Bosch WAQ 24461 SN User Manual

							123456
End of programme when ...
...$  (Start/Reload)flashes and  -¯-  appears on the display panel.
Note : If display panel lighting is switched off, press a ny button a Energy 
saving mode,  page 5.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  Sköljning/Centrifugering ( Rinse/Spin).
– Press $ (Start/ Reload).
Programmes at lower temperatures: 
– Select Sköljning /Centrifugering (Rinse/Spin) (deactivate
cSuper 
(Extra rinse)  button) or Urpumpning (Empty) .
– Press $ (Start/ Reload).
Changing the programme if ...
... you have selected the wrong programme by mistake: 
– Reselect the programme.
– Press $ (Start/ Reload). The new programme starts from the 
beginning.
Reloading laundry if ... apage 5
... Press  $ (Start/ Reload ); both  the symbols „§‚+,  are displayed 
on the display panel. If  ǯ is lit, the washing machine door cannot be 
opened. 
Press $ (Start/ Reload).
Correct installation according to the separate  
installations actions.
Checking the machine
– Never use a damaged machine! 
– Contact customer service!
Connecting the mains plug
Make sure your hands are dry!  
Handle the plug only!
Turning on the tap
Compartment II
: detergent for the main wash, water softener,
bleach, stain remover
Sorting and loading laundry
Follow the manufacturers care information!
Sort laundry according to the labels indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load 
aPage 7.
Observe important information!aPage 6
Wash laundry of different sizes in the same wash prog ramme.
Close the door. Take care not to trap items of laund ry between the washing machine door and
seal.
 Add detergent and care products
Measure detergent according:
amount of laundry, soiling, water hardness (ask your  water supply company) and
manufacturers instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and  place in the drum.
Your washing machine
Congratulations on having opted for a modern, high-quality domestic a ppliance 
manufactured by Bosch. This washing machine is distin guished by its economical 
energy consumption. 
Each machine that leaves our factory has been inspec ted thoroughly to ensure that it 
functions properly and is in perfect condition. 
For further information on our products, accessories,  spares and services, consult our 
website www.bosch-home.com or contact any of our custom er service centres.
You can find the contact details for your nearest af ter-sales service here or in the after-
sales service directory (depending on model). – GB  0844 8928979 (calls from a BT landline will be charged at up to 3 
pence 
per minute. A call set-up fee of up to 6 pence may app ly)
– IE  01450 2655
Environmentally friendly waste disposal 

All packaging must be disposed of in accordance with  environmental guidelines.
This appliance is certified in accordance with Europ ean Directive 2002/96/CE on the 
waste electrical and electronic equipment (WEEE). 
This directive provides the framework for the EU-wid e collection and reuse of used 
appliances.
Intended use
ContentsPage 
‹Intended use ...................................... ................................................. 1
‹Programmes ......................................... ............................................... 1‹Setting and adjusting the programme ............... ............................ 3
‹Washing ........................................................................................... 3/4
‹After washing ..................................... ................................................. 4‹Individual settings  ............................... ........................................... 5/6
‹Important information  ............................. .......................................... 6
‹Overview of programmes  ............................. ................................... 7‹Safety instructions  ............................................................................. 8
‹Consumption values  ................................ ......................................... 8
‹Care and cleaning  ............................................................................. 9‹Information on the display panel  .................. .................................. 9
‹Maintenance  .................................................................................... 10
‹What to do if ...  ................................................................................ 11

