Bosch 7412 G User Manual

EN
Program Entry Guide
Control Panels
D9412G/D7412G 

D9412G/D7412G | Program Entry Guide |EN | 2
Bosch Security Systems | 1/04 | 47775E
Trademarks
CoBox is a registered trademark of Lantronix®.
Windows
® is either a registered trademark of Microsoft
Corporation in the United States and/or other
countries.
Documentation Conventions
Type Styles Used in this Manual
To help identify important items in the text, the
following type styles are used:
Bold textUsually indicates selections that
you might use while programming
your control panel. It can also...

D9412G/D7412G | Program Entry Guide | Table of ContentsEN | 3
Bosch Security Systems | 1/04 | 47775E
Table of Contents
1.0 Introduction ....................................................... 5
1.1 How to use this Program Entry Guide ............. 5
1.2 Literature Referenced......................................... 5
1.3 Differences Between the D9412G and
D7412G ............................................................... 5
1.4 New Features....................................................... 6
1.5...

D9412G/D7412G | Program Entry Guide | Table of ContentsEN | 4
Bosch Security Systems | 1/04 | 47775E
6.7 Miscellaneous .................................................. 127
6.8 Cross Point Parameters .................................. 128
7.0 RADXAXS ..................................................... 131
7.1 Door Profile ..................................................... 131
7.2 Strike Profile .................................................... 133
7.3 Event Profile...

D9412G/D7412G | Program Entry Guide | 1.0 IntroductionEN | 5
Bosch Security Systems | 1/04 | 47775E
1.0 Introduction
1.1 How to use this Program Entry Guide
This guide addresses the programming of the
D9412G/D7412G Control Panels only, and should not
be used in conjunction with other control panels.
Although this guide specifically refers to the D9412G
Control Panels, it can be used for programming the
D7412G Control Panels. Differences between the
D9412G and D7412G are shown Table 2.
1.2 Literature...

D9412G/D7412G | Program Entry Guide | 1.0 IntroductionEN | 6
Bosch Security Systems | 1/04 | 47775E
1.4 New Features
The items shown Table 3 are new features added to the D9412G/D7412G Control Panels since version 6.10.
Table 3: New Features
Feature Description
Ground Fault Detect
(Version 6.10)
For the D9412G/D7412G to detect ground fault conditions, the earth ground terminal on the
control panel was electrically isolated from all other terminals. A ground fault detect enable switch
(S4) was added to...

D9412G/D7412G | Program Entry Guide | 1.0 IntroductionEN | 7
Bosch Security Systems | 1/04 | 47775E
Table 3: continued
Feature Description
Fire Trouble Resound
Mode (Version 6.30)
To help our Bosch Security Systems dealers program this feature more easily, the prompt, Fire
Trouble Resound was added to Section 6.7 Miscellaneous.
Sked Functions (Version
6.30)The D9412G and D7412G can be programmed to execute Sked 28 (Expanded Off-Normal Test
Reports) and Sked 29 (Non-Expanded Off-Normal Test Reports)....

D9412G/D7412G | Program Entry Guide | 1.0 IntroductionEN | 8
Bosch Security Systems | 1/04 | 47775E
1.5 Product Handlers
Programming the 9000 Series requires multiple product handlers. The availability of each handler is indicated in
Table 4. See the control panel specific Release Notes to determine the most up-to-date handler versions.
Although the handlers shown in Table 4 can be used to program any of the new control panels, not all of the
functions operate. For example, the RADXUSR1 Handler is used...

D9412G/D7412G | Program Entry Guide | 1.0 IntroductionEN | 9
Bosch Security Systems | 1/04 | 47775E
1.7 Programming the Control Panel
with the D5200 Programmer
Latch the jumper in the upper right hand corner of
the control panel labeled as RESET on the PCB and
Reset Pin on the faceplate.
Connect the molex end of the cord to the connector
labeled PROG on the PCB and PROG CONN on
the faceplate.
Always initiate a control panel copy at the
NEWRECORD or FILENAME display when pressing
the [RECV] (copy) key of...

D9412G/D7412G | Program Entry Guide | 1.0 IntroductionEN | 10
Bosch Security Systems | 1/04 | 47775E
Notes: