Bosch WAS 24443 User Manual

							123456
:c- 90 °C°C AA Select Temperature ( : = cold)
1 - 24 Programme end after
 - 1200*	 Select the spin speed (* depending on the model) or  
(Rinse Hold = no Final spin, laundry remains in the water  after 
the final rinse).
Status indicators Programme sequence indicators:
þüü  	cc Wash, rinse, spin, programme duration or end
Rinse Hold reached
Childproof lock 
apage 5
Programme selectorDisplay panel/ 
options buttons Start/ReloadAdditional functions
Sorting and loading the laundry
Please note the manufacturers care information. According to the information on the care labels.
According to type, colour, soiling and temperature. Do not exceed the maximum load  apage 7 .
Observe important information  a page 9.
Insert large and small items of laundry.
Close the door. Ensure that items are not trapped betwe en the door and
rubber seal.
Adding detergent and care products
Measure according to:
Amount of laundry, soiling, water hardness (ask your wat er supply company)
and manufacturers instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser  and place in the drum.
Be careful when opening the detergent drawer while the m achine is in
operation.
Individual settings
‘Audible signal
‘
$  Start/Reload
To start the programme or to subsequently load addi tional laundry, and to activate/deactivate 
the childproof lock.
2. Set the volume  
for ...
1.
Activate the 
mode for 
setting the 
signal volume
Set to • 1 step, the 
display panel 
lights up Press and 
hold
+
1 step, 
release
Set to •
skip
Button signals
Information signals
Set the 
volume* 1 step Set the 
volume*
* you may need to 
select the function 
several times.
Insert for liquid detergent (depending on model), 
page 10.
Compartment II : detergent for main wash,
 water softener, bleach, stain remover
Your washing machine Intended use
ContentsPage
‹Intended use  .......................................
............................................... 1‹Programmes  ........................................ .............................................. 1‹Setting and adjusting the programme  ............... ........................... 3‹Washing  .......................................................................................... 3/4‹After washing  ..................................... ................................................ 4‹Individual settings  ................................ ......................................... 5/6‹Overview of programmes  ............................ .................................... 7‹Safety instructions  ............................................................................. 8‹Consumption values  ................................. ........................................ 8‹Important information  ......................................................................  9‹Insert for liquid detergent ............................. ................................. 10‹Care  ................................................................................................... 10‹Information on the display panel  ................... .............................. 10‹Instructions for blockages  ............................................................. 11‹What to do if ... ................................................................................. 12‹Emergency release .................................. ........................................ 13‹After-sales service ............................................................................ 13
Environmental protection/Conservation tips– Always fill the washing machine with a maximum amoun t of laundry for the relevant 
programme.
– Wash normally soiled laundry without a prewash. 
– Instead of  LFCottons 90 °C , select the LFCottons 60 °C  programme along 
with the additional  jEcoPerfect  function. Comparable cleaning with significantly 
lower energy consumption.
– Measure the detergent according to the manufacturers ins tructions and water 
hardness.
– If the laundry is then dried in the tumble dryer, sele ct the appropriate spin speed 
according to the instructions of the dryer manufacturer .
Preparation Before washing for the first timeWash once without any laundry 
a page 9.
Setting** and adjusting programmes1
2 Washing
Compartment
~: fabric softener, starch
Compartment I : detergent for Prewash
‹For domestic use only‹for machine-washable fabrics and hand-washable wool  
in detergent solution, 
‹To be operated with cold mains water and commercially  
available detergents and care products which are  
suitable for use in washing machines.
– Do not leave children unattended near the  washing machine
– The washing machine is not to be used by  children or persons not familiar with the operating 
instructions
– Keep pets away from the washing machine.
Dilute viscous fabric softener and fabric conditioner wit h 
water. This prevents blockages.
Detergent drawer  
with compartments I, II,  ~
Controlpanel
Washing machine  
doorhandle
Service flap
Washing machine door
Correct installation according to the  
separate installation instructions. 
Check the machine 
– Never use a damaged machine. 
– Inform the after-sales service. 
Connect the mains plug
– Make sure your hands are dry.  
– Take hold of the plug only.
Turn the tap on
**If the   symbol flashes on the  
display panel, the Childlock is active a  To deactivate, see page 5.
Additional functions and options buttons a  Individual settings,  page 5.
Washing
Programme has ended when ...
...$ Start/Reload is off and   appears in the display panel .