Protection of the environment/Conservation tips– Always fill the washing machine with a maximum amoun t of 
laundry for the relevant programme.
– Wash normally soiled laundry without a pre-wash. 
– Instead of  Bomull (Cottons) 
90 °C , choose the programme 
Bomull (Cottons) 60 °C  with the additional function 
EcoPerfect j. Comparable cleaning result was significantly 
lower energy consumption.
– Measure the detergent according to the manufacture rs 
instructions and water hardness.
– If the laundry is then dried in the tumble dryer,  select spin speed 
according to instructions of dryer manufacturer.
Preparation Before the first wash,
run a wash cycle with no laundry in the machine  aPage 9.
Setting** and adjusting programmes
Programmes
Detailed overview of programmes apage 7
.
Temperature and spin speed can be selected individu ally, 
irrespective of the selected programme and programm e 
progress.
Bomull (Cottons)hard-wearing fabrics
+ Förtvätt (Prewash)hard-wearing fabrics, prewash
Syntet  
(Easy-Care)synthetic fabrics
+ Förtvätt (Prewash)synthetic fabrics, prewash
MixDifferent types of laundry
Fintvätt/Siden  
(Delicate/Silk)Delicate washable fabrics
ÿYlle (Wool)Hand/machine washable wool
Sköljning/ 
Centrifugering  
(Rinse/Spin)Laundry washed by hand,  cSuper (Extra rinse)
button activated; if only using the spin cycle, deacti- 
vate the button
Urpumpning (Empty)Drain rinsing water with  c(without final spin)
Skoncentrifugering  
(Gentle spin)Laundry washed by hand with a reduced spin speed
Supersnabb 15’ 
(Super Quick)Short programme
Syntet special  
(Dark Wash)Hard-wearing fabrics
Extra fint (Lingery)Lingery programme
Sportmicrofibre fabrics
Sensitivehard-wearing fabrics
Washing
1
2
Removing the washing
Open the washing machine door and remove the washin g.
If    (without final spin) is active: turn the programme  selector to 
Urpumpning (Empty)  or select the spin speed. 
Choose $ (Start/ Reload).
– Remove any foreign objects. Risk of rusting. 
– Leave the washing machine door and detergent door ope n 
so that any residual water can evaporate. 
Turn the tap off
Not required for Aqua-Stop models aRefer to Installation instructions .
Switching off
Turn the programme selector to  Från (Off).
Washing
Compartment ~: Fabric softener, bleach
Compartment I : Detergent for prewash
‹for domestic use only,
‹for washing machine-washable fabrics and  
hand-washable wool in detergent solution, 
‹to be operated with cold or cold and hot (max. 60 ºC ) 
drinking water, depending on model, and commercially  
available detergents and care products which are sui ta-
ble for use in washing machines.
.
– Follow the safety instructions on page 8! 
– Do not leave children unattended near the 
washing machine.
– The washing machine is not to be used by  children or persons not familiar with the  
operating instructions.
– Keep pets away from the washing machine.
Dilute viscous fabric softener and fabric condition er with water. 
This prevents blockages.
Individual settings
‘Option buttons
You can change the spin speed and the temperature be fore the selected programme starts and while it is running. The 
effects depend on the programme progress.
‘V (Temperature  °C)
You can change the displayed washing temperature. Th e maximum selectable temperature depends on the curr ent 
programme.
‘ (Ready in)
When you select the programme, the relevant programme  duration is displayed. You can delay the end of the 
programme before it begins. The ready in-time can be  set in increments of one hour up to a maximum of 24 h ours. 
Press the  
 (Ready in)  button until the required number of hours is displ ayed (h = hour). Choose $ (Start/ Reload). 
‘	 (spin speed in rpm/   (without final spin))
You can change the displayed spin speed. The maximum  selectable spin speed depends on the model and which 
programme is currently selected. 
‘Additional functions aOverview of programmes , page 7
SpeedPerfect  i For washing in a shorter time with a washing outcome  comparable to that of the 
standard programme. Maximum load 
aOverview of programmes,  page 7.
EcoPerfect j For saving energy with a washing performance compar able to that of the standard 
programme.
S (Reduced Ironing) Special spin sequence with subseque nt fluffing. Gentle final spin: residual moisture in 
the laundry slightly increased.
cSuper (Extra rinse) Additional rinse cycle. For areas with very soft water 
or for further enhancing the spin 
result.
‘Childproof lock
( in the display panel You can lock the washing machin e to prevent the functions you have set from being 
changed inadvertently. 
ON/OFF:  after the start/end of the programme, press and hol d $ (Start/Reload) for 
approx. 5 seconds. 
Note: The childlock can remain activated until you  wish to start the next programme, 
even after switching off the machine. 
Then you can deactivate the childlock before starting  the programme and activate it 
again as necessary once the programme has started. 
Note: – The  ( symbol is lit: Childlock active.
– The  ( symbol flashes: Childlock active and then the programme se lector is altered. 
To prevent the programme from stopping, move the pro gramme selector back to 
the original programme, the  ( symbol is lit again.
‘Reloading
„§‚+o,
in the display panel Press 
$ (Start/ Reload ) if you want to add additional items of laundry afte r the 
programme has started. The machine checks whether relo ading is possible.
„
§‚+ ,  are lit: reloading is possible.
ǯ flashes: wait until  „§‚+,  are lit.
Note : do not open the door until  both the „§‚+,  symbols are lit.
ǯ: it is not possible to reload.
Note : for safety reasons, the washing machine door remain s locked when the water 
level and/or temperature is high, or during spinning. 
To continue the programme, press the  $ (Start/ Reload)
button.
‘Energy saving mode
The display panel lighting goes out after a few min utes, $ (Start/Reload ) flashes. Press any button to switch on the 
lighting.
‘$ (Start/Reload)
To start the programme or to subsequently load additiona l laundry, and to activate/deactivate the childproof lock.
Individual settings  z
‘Signal
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders,  additives and cleaning agents, you must follow the 
manufacturers instructions..
– Empty all pockets 
– Check for metal items (paper-clips, etc.).
– Wash delicates in a laundry bag (tights, curtains, un derwired bras).
– Fasten zips, do up any buttons. 
– Brush sand out of pockets and collars. 
– Remove curtain fittings or place in the laundry bag.
 Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additi onal function SpeedPerfect .i
Pre-treat any stains as necessary. 
intense wash Load less laundry. Choose a programme wi th a prewash.
Soaking       Load laundry of the same colour.
Pour soaking agent/detergent into compartment  II in accordance with the manufacturers instructions.  Turn the 
programme selector to  Bomull (Cottons)30 °C  and press   $ (Start/ Reload). After approx. 10 minutes, press  $
(Start/ Reload ) to pause the programme. Once the required soaking tim e has elapsed, press $ (Start/ Reload)
again 
to continue the programme, or select a different program me.
Starch      Laundry should not be treated with fabric softener.  
Starching is possible in all wash programmes if liqu id starch is used. Pour the starch in accordance with th e 
manufacturers instructions into fabric softener compa rtment ~ (rinse first if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantit ies. Salt may damage stainless steel. Always follow the dye 
manufacturers instructions. Do  not use the washing machine for bleaching clothes.
Insert for liquid detergent    depending on model
Position the insert for dispensing liquid detergent :
– Remove the detergent drawer completely  apage 9
– Slide the insert forwards and click into place. 
Do not use the insert (slide upwards): for gel dete rgents and washing powder, 
for programmes with  + Förtvätt(Prewash)
and End time option.
Set to • 1 step, the display  
panel lights up press and 
hold
+1 step, release
set to •
setting the volume*
setting the volume* 1 step
* if necessary, select the  
function several times
1.
Activating the mode  
for setting the signal  
volume
2. Setting the volume 
for...
direct
Button signals Information signals
j
j
3
Detergent drawer with  
compartments  I, II, ~
Door
Drum
Control panel
Service door
7  - 90 ºCV (temp. ºC) Select the temperature ( 7 = cold)
1 - 24 h  (Ready in) End of programme after ...
 - 1400*c	 (rpm) Select the spin speed (* depending on the mod el) or c(without final 
spin, laundry soaks in the last rinsing water, display  panel - - - )
Status displays Programme sequence displays:
1üü2 üü	c ü- ¯ -    Wash, rinse, spin, programme duration or end (-0-)
(Childproof lock apage 5
,Open the washing machine door, reload laundry  apages 4, 5
Display panel /  
option buttonsAdditional functionsStart /
Reload
Programme selector for  
switching the machine on  
and off and for selecting the  
programme. Can be turned  
in either direction.
**If the  ( symbol flashes in the 
display panel, the childproof lock is  
active 
aDeactivate childproof lock,
page 5 .
Additional functions and option  
buttons 
aIndividual settings, 
page 5 .
Press $ (Start/Reload)
All buttons are sensitive and need  
only to be touched lightly. Press and  
hold the  
(Ready in) option button 
for an automatic run through all 
setting options.
Programme selector
123456
Insert for liquid detergent (depending on model)  apage 6
123456
Do not switch on the washing machine until you have  read these
instructions and the separate Installation instruction s!
           
						

