Bosch Gts 10 J Manual

  | 11
Bosch Power Tools1 609 92A 15R | (26.1.15)
UU
T2T158
57541718
554756
5959
6060
OBJ_BUCH-1325-003.book  Page 11  Monday, January 26, 2015  1:18 PM 

1 609 92A 15R | (26.1.15)Bosch Power Tools
12 |  
Y2Y1
XW
V
66
27
31
63
64
61
38
62
124
51
65
33
6.x*
71
35
OBJ_BUCH-1325-003.book  Page 12  Monday, January 26, 2015  1:18 PM 

  | 13
Bosch Power Tools1 609 92A 15R | (26.1.15)
Y6
Y5
Y4Y3
303037
6821
6864
68
69
3
672322
10
OBJ_BUCH-1325-003.book  Page 13  Monday, January 26, 2015  1:18 PM 

1 609 92A 15R | (26.1.15)Bosch Power Tools
14 |  
Z
OBJ_BUCH-1325-003.book  Page 14  Monday, January 26, 2015  1:18 PM 

 English | 27
Bosch Power Tools1 609 92A 15R | (26.1.15)
English
Safety Notes
General Power Tool Safety Warnings
When using electric tools basic safety 
precautions should always be followed 
to reduce the risk of fire, electric shock and personal injury in-
cluding the following.
Read all these instructions before attempting to operate 
this product and save these instructions.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 
power...

28 | English 
1 609 92A 15R | (26.1.15)Bosch Power Tools
Safety Warnings for Table Saws
Never stand on the power tool. Serious injuries can occur 
when the power tool tips over or when inadvertently com-
ing into contact with the saw blade.
Take care that the blade guard operates properly and 
can move freely. Always adjust the blade guard in such a 
manner that it faces loosely against the workpiece when 
sawing. Never clamp the blade guard when it is open.
Keep hands away from the cutting area while...

 English | 29
Bosch Power Tools1 609 92A 15R | (26.1.15)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire 
and/or serious injury.
Intended Use
The power tool is intended as a stationary machine for making 
straight lengthways and crossways cuts in hard and soft-
wood, as well as in particle and fibre board. In this, mitre an-
gles  from – 60 ° to +60 ° as well as bevel angles from...

30 | English 
1 609 92A 15R | (26.1.15)Bosch Power Tools
30Retaining bracket for storage of the auxiliary parallel 
guide
31Chip ejector
32Extraction adapter
33Fixture for storage of the blade guard
34Insert-plate notches
35Clamping handle of the parallel guide
36V-guide of parallel guide 
37Auxiliary parallel guide
38“Auxiliary parallel guide” fastening kit
39Guide rail of the angle stop
40“Profile rail” fastening kit
41Fastening screw for chip ejector
42Clamping nut
43Spindle lock lever
44Clamping...

 English | 31
Bosch Power Tools1 609 92A 15R | (26.1.15)
Assembly
Avoid unintentional starting of the machine. During as-
sembly and for all work on the machine, the power plug 
must not be connected to the mains supply.
Delivery Scope
Please also observe the representation of the 
delivery scope at the beginning of the operat-
ing instructions.
Before starting the operation of the machine 
for the first time, check if all parts listed be-
low have been supplied:
– Table saw with mounted saw blade 26...

32 | English 
1 609 92A 15R | (26.1.15)Bosch Power Tools
Mounting the Angle Stop (see figures E1 – E2)
– Insert the guide rail 39 of the angle stop 3 into one of the 
guide grooves 5 of the saw table intended for this purpose.
For improved placement of long workpieces, the angle stop 
can be extended with profile rail 28.
– If required, mount the profile rail to the angle stop with fas-
tening kit 40.
Dust/Chip Extraction
Dusts from materials such as lead-containing coatings, some 
wood types, minerals...