Home > Bissell > Cleaner > Bisell Pet Hair Eraser Multi Cyclonic Vacuum 10N6 User Manual

Bisell Pet Hair Eraser Multi Cyclonic Vacuum 10N6 User Manual

Here you can view all the pages of manual Bisell Pet Hair Eraser Multi Cyclonic Vacuum 10N6 User Manual. The Bissell manuals for Cleaner are available online for free. You can easily download all the documents as PDF.

Page 1

U S E R ’ S   G U I D E
1 0 N 6   S E R I E S   2 2 0 - 2 4 0 V
3Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
Troubleshooting
Consumer Services
Replacement Parts
4
5-6   
6-10
11-16
16-17
18
19
Additional Accessories
Warranty
19
20
Pet Hair Eraser
™
M u l t i   C y c l o n i c   V a c u u m 

Page 2

2
Thanks for buying a BISSELL Vacuum 
 2w w w . b i s s e l l . c o m 
We’re glad you purchased a BISSELL vacuum. Everything we know about 
floor care went into the design and construction of this complete,  
high-tech home cleaning system.
Your BISSELL vacuum is well made, and we back it with a limited one 
year warranty. We also stand behind it with a knowledgeable, dedicated 
Consumer Services department, so, should you ever have a problem, you’ll 
receive fast, considerate assistance.
My...

Page 3

 3w w w . b i s s e l l . c o m 
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed,  including the following:
READ ALL INSTRUCTIONS 
BEFORE USING YOUR  
CANISTER VACUUM. 
WARNING: To reduce 
the risk of fire, electric shock,  
or injury: 
■ Use indoors only.
■ For dry pick up only.
■ Do not leave machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has been dropped, damaged, left outdoors,...

Page 4

 4w w w . b i s s e l l . c o m 
Handle
Pet Contour Tool™
Power Switch
Easy Empty™
Dirt Container
Headlight
Height Adjustment KnobFoot  Window
Washable  Pre-Motor Filter
Carry Handle
Lock ‘n Seal™ Lever
HEPA Media  Post Motor Filter
Wide Cleaning Foot
Upper Tank
Power  Cord
Crevice Tool
Dusting Brush/Upholstery Tool
Twist ‘n Snap™  Hose
Handle Release Pedal
Hose  Wand
Hose Wand Base
Extension Wand
Hose Clip
Stretch Hose
Quick Release™ Cord Wraps
Quick  Release™ Cord Wraps
Product view
TurboBrush™ Pet
Pet...

Page 5

 5w w w . b i s s e l l . c o m 
The only tool you’ll need to assemble your  vacuum cleaner is a Phillips screwdriver.
Attach handle to vacuum
1.  Locate the handle and cord wrap. Remove the screw packet taped to the handle.
2. Stand the vacuum upright and from the rear of the unit, slide the base of the handle firmly into the grooves at the top of the vacuum body. 
3. Ensure that the handle fits firmly to the vacuum body. If there are any gaps, continue to push firmly until the handle is secure.
4....

Page 6

Attach vacuum hose and tools
1. Attach the Twist ‘n Snap™ Hose by lining up the tabs on the base with the corresponding notches on the back of the vacuum as shown.
2. Turn the Twist ‘n Snap Hose to the right to lock the hose into place.
3. Grasping the Quick Reach Handle, slide the end of the Hose Wand onto the Hose Wand Base. Snap the Hose into the Hose Clip.
NOTE: The vacuum will not operate effectively unless the hose wand is firmly attached.
4. Slide the extension wand and crevice tool into the...

Page 7

Handle positions
Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum into one of three cleaning positions. 
1.  Upright – For storage and above floor cleaning with tools.
2.  Normal Cleaning – Press handle release pedal once. Position used for most  household floor cleaning tasks. 
3.  Low Cleaning – With the vacuum in normal cleaning position, press handle release pedal again. Use for reaching under low furniture such as tables, chairs or...

Page 8

Transporting cleaner
1. To move your cleaner from room to room, put the handle in the upright position, tilt the cleaner back on its rear wheels and push forward.
2. The cleaner can also be moved by using the carry handle.
Special on-board tools
Your vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile above floor  vacuum cleaner when you select one of the  special tools.
1. Raise the handle to the upright position.
2. Grasp the hose wand handle to separate from hose wand base.
3....

Page 9

Special on-board tools (continued)
Crevice Tool: Use in tight narrow spaces.  
Extension Wand: Use with desired attachment for a longer reach.
Hose Wand: Use with desired attachment for a longer reach or for cleaning hard to reach places.
Pet Contour Tool: Use to reach into corners and edges on stairs as well as armrests and other curved surfaces. The tool can be flipped to use in any direction.
TurboBrush Pet: Use rotating brush action for small flat areas such as cushions and beds. 
NOTE: Press gently...

Page 10

Power cord usage 
1. To use your vacuum, remove the cord and plug it into an electrical outlet. For your  convenience, there are two quick release cord wraps for easy cord removal. There is also a cord clip that is part of the upper cord wrap where you can attach the cord when vacuuming.
2. When you are finished cleaning, turn vacuum cleaner off.
3. Unplug power cord by grasping the plug (NOT the cord) and disconnect from outlet.
4. Loop power cord around cord wraps on side of vacuum cleaner. Be sure to...
Start reading Bisell Pet Hair Eraser Multi Cyclonic Vacuum 10N6 User Manual

Related Manuals for Bisell Pet Hair Eraser Multi Cyclonic Vacuum 10N6 User Manual

All Bissell manuals