							7
Overview of programmes 
aRefer to the table of consumption values on page 8, and  advice and warnings on page 6.
Programmes °C max. Type of laundry
Additional functions; InformationBomull  
(Cottons)
7 - 90 °C
7 kg/
4 kg* hard-wearing fabrics, cottons or linen that can be  
washed at 90°C
SpeedPerfect 
i*, EcoPerfect j,S (Reduced Ironing), 
c
Super (Extra rinse) 
+ Förtvätt  
(Prewash)Sensitive
7 - 60 °C colour fast cottons or linen SpeedPerfect 
i*, EcoPerfect j,S (Reduced Ironing), 
c
Super (Extra rinse);
for particularly sensitive skin; longer wash progra mme at selected temperature, higher 
water level, additional rinse cycle
Syntet  
(Easy-Care)
7  - 60 °C
3.5 kgeasy-care cotton, linen, synthetic or blended fabrics
SpeedPerfect i, EcoPerfect j,S (Reduced Ironing), 
c
Super (Extra rinse)
+ Förtvätt  
(Prewash)Mix
7 - 40 °C cotton or synthetic fabrics SpeedPerfect
i, EcoPerfect  j,S (Reduced Ironing), 
c
Super (Extra rinse);
different types of laundry can be washed together
Syntet special  
(Dark Wash)
7  - 40 °C dark cotton and dark synthetic fabrics SpeedPerfect
i, EcoPerfect  j,S (Reduced Ironing), 
c
Super (Extra rinse);
reduced rinse and final spin cycle
Fintvätt/Siden  
(Delicate/Silk)
7  - 40 °C
2kgfor delicate fabrics, e.g., silk, satin, synthetic f
ibres or 
blended fabrics (e.g. curtains) SpeedPerfect
i, EcoPerfect j,S (Reduced Ironing), 
c
Super (Extra rinse): 
no spin between rinse cycles
ÿ Ylle (Wool)
7  - 40 °C hand/machine washable wool particularly delicate wash programme to avoid shrin
kage of laundry; 
longer programme breaks (fabrics rest in the deterg ent solution)
Supersnabb 15’  
(Super Quick)
7 - 40 °C synthetic cotton, linen, synthetic fibres or blended  
fabrics short programme of approx. 15 minutes,  
suitable for lightly soiled laundry
Sport
7
 - 40 °C microfibre fabrics
SpeedPerfect i, EcoPerfect j,S (Reduced Ironing), 
c
Super (Extra rinse)
Extra fint (Lingery)
7 - 40 °C 1 kg Lingery
SpeedPerfecti,EcoPerfect  j,S (Reduced Ironing), 
c
Super (Extra rinse)
Additional programmes Sköljning/Centrifugering (Rins e/Spin), Urpumpning (Empty), Skoncentrifugering (Gentle spin)
* reduced load with additional function  SpeedPerfecti.
For programmes without prewash, add detergent to co mpartment II. For prewash programmes, distribute the detergent b etween compartments Iand  II.
9205 / 9000617892
9000617892
WAQ28461SN /...
Robert Bosch Hausgeräte GmbH CarläWery Str. 34
81739 Munich / Germany
8
Safety instructions
– Carefully read the instruction manual and the informati on enclosed, and act accordingly.
– Keep the machines documentation for future referenc e.
Risk of electric shock!– Never pull the cable to disconnect the mains plug! 
– Never insert/disconnect the mains plug with damp h ands.
Danger to life!For worn-out appliances: 
– Disconnect the mains plug. 
– Sever the mains cable and discard along with the p lug.
– Destroy the lock on the washing machine door. This  will prevent children from 
locking themselves in and risking their lives.
Danger of suffocation! – Keep packaging, film and packaging parts out of the r each of children.
Risk of poisoning!– Keep detergents and care products out of the reach  of children.
Risk of explosion!– Items of laundry pretreated with cleaning agents co ntaining solvents, e.g. stain 
remover/cleaning solvent may lead to an explosion a fter being loaded into the 
washing machine. 
Rinse items of laundry thoroughly by hand beforehand .
Risk of injury!– The washing machine door may become very hot. 
– Be careful when draining hot detergent solution. 
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door. 
– Do not reach into the drum if it is still rotating. 
– Be careful when opening the detergent drawer while  the machine is in operation.
 Consumption values  depending on model
Programme Load Electricity***Water***Programme
duration***
Bomull  7](cold) 7 kg 0.27 kWh 66 l 145 min 
Bomull 30 °C* 7 kg 0.39 kWh 66 l 145 min 
Bomull 40 °C* 7 kg 1.02 kWh 66 l 155 min
Bomull 60 °C* 7 kg 1.15 kWh 66 l 165 min
Bomull 90 °C 7 kg 2.10 kWh 76 l 155 min
Syntet 40 °C* 3.5 kg 0.64 kWh 55 l 103 min
Mix  40 °C 3.5 kg 0.54 kWh 47 l 60 min
Fintvätt/Siden 30 °C 2 kg 0.19 kWh 34 l 41 min
Ylle 30 °C 2 kg 0.17 kWh 39 l 40 min
* Programme setting for testing in accordance with vali d standard EN60456.
Note on comparative tests: For testing the test program mes, wash the specified load using the maximum spin speed.
ProgrammeAdditional 
function Load
Annual energy 
consumption Annual water  
consumption
Bomull
40/60 °C  EcoPerfect  j** 7/3.5 kg 174 kWh 8140 l
** Programme setting for testing and energy labelling in  accordance with EU directive 2010/30/EU with cold wate r (15 ºC).
*** The values deviate from the indicated values depe nding on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, d etergent used, fluctuations in the power supply and  selected additional 
functions.
9
Care and cleaning 
Before the first wash
Do not put laundry in the machine! Turn on the tap.  Put into compartment II:
– approx. 2 litres of water  
– detergent (measure according to the manufacturers  instructions for lightly soiled laundry and water hardness)
Turn the programme selector to  Syntet (Easy-Care) 60 °C and press $ (Start/ Reload) . At the end of the programme, turn 
the programme selector to  Från (Off).
Machine housing, control panel
– Remove detergent and cleaning agent residue. 
– Wipe with a soft, damp cloth.
– Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener res idues.
1.Pull out, press insert down and remove drawer compl etely.
2. To remove the insert: press upwards from below with  your finger.
3. For models with insert for liquid detergent:Slide t he insert upwards and remove it from the back.
4. Clean the detergent dispenser tray and inserts with  water and a brush and dry them.
5. Attach the insert and engage (connect the cylinder  to the guide pin).
6. Push in the detergent drawer.
Leave the detergent drawer open so that any residua l water can evaporate.
Drum
Leave the washing machine door open so that the dru m can dry out.For rust stains, use chlorine-free cleaning agent, not steel wool.
Descaling            Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of  detergent is used. If it is, descale the appliance according to the 
manufacturers instructions. Descaling products can  be acquired on the website or from customer services a Installation 
instructions .
Emergency release        e.g. in the event of a power cut
The programme continues to run when the power has b een restored. However, if the laundry has to be removed, the 
washing machine door can be opened as follows: 
Risk of scalding! 
The detergent solution and laundry may be hot. Let  it cool.
Do not reach into the drum if it is still rotating. 
Do not open the washing machine door if water can b e seen through the glass.
1.Turn the programme selector to  Från (Off) and disconnect the mains plug.
2. Drain the detergent solution  apage 10 .