Cancel the programme
Programmes at high temperatures: 
– To cool the laundry down: Select Rinse .
– Select  $Start /Reload.
Programmes at lower temperatures:
– Select  	 Spin  or >Empty .
– Select  $Start /Reload.
Change the programme, if ...
... you have selected the wrong programme by mistake: 
– Reselect the programme. 
– Select   $Start /Reload.The new programme starts from scratch.
Reloading laundry, if ... a page 5
$  Start/ Reload  is selected, and then  YES lights up in the display panel 
and $  Start/Reload flashes. If  NO lights up, the door cannot be 
opened.
Do not leave the washing machine door open for a prol onged 
period, as water from the laundry could leak out.
Select $Start /Reload
Individual settings
‘Options buttons
The spin speed and temperature can be changed befor e and during the selected programme 
runs. Effects depend on the programme progress.
‘°C (Temperature)
The washing temperature displayed can be modified.  The maximum washing temperature 
that can be selected depends on the programme that  has been set.
‘ (Finished in)
When you select the programme, the relevant program me duration is displayed. You can 
delay the start of the programme before it begins.  The (Finished in) time can be set in 
increments of one hour up to a maximum of 24 hours.  Press the  button repeatedly until 
the desired number of hours is displayed (h = hours ). $ Start /Reload.
‘	 (Spin speed /c(Rinse Hold = no Final spin)
You can change the spin speed displayed or select  c(Rinse Hold = no Final spin, laundry 
remains in the water after the final rinse  display  panel). The maximum selectable spin 
speed depends on the model and on which programme i s currently selected. 
‘Additional functionsaand overview of programmes, page 7
i SpeedPerfect Washes in a shorter time but with a washing outcome  comparable to 
that of the standard programme. Maximum load  a Overview of 
programmes,  page 7.
j EcoPerfect For saving energy with a washing performance compar able to that of 
the standard programme.
Easy-iron  Special spin sequence with subsequent fluffing. Gen tle Final spin at 
reduced speed - residual moisture in the laundry sl ightly increased.
Rinse Plus   Extra rinse for areas with very soft water or for f urther enhancing the 
washing results.
‘Childproof lock and reloading
Childlock/ 
appliance lock You can lock the washing machine to prevent the fun
ctions you have 
set from being changed inadvertently. 
To activate/deactivate :After  the programme has started/finished, 
press and hold Start/Nachlegen Start/Reload for 5 s econds.
Note: the Childlock remains activated until the start  of the next 
programme, even after the machine has been switched  off.
Then deactivate the Childlock after the machine has  been switched 
back on.
YES 
Reload If you want to add subsequent items of laundry after
 the programme 
has started, press  $Start /Reload. The machine checks whether 
reloading is possible. 
If YES lights up and  $Start /Reload flashes, reloading is possible.
NO  flashing: wait until  YES lights up.
Note: do not open the door until  YES lights up.
NO : reloading not possible.
Note: for safety reasons, the washing machine door  remains locked 
when the water level and/or temperature is high, or  during a spin 
cycle.
To continue the programme, press  $Start /Reload.
Programme selector for  
switching the machine on and 
off and for selecting the 
programme. Can be turned in 
either direction.
All buttons are sensitive and  
need only to be touched lightly. 
If you press and hold the 
(Finished in)  option button, 
the appliance automatically 
runs through the settings 
options.
3
ProgrammesDetailed overview of programmes  apage 7 .
Temperature and spin speed can be selected individual ly, 
depending on the selected programme and programme  
progress.
Cottons LFHard-wearing fabrics
+ Prewash  7Hard-wearing fabrics, prewash at 30°C
Easy-care IEasy-care fabrics
+ Prewash 7Easy-care fabrics, 
prewash at 30 °C
MixMFDifferent types of laundry
Delicate/Silk “Delicate washable fabrics
:øWool /Hand/machine-washable wool
RinseExtra rinse with Spin
Spin	Extra spin with selectable spin speed
Empty >Drain the rinsing water when  c is activated 
(Rinse Hold = no Final spin)
Reduced Spin  
Extra spin with reduced spin speed
SuperQuick 15’  6SuperQuick programme
SensitiveHard-wearing fabrics, longer washing and  
additional rinsing for particularly sensitive skin
Sports, Fitness  $Fabrics made from microfibre
Jeans”Dark-coloured fabrics
Switch off the appliance
Turn the programme selector to  Off.
