Home > Bissell > Vacuum Cleaner > Bissell 16n53 Manual

Bissell 16n53 Manual

Here you can view all the pages of manual Bissell 16n53 Manual. The Bissell manuals for Vacuum Cleaner are available online for free. You can easily download all the documents as PDF.

Page 11

Replacing the hEpa filter cartridge
the  hEpa filter cartridge should be 
replaced if machine performance is 
noticeably declining.  More or less   
frequent replacing may be required based 
on individual vacuuming habits and types 
of debris picked up.
Note:  to have the benefits of the 
airetight
®  hEpa System, you must 
use the  bISSEll  hEpa filter cartridge.
1.   Remove the dirt container.
2.   To remove the HEPA filter cartridge, 
push in on the front of the filter door to 
unlatch.  Lift up to...

Page 12

clearing clogs
low suction or poor pickup may be due to 
a clog in the vacuum cleaner. If you notice 
a change in the sound of the motor or a 
reduction in the spinning action in the dirt 
container, check for a clog.
If there is no suction or if suction is reduced 
at the hose, follow these steps to check for 
and clear the clog:
1. Turn power switch off.
2.  Unplug cleaner from electrical outlet.
3.  Check the pre-motor filter and clean as 
necessary (see cleaning your pre-motor 
filter on page 10)....

Page 13

clearing clogs continued
If suction is normal at the hose, follow these steps 
to check for and clear the clog for floor cleaning:
1.  Check diverter area at back of machine for 
diverter position and clogs. When the hose 
wand is inserted in the base, the diverter 
should be to the left. If a clog is visible near the 
diverter, the plastic cover may be removed to 
clear the clog by removing the 3 screws.
2.   Check the foot hose for clogs (1). If you are 
not able to tell from the outside if a clog is...

Page 14

14w w w . b i s s e l l . c o m  8 0 0 . 2 3 7 . 7 6 9 1
Maintenance and care
Brush reset
If something becomes lodged in the foot and the 
brush shuts off, turn the cleaner off and unplug 
from the outlet. Remove the obstruction. the 
brush will automatically reset when the cleaner 
is plugged in and turned back on.
Brush maintenance
t he rotating brush should be checked regularly 
for accumulating debris that might reduce the 
cleaning performance of your vacuum.
1.  Unplug cleaner from electrical...

Page 15

15w w w . b i s s e l l . c o m  8 0 0 . 2 3 7 . 7 6 9 1
Changing the light bulb
1. Turn power switch off.
2.  Unplug cleaner from electrical outlet.
3.  Recline handle for easier access to light bulb 
and remove 2 screws to lift off lens.
4.  Remove the bulb by grasping bulb and pull-
ing straight out of the socket. Install the new 
bulb by pushing gently into the socket until 
the bulb snaps into place.
TurboBrush maintenance
the  turbo brush should be checked regularly for 
clogs or debris wrapping...

Page 16

16w w w . b i s s e l l . c o m  8 0 0 . 2 3 7 . 7 6 9 1
Troubleshooting
Vacuum cleaner won’t turn on
possible causes   Remedies
1.  Power cord not plugged in   1.  Check electrical plug
2.   Blown fuse/tripped breaker   2.  Check/replace fuse or reset breaker
3.   Thermal protector activated   3.  Allow cleaner to cool for 30 minutes, see 
    pg. 13
4.   Handle not fully attached   4.  Remove handle and reinstall
brush not rotating
possible causes    Remedies
1.  Brush switch turned to “Off”   1.  Make...

Page 17

Troubleshooting
17w w w . b i s s e l l . c o m  8 0 0 . 2 3 7 . 7 6 9 1
Vacuum cleaner is difficult to push
possible causes   Remedies
1.  Incorrect height setting   1.  Turn dial to higher setting
Visible dust escaping from cleaner
possible causes   Remedies
1.  Filter door and or gasket missing  1.  Check filter door and gasket 
or not installed properly       
2.   Foam filter missing or not installed properly   2.  Check foam filter for correct installation
3.   HEPA filter cartridge missing or not...

Page 18

18w w w . b i s s e l l . c o m  8 0 0 . 2 3 7 . 7 6 9 1
For information about repairs or replacement parts, or questions about your warranty, call:
bISSEll consumer Services 
1-800-237-7691
 
Monday - Friday    8 a.m. — 10 p.m. EST
Saturday    9 a.m. — 8 p.m. EST
Or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids  MI 49501
ATTN: Consumer Services
 
Or visit the BISSELL website -  www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number:...

Page 19

19w w w . b i s s e l l . c o m  8 0 0 . 2 3 7 . 7 6 9 1
you may purchase parts from your retailer, by calling  bISSE ll c onsumer Services or by   
visiting our website.  below is a list of common replacement parts*. While not all of these 
parts may have come with your specific model, they are available for purchase if desired.  
p lease note, all attachments may not store on board your vacuum.
Item  p art No.  p art Name
 1  48G7   HEPA Filter Cartridge
 2  63M7  Foam Filter
 3  203-1362  TurboBrush...

Page 20

20w w w . b i s s e l l . c o m  8 0 0 . 2 3 7 . 7 6 9 1
Warranty - BISSELL Healthy Home Vacuum™
 This warranty gives you specific legal rights, and you may also have other rights which may vary from state to 
state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, 
please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
limited five year Warranty
Subject to the  *EXcEptIoNS  aND EXclUSIoNS identified...
Start reading Bissell 16n53 Manual

Related Manuals for Bissell 16n53 Manual

All Bissell manuals