3. Pull the emergency release downwards with a tool an d release.
The washing machine door can then be opened.
Information on the display panel   depending on model
, flashes Close the washing machine door properly; laun dry may be caught.
§:³Å,
§: ›ÉTurn on the  (cold water) tap fully, supply hose kinke d or trapped;
Clean the filter  apage 10 , water pressure too low.
§:³µ– Detergent solution pump blocked; Clean the detergent sol ution pump apage 10.
– Drainage hose / waste pipe blocked; Clean the draina ge hose at the siphon apage 10 .
– Heavy foam build-up  apage 11 , status indicator  1 flashes.
§:›´Water in the base tub, appliance leaking. Call custo mer services!
©:³¯– Open the (hot water) tap fully. 
– Inlet hose kinked/trapped.
– Water pressure too low. Clean the filter  apage 10 .
– Hot water hose not connected; appliance will operate u sing cold water only. Ignore information, only for first 
wash cycle.
( Childproof lock activated: to deactivate  apage 5 .
–Risk of electric shock!  Disconnect the mains plug.
– Risk of explosion! Do not use solvents.
910
Maintenance
Detergent solution pump
Turn the programme selector to  Från (Off) and disconnect 
the mains plug.
1. Using a screwdriver or the insert for liquid detergent  
(depending on model), open and remove the service f lap.
2. Remove the folding gutter and place a large enough  container underneath.
3. For models with a drainage hose:  Remove the drainage hose from the retainer and pul l it 
from the housing. 
Remove the sealing cap, allow the detergent solutio n to flow out into the container. Replace 
the sealing cap and place the drainage hose in the r etainer.
3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the 
detergent solution begins to flow out on the foldin g gutter. When the container is full, close 
the pump cover and empty the container. Repeat the a bove steps until all the detergent 
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be resid ual water).
5. Clean the interior, pump cover thread and pump housin g (the impeller in the detergent 
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage hose (depending on model) and t he folding gutter to their start position.
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight int o the drain during the next wash: 
Pour 2 litres of water into compartment  II and then start the  Urpumpning (Empty)  programme.
Drainage hose at the siphon
Turn the programme selector to  Från (Off) and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainag e hose (residual water).
2. Clean the drainage hose and siphon connecting piece .
3. Reattach the drainage hose and secure the connection with  the hose clamp.
Filter in the water supply
Risk of electric shock! 
Do not immerse the Aqua-Stop safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose: 
1. Turn off the tap.
2. Select any programme (except  Sköljning/Centrifugering (Rinse/Spin) // Urpumpning  
(Empty) ).
3. Choose $ (Start/ Reload). Let the programme run for approximately 40 se conds.
4. Turn the programme selector to  Från (Off). Disconnect the mains plug. 
Clean the filter:
5. Disconnect the hose from the tap. 
Clean the filter using a small brush.  
and/or  for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance.  
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
–Risk of burning!
Allow the detergent solution to cool.
– Turn off the tap.
11
What to do if...
‘Water is leaking out – Attach/replace the drainage ho se correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not dispensed. –
$  (Start/Reload ) not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 10 .
– Supply hose kinked or trapped?
‘The appliance door will not  
open. – Safety function active. Programme stopped? 
apage 4 .
–   (without final spin) selected?  apage 3, 4 .
– Can be opened by emergency release only?  apage 9 .
– Door locked after the washing machine is switched o ff: Switch on the washing 
machine and wait for 5 seconds.
‘The selected programme does  
not start. –
$  (Start/Reload )or  (Ready in)  time selected?
– Washing machine door closed? 
– Childproof lock active? Deactivate  apage 5 .
‘Detergent solution is not  
drained. –
  (without final spin) selected?  apage 3, 4 .
– Clean the detergent solution pump  apage 10 .
– Clean the waste pipe and/or drainage hose.
‘No water can be seen in the  
drum. – Not a fault. Water remains inside below the visibl
e area.
‘Spin result not satisfactory. 
Laundry wet/too damp.– Not a fault. Spin control system has stopped the spin
 cycle. Uneven distribution of 
laundry.
Distribute large and small items of laundry evenly in  the drum.
– S (Reduced Ironing)  selected? apage 5 .
– Selected speed too low?  apage 5 .
‘Programme duration changes  
suddenly during operation. – Not a fault. The program time can vary according t
o the distribution of laundry, with 
it therefore being possible for the display panel to  show adjustments in the 
duration.
‘Spin cycle performed several  
times. – Not a fault. The balance control system has detected 
an imbalance and is 
attempting to redress this by repeating the spin.
‘Residual water in the  
compartment for care products. – Not a fault: the action of the care product is not
 affected.
– Clean the compartment if necessary  apage 9 .
‘Odour formation in the washing  
machine. – Run programme 
Bomull (Cottons)90 °C  without laundry. Use standard 
detergent.
‘Status display  1 flashing.
Appliance has detected a  
detergent overload. – Too much detergent used?
If foam is escaping from the detergent drawer: mix  1 tablespoon of fabric softener 
with ½ litre of water and pour into compartment  II(not with outdoor or down 
fabrics) .
– Reduce the detergent dosage for the next wash cycle .
‘Intense noise formation,  
vibrations and wandering  
during the spin cycle.– Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions .
– Transportation safety devices removed? Remove transportation safety devices aInstallation instructions .
‘Display panel/indicator lamps  
remain turned off while the  
machine is working. – Energy-saving mode 
apage 5 .
– Power cut?
– Fuses triggered? Reset/change the fuse. 
– If the fault occurs repeatedly, call customer servic es.
‘Programme sequence longer  
than usual.– Not a fault. Unbalanced load detection system adjusts 
imbalance by repeatedly 
distributing the laundry.
– Not a fault: foam detection system active; adds an addi tional rinse cycle.
‘Detergent residues on the  
laundry.– Occasionally, phosphate-free detergents contain wate
r-insoluble residues.
– Select  Sköljning/Centrifugering (Rinse/Spin)  or brush out the laundry after 
washing.
If you cannot correct a fault yourself or if a repa ir is necessary:
– Turn the programme selector to  Från (Off) and remove the mains plug from the socket.
– Turn off the water supply and call customer service sa Installation instructions.
Washing machine
en Instruction manual
                     