Turn the tap off
Not required for AquaStop models  aInstallation instructions, page 7 .
Remove the washing
Open the washing machine door and remove the washing.  
If    (Rinse Hold) = no Final spin is active: Turn the pr ogramme selector 
to > Empty  or 	cSpin . Select spin speed where necessary.
Press $Start /Reload.
– Remove any foreign objects - risk of rusting. 
– Leave the washing machine door and detergent drawer o pen 
so that any residual water can dry away.
Congratulations  - you have opted for a modern, high-quality 
domestic appliance manufactured by Bosch. This wash ing machine 
is distinguished by its economical water and energy  consumption.
Each machine that leaves our factory is inspected t horoughly to 
ensure that it functions properly and is in perfect  condition.
For further information about products, accessories , spare parts and 
services visit our web site: www.bosch-home.comor contact our 
after-sales service centres.
Press $Start/Reload
7
Overview of programmes  a  Check the consumption values table on page 8 and th e instructions on page 9.   * reduced load with additional  iSpeedPerfect  function.
‘
For a  short programme ,Mix 40°C  with max. spin speed is ideal.Programmes with no prewash - place detergent into compa rtment II, programmes with prewash - divide detergent between co mpartments I and  II.
Programmes °C max. Type of laundry 
Additional functions; options; notesCottonsLF
: - 90 °C
8 kg/
5 kg* Hard-wearing fabrics, heat-resistant fabrics  
made of cotton or linen
i
SpeedPerfect* ,j EcoPerfect ,  Easy-iron,  Rinse Plus ,
c (Rinse Hold) 
+ Prewash  7Sensitive
: - 60 °C Hard-wearing fabrics made of cotton or linen i
SpeedPerfect *, j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c (Rinse Hold); for particularly sensitive skin, longer  washing at the 
selected temperature, higher water level, extra rinse
Easy-care I
: - 60 °C
3.5 kgEasy-care fabrics made of cotton, linen,  
synthetic fibres or blended fabrics
i
SpeedPerfect ,j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c (Rinse Hold)
+ Prewash  7MixMF
: - 40 °C Fabrics made of cotton or easy-care fabrics i
SpeedPerfect ,j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c (Rinse Hold); different types of laundry can be washe d together
Jeans”
:c- 40 °C Dark-coloured fabrics made of cotton and dark  
easy-care fabrics i
SpeedPerfect ,j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c (Rinse Hold); reduced rinsing and Final spin
Delicate/Silk “
: - 40 °C
2 kgFor delicate, washable fabrics, e.g. made of silk,  
satin, synthetic fibres or blended fabrics (e.g. 
curtains)
i
SpeedPerfect ,j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c  (Rinse Hold); no spin cycles between the rinse cycle s
: Wool  O
: - 40 °C Hand or machine-washable fabrics made of wool  
or containing wool c
(Rinse Hold); particularly gentle wash programme that p revents the laun-
dry from shrinking, longer programme breaks (fabric s rest in the detergent 
solution)
SuperQuick 15’  6
: - 40 °C Easy-care fabrics made of cotton, linen,  
synthetic fibres or blended fabrics c
 (Rinse Hold); short programme, approx. 15 minutes,
suitable for lightly soiled laundry
Sports, Fitness  $
: - 40 °C Fabrics made from microfibre i
SpeedPerfect ,j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c (Rinse Hold)
Additional programmes
 Rinse,  	 Spin,  >Empty, 
cReduced Spin
1109 / 9000506578 *506578*
WAS24443IL
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
           
						

							8
     Safety instructions
– Read the Instruction manual and Installation instructions and all other information enclosed 
with the washing machine and act accordingly.
– Retain the documents for subsequent use. 
Risk of electric shock – Never pull the cable to disconnect the mains plug. 
– Only insert/pull out the mains plug with dry hands .
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the p lug.
– Destroy the lock on the washing machine door. This  will prevent 
children from locking themselves in and putting the ir lives in 
danger.
Danger of suffocation – Keep packaging, film and packaging parts out of th e reach of 
children.
Risk of poisoning – Keep detergents and care products out of the reach  of children.
Risk of explosion – Items of laundry pretreated with cleaning agents co ntaining 
solvents, e.g. stain remover/cleaning solvent may c ause an 
explosion after being loaded into the washing machi ne.
Rinse items of laundry thoroughly by hand before wa shing.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine. 
– Do not lean on the open washing machine door. 
