Blomberg Waf 6100 A Users Manual

11
      Program Selection and Starting Machine4
Plug you machine to outlet. Turn on 
the machine by pressing “On / Off” 
key. Open the door by pulling the 
handle and load the machine without 
exceeding loading capacity and close 
the door. Specify the appropriate pro-
gram by looking at program selection 
table according to type of laundry, 
degree of soiledness and washing 
temperature. Position program selec-
tion key to desired washing program-
temperature.  Select convenient spin 
speed related to...

12
Program Type of laundry 
Max Load (kg)Program Du
-
ration (min.)WaterConsumption (lt)Energy Consumption (kWh)Quick washRinse PlusAnti-creasing
Cotton 95 with PrewashHeavy soiled Durable fabrics made of cotton and linen6160602.60 • • 
Cotton 95Heavy soiled Durable fabrics made of cotton and linen6150552.00• • • 
Cotton 60 *Normal soiled cotton and linen durable to heat 6135491.14• • • 
Cotton 40 Less soiled cotton and linen  sensitive to heat 6125490.70• • • 
Intensive 60Heavy soiled Durable fabrics...

13
Pressing “On/Off”
By pressing “On/Off” button you can 
make your machine ready for select-
ing program. When “On/Off” key is 
pressed “door” led will light on mean-
ing “door can open”. Press “On/Off” 
key again for turning your machine 
off. 
Pressing “On/Off” does not mean 
program started operation. You must 
press “Start/Pause/Cancel” for start-
ing the program. 
Child-proof lock
During washing laundry in order to 
maintain that program progress is not 
affected by pressing keys by children...

14
Changing Program 
You can use this feature for wash-
ing laundry in the same textile group 
for washing at lower or higher tem-
peratures. For example, instead of 
Cotton60, Cotton40 can be used. 
For selecting Cotton40 instead of 
Cotton60 by pressing “Start/Pause/
Cancel” key machine is switched 
to pause position. Program knob is 
turned for selecting Cotton40 pro-
gram. 
Even when the program selection 
button is changed during the pro-
gram initially selected program will 
be executed. For...

15
gram can be selected. 
Even program selection button is 
changed during the program initially 
selected program will be executed. 
For changing washing program “Can-
celing a program” must be performed 
afterwards new program can be 
selected and started 
After machine starts operation even if 
spin speed or washing temperature is 
changed, initial speed and tempera-
ture is valid. In order to change spin 
speed or temperature after pressing 
“Start/Pause/Cancel”  new cycle or 
temperature can be...

16
Detergent Dispenser
Powder detergent residue may ac-
cumulate in drawer after a while. In 
order to clean detergent drawer press 
the marked point of the siphon on 
softener compartment and push the 
drawer towards yourself. Wash the 
drawer with water 
Siphon
Do not neglect cleaning suction cup 
when it becomes soiled. In order take 
suction cup out first take detergent
drawer out. Clean it in order to elimi-
nate blocking by softener residue. 
After cleaning place suction cup to 
its place and make...

17
If your system is not ready, let a certi-
fied plumber make it ready.  
1.  Removing the transportation 
safety bolts
Before the washing machine is oper-
ated, the transit bars must be re-
moved! In order to do this:
1. Loosen “C” bolts by rotating them 
counter clockwise with a suitable 
spanner 
2. Remove transportation safety bolts 
by turning. 
3. Place “P” plastic covers onto the 
openings of transportation locks by 
rotating in direction of arrow and 
pushing. 
Attention please! Keep the...

18
water inlet models, 2 for single water 
inlet models) on hose or plastic bag for eliminating any leakage in con-nections points. These seals must be used on each side of the connection. Seals on machine side must be con-nected filter cannal.
After connecting the hose, check all connections for leaks In order to eliminate any risk due to water leak-age keep the taps off when machine is not used.
Your machine will operate efficiently ifthe water from tap is minimum 1 and maximum 10 bars. Practically 1...

19
You turned the machine on, but the 
leds are off on the panel.
Check the grounding on the power 
cable or a blown fuse. Check the front 
door proper closure.
Machine does not take water.
Check the front door for proper clo-
sure. Either taps are closed or water 
intake filters are clogged.
Taken water is directly discharged.
Check if the discharge hose placed 
as described in the users manual or 
not.  
Water coming from beneath the 
machine.
Check the water intake and drain 
hoses. Tighten the...