						

							12
$¯
a
$
c
$
$
a
$ „
§‚,
ǯ
$
Correct installation according to the separate  
installations actions.
Checking the machine
– Never use a damaged machine! 
– Contact customer service!
Connecting the mains plug
Make sure your hands are dry!  
Handle the plug only!
Turning on the tap
Compartment II
: detergent for the main wash, water softener,
bleach, stain remover
a
a
Close the door. Take care not to trap items of laund
Your washing machine
Congratulations  on having opted for a modern, high-quality domestic ap pliance 
manufactured by Bosch. This washing machine is distin guished by its economical 
energy consumption. 
Each machine that leaves our factory has been inspected t horoughly to ensure that it 
functions properly and is in perfect condition. 
For further information on our products, accessories,  spares and services, consult our 
website www.bosch-home.com or contact any of our custom er service centres.
You can find the contact details for your nearest aft er-sales service here or in the after-
sales service directory (depending on model). – GB  0844 8928979 (calls from a BT landline will be charged at up to 3 penc
e 
per minute. A call set-up fee of up to 6 pence may apply)
– IE  01450 2655
Environmentally friendly waste disposal 

All packaging must be disposed of in accordance with  environmental guidelines.
This appliance is certified in accordance with Europe an Directive 2002/96/CE on the 
waste electrical and electronic equipment (WEEE). 
This directive provides the framework for the EU-wid e collection and reuse of used 
appliances.
Intended use
ContentsPage 
‹Intended use ...................................... ................................................. 1
‹Programmes ......................................... ............................................... 1‹Setting and adjusting the programme ............... ............................ 3
‹Washing ........................................................................................... 3/4
‹After washing ..................................... ................................................. 4‹Individual settings  ............................... ........................................... 5/6
‹Important information  ............................. .......................................... 6
‹Overview of programmes  ............................ .................................... 7‹Safety instructions  ............................................................................. 8
‹Consumption values  ................................ ......................................... 8
‹Care and cleaning  ............................................................................. 9‹Information on the display panel  .................. .................................. 9
‹Maintenance  .................................................................................... 10
‹What to do if ...  ................................................................................ 11

Protection of the environment/Conservation tips– Always fill the washing machine with a maximum amo unt of 
laundry for the relevant programme.
– Wash normally soiled laundry without a pre-wash. 
– Instead of  Bomull (Cottons) 
90 °C , choose the programme 
Bomull (Cottons) 60 °C  with the additional function 
EcoPerfect j. Comparable cleaning result was significantly 
lower energy consumption.
– Measure the detergent according to the manufacturer s 
instructions and water hardness.
– If the laundry is then dried in the tumble dryer,  select spin speed 
according to instructions of dryer manufacturer.
Preparationa
ProgrammesDetailed overview of programmes  apage 7 .
Temperature and spin speed can be selected individu ally, 
irrespective of the selected programme and programm e 
progress.
Bomull (Cottons)hard-wearing fabrics
+ Förtvätt (Prewash)hard-wearing fabrics, prewash
Syntet  
(Easy-Care)synthetic fabrics
+ Förtvätt (Prewash)synthetic fabrics, prewash
MixDifferent types of laundry
Fintvätt/Siden  
(Delicate/Silk)Delicate washable fabrics
ÿYlle (Wool)Hand/machine washable wool
Sköljning/ 
Centrifugering  
(Rinse/Spin)Laundry washed by hand,  cSuper (Extra rinse)
button activated; if only using the spin cycle, deacti- 
vate the button
Urpumpning (Empty)Drain rinsing water with  c(without final spin)
Skoncentrifugering  
(Gentle spin)Laundry washed by hand with a reduced spin speed
Supersnabb 15’ 
(Super Quick)Short programme
Syntet special  
(Dark Wash)Hard-wearing fabrics
Extra fint (Lingery)Lingery programme
Sportmicrofibre fabrics
Sensitivehard-wearing fabrics

$
a
Compartment ~: Fabric softener, bleach
Compartment I : Detergent for prewash
‹for domestic use only,
‹for washing machine-washable fabrics and  
hand-washable wool in detergent solution, 
‹to be operated with cold or cold and hot (max. 60 º C) 
drinking water, depending on model, and commerciall y 
available detergents and care products which are su ita-
ble for use in washing machines.
.
– Follow the safety instructions on page 8! 
– Do not leave children unattended near the 
washing machine.
– The washing machine is not to be used by  children or persons not familiar with the  
operating instructions.
– Keep pets away from the washing machine.
‘
‘V
‘
$
‘	
‘a
i a
j
S
c
‘( $
( 
( 
(
‘„§‚o, $
„
§‚,
ǯ„§‚,
„§‚,
ǯ
$ 
‘$
‘$
z
‘
i
$ $
$ 
~
a
j
j
~
7  - 90 ºCV (temp. ºC) Select the temperature ( 7 = cold)
1 - 24 h  (Ready in) End of programme after ...
 - 1400*c	 (rpm) Select the spin speed (* depending on the mod c
spin, laundry soaks in the last rinsing water, displ ay
Status displays Programme sequence displays:
1üü2 üü	c ü- ¯ -    Wash, rinse, spin, programme duration or end (-0-)
(Childproof lock apage 5
,Open the washing machine door, reload laundry  a
Display panel /  
option buttonsAdditional functions
(
a
a
$

Programme selector
12
Insert for liquid detergent (depending on model)  apage 6
12
Do not switch on the washing machine until you have re ad these
instructions and the separate Installation instructions !
           
						

							34
End of programme when ...
...$  (Start/Reload) flashes and  -¯-  appears on the display panel.
Note : If display panel lighting is switched off, press a ny button a Energy 
saving mode,  page 5.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  Sköljning/Centrifugering ( Rinse/Spin).
– Press $ (Start/ Reload).
Programmes at lower temperatures: 
– Select Sköljning /Centrifugering (Rinse/Spin) (deactivate
cSuper 
(Extra rinse)  button) or Urpumpning (Empty) .
– Press $ (Start/ Reload).
Changing the programme if ...
... you have selected the wrong programme by mistake: 
– Reselect the programme.
– Press $ (Start/ Reload). The new programme starts from the 
beginning.
Reloading laundry if ... a page 5
... Press  $ (Start/ Reload ); both  the symbols „§‚+,  are displayed 
on the display panel. If  ǯ is lit, the washing machine door cannot be 
opened. 
Press $ (Start/ Reload).
Sorting and loading laundry
Follow the manufacturers care information!
Sort laundry according to the labels indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load  aPage 7 .
Observe important information! aPage 6
Wash laundry of different sizes in the same wash progr amme.
Close the door. Take care not to trap items of laundry b etween the washing machine door and
seal.
 Add detergent and care products
Measure detergent according:
amount of laundry, soiling, water hardness (ask your wa ter supply company) and
manufacturers instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and  place in the drum.

‹
‹‹
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹

j
Before the first wash,
run a wash cycle with no laundry in the machine  aPage 9.
Setting** and adjusting programmes
a
ÿ
c
c
Washing
1
2
Removing the washing
Open the washing machine door and remove the washin g.
If    (without final spin) is active: turn the programme  selector to 
Urpumpning (Empty)  or select the spin speed. 
Choose $ (Start/ Reload).
– Remove any foreign objects. Risk of rusting. 
– Leave the washing machine door and detergent door ope n 
so that any residual water can evaporate. 
Turn the tap off
Not required for Aqua-Stop models  aRefer to Installation instructions .
Switching off
Turn the programme selector to  Från (Off).
Washing
~
‹
‹
‹
Dilute viscous fabric softener and fabric condition er with water. 
This prevents blockages.
‘
‘V
‘
$
‘	
‘a
i a
j
S
c
‘( $
( 
( 
(
‘„§‚o, $
„
§‚,
ǯ„§‚,
„§‚,
ǯ
$ 
‘$
‘$
z
‘
i
$ $
$ 
~
a
j
j
3
Detergent drawer with  
compartments  I, II, ~
Door
Drum
Control panel
Service door
7 V 7 = cold)
  (Ready in) End of programme after ...
 c	  (rpm) Select the spin speed (* depending on the mod el) or c(without final 
spin, laundry soaks in the last rinsing water, displ ay panel - - - )
Status displays Programme sequence displays: 1 üü2 üü	c ü¯ Wash, rinse, spin, programme duration or end (-0-)
( apage 5
, Open the washing machine door, reload laundry  apages 4, 5
Start /
Reload
Programme selector for  
switching the machine on  
and off and for selecting the  
programme. Can be turned  
in either direction.
**If the  ( symbol flashes in the 
display panel, the childproof lock is  
active  aDeactivate childproof lock,
page 5 .
Additional functions and option  
buttons  a
Individual settings, 
page 5 .
Press  $ (Start/Reload)
All buttons are sensitive and need  
only to be touched lightly. Press and  
hold the 
(Ready in) option button 
for an automatic run through all 
setting options.
Programme selector
34
a
34
           