– Do not reach into the drum if it is still rotating .
Consumption values
Programme Additional function Load Electricity 
consumption***Water***Programme 
duration***
LF
Cottons 30 °C** 8 kg 0,35 kWh 76 l 2:20 h
LFCottons 40 °C** 8 kg 0,97 kWh 76 l 2:30 h
LFCottons 60 °C** 8 kg 1,47 kWh 76 l 2:40 h
LFCottons 60 °C  jEcoPerfect *8 kg 1,03 kWh 56 l 3:25 h
LFCottons 90 °C 8 kg 2,34 kWh 87 l 2:30 h
MFMix 40 °C** 3.5 kg 0,47 kWh 49 l 1:01 h
IEasy-care 40 °C** 3.5 kg 0,55 kWh 55 l 1:43 h
“cDelicate/ Silk  :c (cold) 2 kg 0,04 kWh 35 l 0:41 h
“cDelicate/Silk 30 °C 2 kg 0,14 kWh 35 l 0:41 h
:øWool O:c  (cold) 2 kg 0,06 kWh 40 l 0:40 h
:Wool üO 30 °C 2 kg 0,16 kWh 40 l 0:40 h
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC.
** Programme setting for testing with the currently valid ve rsion of EN60456.
Note for comparative testing: to test using the test programm es, wash using the specified load amount and maximum spin 
speed. 
Select the  MFMix 40 °C  programme and maximum spin speed as the  short programme for coloureds.
*** The values deviate from the indicated values dependin g on water pressure, hardness, and inlet temperature, ambient 
temperature, type, amount and soiling of the laundry, de tergent used, fluctuations in the power supply and selected 
additional functions.
89
 Important information
Before washing for the first time
Do not load any laundry into the machine. Turn on the t ap. Add the following to 
compartment II:
– approx. 1 litre water  
– detergent (dosage according to the manufacturers instr uctions for light soiling and the 
appropriate degree of water hardness)
Set the programme selector to  Easy-care 60 °C and select $Start /Reload. At the end of 
the programme, turn the programme selector to  Off.
Protecting the laundry and the machine
– Empty pockets. 
– Look out for metal items (paperclips, etc.). 
– Wash delicates in a laundry bag (tights, curtains, unde rwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Loading the laundry
Insert large and small items of laundry. 
Take care not to trap items of laundry between the w ashing machine door and the rubber 
seal.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light No prewash. The  iSpeedPerfect  function can also be selected if desired.
Pretreat any stains as necessary.
heavy Insert less laundry. Select Prewash with the progr amme.
SoakingLoad laundry of the same colour
Pour soaking agent/detergent into compartment  II in accordance with the manufacturers 
instructions. Turn the programme selector to  LFCottons 30 °C  and press. After approx. 10 
minutes, press  $ Start/ Reload  to pause the programme. Once the required soaking tim e 
has elapsed, press  $ Start/ Reload  again to continue the programme, or select a different  
programme.
StarchingLaundry must not be treated with fabric softener
Starching is possible in all wash programmes using li quid starch. Pour the starch into the ~
fabric softener compartment according to the manufac turers instructions (if necessary clean 
it first).
Dyeing/bleaching
Dye should only be used in normal household quantities.  Salt may damage stainless steel. 
Always follow the dye manufacturers instructions.  Do not bleach laundry in the washing 
machine.
10
  Insert for liquid detergent  model-dependent
Position the insert for dispensing liquid detergent: 
– Remove the detergent drawer completely apage 10 .
– Slide the insert forwards. 
Do not use the insert (slide upwards): 
– for gel detergents and washing powder,
– for programmes with  7 Prewash  or the (Finished in) option
Care
‘Machine housing, control panel
– Wipe with a soft, damp cloth. 
– Do not use any abrasive cloths, scourers or cleaning ag ents (stainless steel cleaners). 
– Remove detergent and cleaning agent residue immediately .
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residue s.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert, push the insert up from below wi th your 
finger.
3. Clean the detergent dispenser tray and insert with water  and a brush and 
dry it.
4. Attach the insert and engage (connect the cylinder to th e guide pin).
5. Push in the detergent drawer. 
Leave the detergent drawer open so that any residual w ater can 
evaporate.
‘Drum
Leave the washing machine door open so that the drum ca n dry out.
Rust stains - use chlorine-free cleaning agent, not steel  wool.
