cleaning task
    Operations (Continued)
    4
    Tip:
    You do not have 
    to empty the dirty 
    tank before wet 
    mopping.
    1
    Tip:
    When the spray 
    trigger is squeezed 
    the vacuum suction 
    will stop; extending 
    usage time.
    1a
    Spray Tips
    Maintenance and care 
    						
    							16www.bissell.com
    Maintenance and care (Continued)
    Cleaning the MicroFiber pad
    1. To wash the MicroFiber pad, simply toss in the wash, air dry and reuse. No need to  buy disposable cloths every time you use your Flip-Ease
    Machine storage
    1. Clean exterior surface of Flip-Ease with a soft cloth dampened with water only. Do not use a strong detergent or other cleaners as this may damage the finish.
    2. Store Flip-Ease in a protected dry area, at room temperature (40° - 110°F).
    Battery removal and disposal
    note:  the battery must be removed from the flip-Ease before it is disposed of.
    1. Important: Unplug charger.
    2. Remove tanks (clean and dirty) and discard.
    3. Remove screws (6) holding product housings together (see diagram).
    4. Use a screwdriver to score rating label on side of unit.
    5. Separate housings and locate battery pack in bottom/center of unit.
    note: If the battery is leaking, do not  touch it.  contact your local authorities for a  safe disposal or recycling facility in your area.
    6. Remove wire connectors from the battery pack.
    7. Keep battery packs together – DO NOT  separate individual batteries. For proper battery disposal instructions, please contact your local authorities for requirements and regulations on safe disposal or recycling facilities in your area.
    8. Discard remainder of product.
    3a
     8www.bissell.com
    3b
      WaRn In G:  this product contains a rechargeable nickelcadmium battery (sometimes referred to as a “ni-cad” battery)pack.  the average life ofa ni-cad battery is 5 to 7 years, depending on  frequency of use.   proper removal and disposal of  ni-cad batteries is required. Do not dispose of in the municipal waste.
    Ni-Cad 
    						
    							16www.bissell.com
    Troubleshooting
    problems possible  causes
    1. No suction or unit will not turn on 1. Unit is not charged
    2.  No or low suction 2. Batteries are run down     Filter clogged    Dirty tank not inserted properly      MicroFiber pad covering suction path      Clogged suction path     Foot not properly installed
    3 No Spray 3. Clean tank is empty     Clean tank not inserted properly     Handle not properly inserted     Solution tube not connected to foot
    other maintenance or service not included above should be performed by an  authorized service representative.
    thank you for selecting a  bISSEll product.
    please do not return this product to the store
     WaRn In G:  to reduce the risk of electric shock, turn power switch off and disconnect charger from electrical outlet before performing maintenance or troubleshooting.
    9www.bissell.com 
    						
    							16www.bissell.com
    BISSELL Consumer Services
    10www.bissell.com
    If your bISSEll product should require service: In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local in country distributor for questions, service, or repair. 
    If you have questions about your warranty or need replacement parts please contact the numbers below.
    Or visit the BISSELL website - www.bissell.com
    When contacting BISSELL, have model number of unit available.
    Please record your Model Number: ___________________
    Please record your Purchase Date: ___________________
    note: please keep your original sales receipt. It provides proof of date of purchase in the event of a  warranty claim. See Warranty on page 12 for details. 
    Please do not return this product to the store.
    for UK inquiries:
    Monday - Thursday  9 am — 5 pm   Friday  9 am — 4 pm 
    bISSEll Homecare (overseas) Inc.The Boat Yard  105 Straight Road  Old Windsor  Berkshire, SL4 2SE United Kingdom  Telephone: 0870-225-0109 
    for australian inquiries:
    Monday - Friday     9 am — 5 pm 
    bISSEll aUStRalIa  pty ltDUnit 35 15 Ricketts Road Mount Waverley, Victoria 3149 Australia Telephone: 1-800-811-183 
    for all other inquiries:
    Monday - Friday     8 am — 4 pm 
    bISSEll Homecare, Inc.PO Box 1888Grand Rapids, MI 49501 USATelephone: 01-616-453-4451  Fax: 01-616-453-1383
    for new Zealand inquiries:
    Monday - Friday     9 am — 5 pm 
    parex Industries  ltd.103 Central Park Drive Henderson Auckland New Zealand Telephone: 0800-247-735  
    						
    All Bissell manuals Comments (0)

    Related Manuals for Bisell FlipEase Dry to Wet 5288 User Manual