Bonitor Mp201 Fine Mini Projector User Guide

							 
  
MP201 User Guide    
						

							  
2 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP201  
   
User Guide Menu 
Overview 3 
Specifications  4 
Compatibility 5 
Operating Instructions 6-7 
Trouble Shooting  8 
Safety Statements 9 
  
    
						

							  
3 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP201  
 
Overview 
  
Bonitor  MP201  is  a  portable  mini  projector  powered  by  both  long-life  rechargeable 
li-ion  battery  and  dc  power.  It  works  with  most  of  the  devices  with  video  output 
capability  to  project  videos  anywhere.  Typical  exam ples  are  game  consoles,  dvd  and 
blueray disc player, mobile phone, portable media p layer. 
   
Power ON/OFF 
LED Light 
Tripod Socket 
Speaker 
Lamp Focus 
Ventilation Hole 
USB Jack 
2.5mm Input   
						

							  
4 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP201  
 
Specifications 
 
Description Parameter 
Display Technology  LCOS 
Native Resolution  640 x 480 pixels 
Aspect Ratio  4 : 3 
Brightness  15 lumens 
Throw Ratio  1.57 
Projection Distance  195 - infinite 
Image Size  124.5 - infinite / 4.9” - infinite 
Light Source  LED 
LED Lifetime  >30,000 hours 
Inputs  Composite Video, DC Power 
Input Signal  NTSC, PAL, SECAM 
Refresh Rate  50 Hz / 60 Hz 
Input Resolution  VGA, SVGA, XGA 
Dimension  60 x 113 x 18 mm 
Weight  160 grams 
Tripod Socket  ¼ - 20 
Operating Temperature  10
 - 27
C / 50
 - 80
F 
Speaker  Built-in stereo 0.5W / 4ohm x 2 
Battery  Rechargeable Li-ion 3.7v - 2500mAh 
Battery Life  >2 hours 
  
    
						

							  
5 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP201  
 
Compatibility 
  
Bonitor  MP201  connects  devices  with  AV  output  capab ility,  including  game 
consoles,  mobile  phones,  portable  media  players  and   more.  Here  are  some 
officially verified popular examples (Compatibility  of MP201 is not limited to the 
examples below and the functionality is not guarant eed due to the possibility of 
different setups and environments.):  
Category Model 
Game Consoles  Sony Playstation 2 
  Sony Playstation 3 
  Sony PSP 
  Microsoft Xbox 360 
  Nitendo Wii 
Mobile Phones  Apple iPhone 
  Nokia N79 
  Nokia N95 
  Nokia N96 
  Nokia 5800XM 
Portable Media Players  Apple iPod Touch 
  Apple iPod Classic 
  Apple iPod Nano 
Others  DVD Player 
  Digital Video Camcorder 
  Digital Camera 
  
    
						

							  
6 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP201  
 
Operating Instructions 
 
Recharging MP201 
  
Slide  the  power  switch  to  OFF  mode  and  recharge  MP2 01  with  the  included 
AC  adaptor  /  charger.  LED  light  flashes  once  per  se cond  during  recharging. 
Full  recharge  takes  probably  4-5  hours.  LED  light  w ill  stop  flashing  once  the 
battery is fully recharged.
   
  
Functioning MP201 
 
1. Connecting a device  
MP201  auto-detect  video  signals  from  an  external  vi deo  device  with  correct 
cable connection. (1) Connect the included RCA cabl e to MP201. (2) Connect 
another RCA cable to your video device. (3) Connect  two RCA cables with the 
included RCA adaptor.    
2. Turning to video output mode  
Manual  settings  should  be  required  for  your  video  d evice.  Turn  your  video 
device to video output mode. If you have problems o n turning it to video output 
mode,  please  consult  the  documentation  of  your  vide o  device  or  the 
manufacturer.    
3. Powering on  
Slide  the  power  switch  of  MP201  to  ON  mode.  The  LED   light  will  turn  on  and 
project  the  detected  signals.  If  no  video  signal  is   detected,  MP201  will  not 
project anything and the LED light will flash twice  per second.   
     
						

							  
7 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP201  
 
LED Light 
LED light indicates the situations of MP201. Learn  more indications from LED 
light mode.   
Situations LED light mode 
Projecting  LED light turns on without flashing 
Recharging  LED light flashes once per second 
No Signal  LED light flashes twice per second 
Low Power  LED light flashes ten times per second 
Overheat  LED light flashes ten times per second 
 
Image Size 
Distance  between  MP201  and  the  display  decides  the  image  size.  The 
following table gives a quick reference for the rel ationship. 
 
Distance Image Size 
9 Inch  5.7 Inch 
16 Inch  10.2 Inch 
32 Inch  20.4 Inch 
80 Inch  50.9 Inch 
118 Inch  75.2 Inch 
 
Focus Adjustment  
Rotate the focus wheel until the projected image is  satisfactory. 
   
    
						

							  
8 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP201  
 
Trouble Shooting 
  
Slide  the  power  switch  to  OFF  mode  and  recharge  MP2 01  with  the  included 
AC  adaptor  /  charger.  LED  light  flashes  once  per  se cond  during  recharging. 
Full  recharge  takes  probably  4-5  hours.  LED  light  w ill  stop  flashing  once  the 
battery is fully recharged.
   
 
Situations Problems and Solutions 
No Projection  1.  Power is off 
Turn the projector on  
2.  No input signal 
Turn your video device to video output mode 
Blurred Image  1.  Not focused Rotate  the  focus  wheel  until  the  projected  image  is  
satisfactory  
2.  Out of range 
Place MP201 within the distance range 
  
    
						

							  
9 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP201  
 
Safety Statements 
 
CE Statement 
  
This  product  is  herewith  confirmed  to  comply  with  a pplicable  directive 
2004/108/EC Electromagnetic Compatibility (as amend ed) in accordance with 
European Union Rules.  
The equipment was passed. The test was performed ac cording to the following 
applicable standards: 
EMC 
EN 55022: 2006 
EN55024: 1998+A1: 2001+A2: 2003 
EN61000-3-2: 2006 
EN61000-3-3: 1995+A1: 2001+A2: 2005  
FCC Statement Class B 
 
This equipment has been tested and found to comply  with the limits for a class 
B  digital  device,  pursuant  to  Part  15  of  the  FCC  ru les.  These  limits  are 
designed  to  provide  reasonable  protection  against  h armful  interference  in  a 
residential  installation.  This  equipment  generates  uses  and  can  radiate  radio 
frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the 
instructions,  may  cause  harmful  interference  to  rad io  communications. 
However,  there  is  no  guarantee  that  interference  wi ll  not  occur  in  a  particular 
installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or 
television reception, which can be determined by tu rning the equipment off and 
on, the user is encouraged to try to correct the in terference by one or more of 
the following measures:  
- Reorient or relocate the receiving antenna 
- Increase the separation between the equipment and  receiver 
- Connect the equipment to an outlet on a circuit d ifferent from that to which the 
receiver is connected 
- Consult the dealer or an experienced radio/TV tec hnician for help