						

							56
$¯
a Energy 
$
c
$
$
a
$ „
§‚,
ǯ
$
a
a

‹
‹‹
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹

j
a
a
ÿ
c
c
 $
a
~
‹
‹
‹
Individual settings
‘Option buttons
You can change the spin speed and the temperature be fore the selected programme starts and while it is running. The 
effects depend on the programme progress.
‘V (Temperature  °C)
You can change the displayed washing temperature. Th e maximum selectable temperature depends on the current 
programme.
‘ (Ready in)
When you select the programme, the relevant programme  duration is displayed. You can delay the end of the 
programme before it begins. The ready in-time can be  set in increments of one hour up to a maximum of 24 h ours. 
Press the  
 (Ready in)  button until the required number of hours is displ ayed (h = hour). Choose $ (Start/ Reload). 
‘	 (spin speed in rpm/   (without final spin))
You can change the displayed spin speed. The maximum  selectable spin speed depends on the model and which 
programme is currently selected. 
‘Additional functions a Overview of programmes , page 7
SpeedPerfect  i For washing in a shorter time with a washing outcom e comparable to that of the 
standard programme. Maximum load  aOverview of programmes,  page 7.
EcoPerfect j For saving energy with a washing performance compar able to that of the standard 
programme.
S (Reduced Ironing) Special spin sequence with subsequen t fluffing. Gentle final spin: residual moisture in 
the laundry slightly increased.
cSuper (Extra rinse) Additional rinse cycle. For areas with very soft water or
 for further enhancing the spin 
result.
‘Childproof lock
( in the display panel You can lock the washing machine t o prevent the functions you have set from being 
changed inadvertently. 
ON/OFF:  after the start/end of the programme, press and hol d $ (Start/Reload) for 
approx. 5 seconds. 
Note: The childlock can remain activated until you wis h to start the next programme, 
even after switching off the machine. 
Then you can deactivate the childlock before starting  the programme and activate it 
again as necessary once the programme has started. 
Note: – The  ( symbol is lit: Childlock active.
– The  ( symbol flashes: Childlock active and then the programme selec tor is altered. 
To prevent the programme from stopping, move the pro gramme selector back to 
the original programme, the  ( symbol is lit again.
‘Reloading
„§‚+o,
in the display panel Press 
$ (Start/ Reload ) if you want to add additional items of laundry after  the 
programme has started. The machine checks whether reloa ding is possible.
„
§‚+ ,  are lit: reloading is possible.
ǯ flashes: wait until  „§‚+,  are lit.
Note : do not open the door until  both the „§‚+,  symbols are lit.
ǯ: it is not possible to reload.
Note : for safety reasons, the washing machine door remain s locked when the water 
level and/or temperature is high, or during spinning. 
To continue the programme, press the  $ (Start/ Reload)
button.
‘Energy saving mode
The display panel lighting goes out after a few min utes, $ (Start/Reload ) flashes. Press any button to switch on the 
lighting.
‘$ (Start/Reload)
To start the programme or to subsequently load additional la undry, and to activate/deactivate the childproof lock.
Individual settings  z
‘Signal
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders, a dditives and cleaning agents, you must follow the 
manufacturers instructions..
– Empty all pockets 
– Check for metal items (paper-clips, etc.).
– Wash delicates in a laundry bag (tights, curtains, unde rwired bras).
– Fasten zips, do up any buttons. 
– Brush sand out of pockets and collars. 
– Remove curtain fittings or place in the laundry bag.
 Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additi onal function SpeedPerfect .i
Pre-treat any stains as necessary. 
intense wash Load less laundry. Choose a programme wi th a prewash.
Soaking       Load laundry of the same colour.
Pour soaking agent/detergent into compartment  II in accordance with the manufacturers instructions.  Turn the 
programme selector to  Bomull (Cottons)30 °C  and press   $ (Start/ Reload). After approx. 10 minutes, press  $
(Start/ Reload ) to pause the programme. Once the required soaking tim e has elapsed, press $ (Start/ Reload) again 
to continue the programme, or select a different programm e.
Starch      Laundry should not be treated with fabric softener.  
Starching is possible in all wash programmes if liquid  starch is used. Pour the starch in accordance with the 
manufacturers instructions into fabric softener compa rtment ~ (rinse first if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantitie s. Salt may damage stainless steel. Always follow the d ye 
manufacturers instructions. Do  not use the washing machine for bleaching clothes.
Insert for liquid detergent    depending on model
Position the insert for dispensing liquid detergent :
– Remove the detergent drawer completely  apage 9
– Slide the insert forwards and click into place. 
Do not use the insert (slide upwards): for gel dete rgents and washing powder, 
for programmes with  + Förtvätt(Prewash)
and End time option.
Set to •1 step, the display  
panel lights up press and 
hold+1 step, release
set to 
•setting the volume*
setting the volume* 1 step
* if necessary, select the  
function several times
1.
Activating the mode  
for setting the signal  
volume
2. Setting the volume  
for...direct
Button signals Information signals
j
j
~
7 V 7

 c	 c
1 üü2 üü	c ü¯
( a
, a
(
a
a
$

56
a
56
           
						

