Bissell Quicksteamer 1950 W Manual

Safety Instructions
Product view
Assembly
Operations / Special Tools
QuickSteamer
™
USER’S GUIDE
1950 SERIES
3
4
5
6-8
Routine Maintenance9
Troubleshooting10
Warranty 12
Replacement Parts11
Consumer Services 10 

Thanks for buying a BISSELL QuickSteamer™
We’re glad you purchased a BISSELL®QuickSteamer™Lightweight
Deep Cleaner. Everything we know about floor care went into the design
and construction of this complete, high-tech deep cleaning system.
Your QuickSteamer
™is well made, and we back it with a full one-year
warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Service department, so, should you ever have a 
problem, you’ll receive fast, considerate assistance.
My great-grandfather...

IMPORTANT SAFETY INSTRUCTIONS
Use only manufacturer’s recommended
attachments.
Use only cleaning products formulated by 
BISSELL for use in this appliance.
Keep openings free of dust, lint, hair, etc.
Keep appliance on a level surface.
Turn off all controls before unplugging.
Unplug by grasping the plug, not the cord.
Be extra careful when cleaning stairs.
Pay close attention when working 
around children.
SAVE THESE INSTRUCTIONS.
GROUNDING INSTRUCTIONS.
This appliance must be connected to a...

1.
2.
Handle
Assembly Spray
Trigger
Power 
Switch
Dirty
Water
Tank
Floor
Nozzle Vent Cover
Containing
Foam Filter
Spray Bar
Lower
Body Clean
Water
Tank
Lower
Cord
WrapPhillips
Head
Screw
Quick Release 
Cord Wrap
Power Cord
Large,
Easy
Rolling
WheelsDetent
Lever 

How To Put It Together
Other Components
How to use this guide
This User’s Guide has been designed 
to help you get the utmost satisfaction from 
your BISSELL QuickSteamer Lightweight Deep
Cleaner. You’ll find assembly and operating 
instructions, safety precautions, as well as 
maintenance and troubleshooting instructions.
Please read this Guide thoroughly before 
assembling your cleaner.
Pay particular attention to the product 
diagram, assembly instructions, and part names.
Locate and organize all...

Plan activities to give carpet time to dry.
Remove easily moved furniture (chairs, lamps,
coffee/cocktail tables, etc.) from room if needed.
Vacuum carpet thoroughly.
Decide where to begin — and end — your job. Clean
in 3’ X 4’ sections, starting in areas farthest from exit.
Plan to leave a path open to empty soiled water and
refill cleaner.
Carpeting will dry in three to four hours, depending on
carpet style and air circulation in room. A floor fan
speeds drying.
Replace furniture on damp carpeting by...

Pre-Treating (Optional)
Pre-treat stubborn stains and highly soiled carpet in 
hallways and other high-traffic areas.
Spray soiled area with BISSELL
®Tough Stain PreCleaner.™
Use a stiff-bristled brush to work formula into carpet pile.
Wait 3 -5 minutes before deep cleaning.
Turn Power Switch [back of Lower Body] to (    ) ON.
With foot, press the Detent Pedal on right side of Lower Body.
Depress Trigger to spray cleaning solution. Do not overwet.
Repeat motion over same area without depressing Trigger....

Attaching the Bare Floor Tool Continued*
Cleaning Bare Floors
*Available with select models only.
Remove Dirty Water Tank.
Remove Brush by depressing tabs on the Cross Action
™Brush
outward with thumbs until the Brush loosens.
Add Bare Floor Tool underneath the Floor Nozzle by sliding
notches and tabs into the opening until it is secure. Make sure
tabs on the Bare Floor Tool snap over front lip of 
Floor Nozzle.
Replace empty Dirty Water Tank.
Empty and rinse Clean Water Tank.
Using the Formula Measuring...

When you’re done
WARNING: 
Do not store unit where
freezing may occur.
Damage to internal 
components may result.
1.
2.
3.
6.
4.
5.
Turn Power Switch to OFF (     ) position.
Unplug Power Cord from outlet.
Remove and empty Dirty Water Tank.
a. Press detent Pedal and tip Handle back, laying it gently on floor.
b. Release Dirty Water Tank latches [1 each side] by pulling up from 
bottom of latch and then out.
c. Carefully lift Dirty Water Tank from Lower Body.
d. Carry Dirty Water Tank to a toilet or sink....

BISSELL Consumer Services
Troubleshooting
Reduced spray or no spray.
Possible Causes Remedies
Clean Water Tank empty Refill Tank with water and formula
Spray Bar clogged Clean Spray Bar
Deep Cleaner not picking up cleaning solution.
Possible Causes Remedies
Dirty Water Tank not aligned/secured Check Tank for proper alignment
and secure with side latches
Dirty Water Tank is full Empty Tank
WARNING: To reduce the risk of
fire, electric shock or
injury, unplug appli-
ance from outlet before
servicing.
For...