							7
Overview of programmes aRefer to the table of consumption values on page 8, and a dvice and warnings on page 6.Programmes °C max. Type of laundry
Additional functions; InformationBomull  
(Cottons)
7 - 90 °C
7 kg/
4 kg* hard-wearing fabrics, cottons or linen that can be  
washed at 90°C
SpeedPerfect 
i*, EcoPerfect j,S (Reduced Ironing), 
c
Super (Extra rinse) 
+ Förtvätt  
(Prewash)Sensitive
7 - 60 °C colour fast cottons or linen SpeedPerfect 
i*, EcoPerfect j,S (Reduced Ironing), 
c
Super (Extra rinse);
for particularly sensitive skin; longer wash progra mme at selected temperature, higher 
water level, additional rinse cycle
Syntet  
(Easy-Care)
7  - 60 °C
3.5 kgeasy-care cotton, linen, synthetic or blended fabrics
SpeedPerfect i, EcoPerfect j,S (Reduced Ironing), 
c
Super (Extra rinse)
+ Förtvätt  
(Prewash)Mix
7 - 40 °C cotton or synthetic fabrics SpeedPerfect
i, EcoPerfect  j,S (Reduced Ironing), 
c
Super (Extra rinse);
different types of laundry can be washed together
Syntet special  
(Dark Wash)
7  - 40 °C dark cotton and dark synthetic fabrics SpeedPerfect
i, EcoPerfect  j,S (Reduced Ironing), 
c
Super (Extra rinse);
reduced rinse and final spin cycle
Fintvätt/Siden  
(Delicate/Silk)
7  - 40 °C
2kgfor delicate fabrics, e.g., silk, satin, synthetic fi
bres or 
blended fabrics (e.g. curtains) SpeedPerfect
i, EcoPerfect j,S (Reduced Ironing), 
c
Super (Extra rinse): 
no spin between rinse cycles
ÿ Ylle (Wool)
7  - 40 °C hand/machine washable wool particularly delicate wash programme to avoid shrin
kage of laundry; 
longer programme breaks (fabrics rest in the deterg ent solution)
Supersnabb 15’  
(Super Quick)
7 - 40 °C synthetic cotton, linen, synthetic fibres or blended  
fabrics short programme of approx. 15 minutes,  
suitable for lightly soiled laundry
Sport
7
 - 40 °C microfibre fabrics
SpeedPerfect i, EcoPerfect j,S (Reduced Ironing), 
c
Super (Extra rinse)
Extra fint (Lingery)
7 - 40 °C 1 kg Lingery
SpeedPerfect
i ,
EcoPerfect 
j,S (Reduced Ironing), 
c
Super (Extra rinse)
Additional programmes Sköljning/Centrifugering (Rins e/Spin), Urpumpning (Empty), Skoncentrifugering (Gentle spin)
* reduced load with additional function  SpeedPerfecti.
For programmes without prewash, add detergent to compa rtment II. For prewash programmes, distribute the detergent b etween compartments Iand  II.
9205 / 9000617892
9000617892
WAQ28461SN /...
Robert Bosch Hausgeräte GmbH
CarläWery Str. 34
81739 Munich / Germany
8
Safety instructions
– Carefully read the instruction manual and the information  enclosed, and act accordingly.
– Keep the machines documentation for future referenc e.
Risk of electric shock!– Never pull the cable to disconnect the mains plug! 
– Never insert/disconnect the mains plug with damp h ands.
Danger to life!For worn-out appliances: 
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug .
– Destroy the lock on the washing machine door. This  will prevent children from 
locking themselves in and risking their lives.
Danger of suffocation! – Keep packaging, film and packaging parts out of the re ach of children.
Risk of poisoning!– Keep detergents and care products out of the reach  of children.
Risk of explosion!– Items of laundry pretreated with cleaning agents con taining solvents, e.g. stain 
remover/cleaning solvent may lead to an explosion af ter being loaded into the 
washing machine. 
Rinse items of laundry thoroughly by hand beforehand .
Risk of injury!– The washing machine door may become very hot. 
– Be careful when draining hot detergent solution. 
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door. 
– Do not reach into the drum if it is still rotating. 
– Be careful when opening the detergent drawer while  the machine is in operation.
 Consumption values  depending on model
Programme Load Electricity***Water***Programme
duration***
Bomull  7](cold) 7 kg 0.27 kWh 66 l 145 min 
Bomull 30 °C* 7 kg 0.39 kWh 66 l 145 min 
Bomull 40 °C* 7 kg 1.02 kWh 66 l 155 min
Bomull 60 °C* 7 kg 1.15 kWh 66 l 165 min
Bomull 90 °C 7 kg 2.10 kWh 76 l 155 min
Syntet 40 °C* 3.5 kg 0.64 kWh 55 l 103 min
Mix  40 °C 3.5 kg 0.54 kWh 47 l 60 min
Fintvätt/Siden 30 °C 2 kg 0.19 kWh 34 l 41 min
Ylle 30 °C 2 kg 0.17 kWh 39 l 40 min
* Programme setting for testing in accordance with va lid standard EN60456.
Note on comparative tests: For testing the test programm es, wash the specified load using the maximum spin speed.
ProgrammeAdditional 
function Load
Annual energy 
consumption Annual water  
consumption
Bomull
40/60 °C  EcoPerfect  j** 7/3.5 kg 174 kWh 8140 l
** Programme setting for testing and energy labelling in a ccordance with EU directive 2010/30/EU with cold water ( 15 ºC).
*** The values deviate from the indicated values depe nding on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, de tergent used, fluctuations in the power supply and se lected additional 
functions.
$
a
a
, §
³Å§›Éa
§
³µa a
a 1
§
›´
©³¯
a
( a
$
‘
‘$
a
‘a
 a
a
‘$ 
a
‘ a
a
‘
‘
S a
a
‘
‘
‘a
‘
‘1
‘a
a
‘a
‘
‘
a
                     
						

							a
7i j S
c
7i j S
c
7
i j S
c
7i j S
c
7i j S
c
7i j S
c
ÿ
7 7 7
i j S
c
7 i j S
c
i
ä
7]
 
 j
9
Care and cleaning 
Before the first wash
Do not put laundry in the machine! Turn on the tap.  Put into compartment II:
– approx. 2 litres of water  
– detergent (measure according to the manufacturers  instructions for lightly soiled laundry and water hardness)
Turn the programme selector to  Syntet (Easy-Care) 60 °C and press 
$ (Start/ Reload). At the end of the programme, turn 
the programme selector to Från (Off).
Machine housing, control panel
– Remove detergent and cleaning agent residue. 
– Wipe with a soft, damp cloth.
– Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener res idues.
1.
Pull out, press insert down and remove drawer compl etely.2.To remove the insert: press upwards from below with your finger.3.For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.4.Clean the detergent dispenser tray and inserts with  water and a brush and dry them.5.Attach the insert and engage (connect the cylinder  to the guide pin).6.Push in the detergent drawer.
Leave the detergent drawer open so that any residua l water can evaporate.
Drum
Leave the washing machine door open so that the dru m can dry out.For rust stains, use chlorine-free cleaning agent, not steel wool.
Descaling            Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of  detergent is used. If it is, descale the appliance according to the 
manufacturers instructions. Descaling products can  be acquired on the website or from customer services a Installation 
instructions .
Emergency release        e.g. in the event of a power cut
The programme continues to run when the power has b een restored. However, if the laundry has to be removed, the 
washing machine door can be opened as follows: 
Risk of scalding! 
The detergent solution and laundry may be hot. Let  it cool.
Do not reach into the drum if it is still rotating. 
Do not open the washing machine door if water can b e seen through the glass.
1.
Turn the programme selector to Från (Off) and disconnect the mains plug.2.Drain the detergent solution  apage 10 .3.Pull the emergency release downwards with a tool an d release.
The washing machine door can then be opened.
Information on the display panel   depending on model
, flashes Close the washing machine door properly; laundry  may be caught.
§:³Å,
§: ›ÉTurn on the  (cold water) tap fully, supply hose kinked or  trapped;
Clean the filter  apage 10 , water pressure too low.
§:³µ– Detergent solution pump blocked; Clean the detergent solutio n pump apage 10.
– Drainage hose / waste pipe blocked; Clean the drainage  hose at the siphon apage 10 .
– Heavy foam build-up  apage 11 , status indicator  1 flashes.
§:›´Water in the base tub, appliance leaking. Call custome r services!
©:³¯– Open the (hot water) tap fully. 
– Inlet hose kinked/trapped.
– Water pressure too low. Clean the filter  apage 10 .
– Hot water hose not connected; appliance will operate usin g cold water only. Ignore information, only for first 
wash cycle.
( Childproof lock activated: to deactivate  apage 5 .
–Risk of electric shock!  Disconnect the mains plug.
– Risk of explosion! Do not use solvents.
910
Maintenance
Detergent solution pump
Turn the programme selector to  Från (Off) and disconnect 
the mains plug.
1. Using a screwdriver or the insert for liquid detergent  
(depending on model), open and remove the service f lap.
2. Remove the folding gutter and place a large enough c ontainer underneath.
3. For models with a drainage hose:  Remove the drainage hose from the retainer and pul l it 
from the housing. 
Remove the sealing cap, allow the detergent solution  to flow out into the container. Replace 
the sealing cap and place the drainage hose in the re tainer.
3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the 
detergent solution begins to flow out on the folding  gutter. When the container is full, close 
the pump cover and empty the container. Repeat the a bove steps until all the detergent 
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be residua l water).
5. Clean the interior, pump cover thread and pump housing  (the impeller in the detergent 
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage hose (depending on model) and t he folding gutter to their start position.
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight int o the drain during the next wash: 
Pour 2 litres of water into compartment  II and then start the  Urpumpning (Empty)  programme.
Drainage hose at the siphon
Turn the programme selector to  Från (Off) and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage  hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with  the hose clamp.
Filter in the water supply
Risk of electric shock! 
Do not immerse the Aqua-Stop safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose: 
1. Turn off the tap.
2. Select any programme (except  Sköljning/Centrifugering (Rinse/Spin) // Urpumpning  
(Empty) ).
3. Choose $ (Start/ Reload). Let the programme run for approximately 40 sec onds.
4. Turn the programme selector to  Från (Off). Disconnect the mains plug. 
Clean the filter:
5. Disconnect the hose from the tap. 
Clean the filter using a small brush.  
and/or  for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance. 
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
–Risk of burning!
Allow the detergent solution to cool.
– Turn off the tap.
‘
‘$
a
‘a
 a
a
‘$ 
a
‘ a
a
‘
‘
S a
a
‘
‘
‘a
‘
‘1
‘a
a
‘a
‘
‘
a
                     
						

							a
7i j S
c
7i j S
c
7
i j S
c
7i j S
c
7i j S
c
7i j S
c
ÿ
7 7 7
i j S
c
7
i j S
c
i
ä
7]
 
 j
$
a
a
, §
³Å§›Éa
§
³µa a
a 1
§
›´
©³¯
a
( a
$
11
What to do if...
‘Water is leaking out – Attach/replace the drainage ho se correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not dispensed. –
$  (Start/Reload ) not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 10 .
– Supply hose kinked or trapped?
‘The appliance door will not  
open. – Safety function active. Programme stopped? 
apage 4 .
–   (without final spin) selected?  apage 3, 4 .
– Can be opened by emergency release only?  apage 9 .
– Door locked after the washing machine is switched o ff: Switch on the washing 
machine and wait for 5 seconds.
‘The selected programme does  
not start. –
$  (Start/Reload )or   (Ready in)  time selected?
– Washing machine door closed? 
– Childproof lock active? Deactivate  apage 5 .
‘Detergent solution is not  
drained. –
  (without final spin) selected?  apage 3, 4 .
– Clean the detergent solution pump  apage 10 .
– Clean the waste pipe and/or drainage hose.
‘No water can be seen in the  
drum. – Not a fault. Water remains inside below the visibl
e area.
‘Spin result not satisfactory. 
Laundry wet/too damp.– Not a fault. Spin control system has stopped the spin 
cycle. Uneven distribution of 
laundry.
Distribute large and small items of laundry evenly in  the drum.
– S (Reduced Ironing)  selected? apage 5 .
– Selected speed too low?  apage 5 .
‘Programme duration changes  
suddenly during operation. – Not a fault. The program time can vary according t
o the distribution of laundry, with 
it therefore being possible for the display panel to  show adjustments in the 
duration.
‘Spin cycle performed several  
times. – Not a fault. The balance control system has detected a
n imbalance and is 
attempting to redress this by repeating the spin.
‘Residual water in the  
compartment for care products. – Not a fault: the action of the care product is not
 affected.
– Clean the compartment if necessary  apage 9 .
‘Odour formation in the washing  
machine. – Run programme 
Bomull (Cottons)90 °C  without laundry. Use standard 
detergent.
‘Status display  1 flashing.
Appliance has detected a  
detergent overload. – Too much detergent used?
If foam is escaping from the detergent drawer: mix  1 tablespoon of fabric softener 
with ½ litre of water and pour into compartment  II(not with outdoor or down 
fabrics) .
– Reduce the detergent dosage for the next wash cycle.
‘Intense noise formation,  
vibrations and wandering  
during the spin cycle. – Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions .
– Transportation safety devices removed? Remove transportation safety devices aInstallation instructions .
‘Display panel/indicator lamps  
remain turned off while the  
machine is working. – Energy-saving mode 
apage 5 .
– Power cut?
– Fuses triggered? Reset/change the fuse. 
– If the fault occurs repeatedly, call customer service s.
‘Programme sequence longer  
than usual.– Not a fault. Unbalanced load detection system adjusts imb
alance by repeatedly 
distributing the laundry.
– Not a fault: foam detection system active; adds an addit ional rinse cycle.
‘Detergent residues on the  
laundry.– Occasionally, phosphate-free detergents contain water
-insoluble residues.
– Select  Sköljning/Centrifugering (Rinse/Spin)  or brush out the laundry after 
washing.
If you cannot correct a fault yourself or if a repa ir is necessary:
– Turn the programme selector to  Från (Off) and remove the mains plug from the socket.
– Turn off the water supply and call customer services aInstallation instructions.
Washing machine
en Instruction manual