‘DescalingEnsure there is no laundry in the machine
This is not necessary if the detergent is dosed corr ectly. However, if it is necessary, follow the 
instructions of the descaler manufacturer. Suitable desca ling products can be purchased 
from our website or after-sales service ( a page 13 ).
Information on the display panel  depending on model
F: 16Close the door properly; laundry may be trapped.
F: 17 , 29Open the tap fully, supply hose kinked/trapped; clean the filter a page 11 ,
water pressure too low.
F: 18Detergent solution pump blocked; clean detergent solutio n pump
a  page 11.
Drainage hose/waste pipe blocked; clean the drain hos e on the siphon 
a  page 11 .
F: 23Water in the base tub, appliance leaking. Call the afte r-sales service.
F: 34Cannot lock washing machine door. Open the door and clo se it again so that 
you can hear it click; switch the appliance off and o n again; set the 
programme and make individual settings; start the progr amme.
Other displaysSwitch off the appliance, wait 5 seconds and switch on again. If the same 
display appears again, call the after-sales service  a  page 13.
–Risk of electric shock.  Disconnect the mains plug.
– Risk of explosion. No solvents
11
Information about blockages
Detergent solution pump
Turn the programme selector to  Off, disconnect the mains plug.
1. Open and remove the service flap.
2. Remove the drainage hose from its holder. 
Remove the sealing cap and allow the solution to drain  out.
Put the sealing cap back in place.
3. Unscrew the pump cover carefully (residual water).
4. Clean the interior, pump cover thread and pump housing 
(the impeller in the detergent solution pump must be able  to rotate).
5. Put the pump cover back in place and screw it tight. T he handle 
should stand vertically. Insert the drainage hose into i ts holder.
6. Refit the service flap and close it. 
To prevent detergent from flowing down the drain unused dur ing the next wash cycle: 
pour 1 litre of water into compartment  II and start the  >Empty  programme.
Drainage hose at the siphon
Turn the programme selector to  Off, disconnect the mains plug.
1. Loosen the hose clamp, remove the drainage hose caref ully 
(residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection wit h the hose 
clamp.
Filter in the water supply
Risk of electric shock  
Do not immerse the AquaStop safety device in water (it  contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (apart from ( 	cSpin /> Empty ).
3. Press $Start /Reload. Allow the programme to run for approx. 40 
seconds.
4. Turn the programme selector to  Off. Remove the mains plug from the 
socket.
To clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush. 
and/or  for Standard and Aqua-Secure models:
Remove the hose from the back of the appliance,  
Remove the filter using pliers and clean the filter.
6. Connect the hose and check for leaks.
Risk of scalding 
– Allow the detergent solution to cool down.
– Turn off the tap.
12
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not dispensed. –
$ Start /Reload not selected?
– Tap not turned on?
– Filter may be blocked. Clean the filter a page 11.
– Supply hose kinked or trapped?
‘Washing machine door  
cannot be opened. – Safety function active. Programme terminated? 
a page 4 .
–   (Rinse Hold) = without Final spin) selected? 
a  page 3,4.
– Can be opened by emergency release only? a page 13.
‘Programme does not  
start. –
$ Start /Reload or  (Finished in) time selected?
– Washing machine door closed? 
– Childlock active? Deactivate it  a page 5 .
‘Detergent solution does  
not drain. –
  (Rinse Hold) = without Final spin selected? 
–> page 3,4.
– Clean the detergent solution pump  a page 11.
– Clean the waste pipe and/or drainage hose.
‘Water not visible in the  
drum. – Not a fault - water below the visible area.
‘Unsatisfactory spin  
result.
Laundry wet/too damp.– Not a fault - the unbalanced-load detection system
 has cancelled 
the spin cycle because of uneven distribution of th e laundry.
Distribute small and large items of laundry evenly  inside the 
drum.
–  Easy-iron selected?a page 5.
– Selected speed too low? a page 5 .
‘Drum spins gently  
several times. – Not a fault - unbalanced-load detection system is 
adjusting the 
imbalance.
‘Residual water in the  0
compartment for care  
products. – Not a fault - the action of the care product is no
t affected.
– Clean the insert if necessary  a page 10 .
‘Odour formation in the  
washing machine. – Run the 
LF Cottons 90 °C  programme with no load inserted. 
Use standard detergent.
‘Status display ³þ  flashes.
Appliance has detected  
a detergent overload. – Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre wa ter and pour 
into compartment  II(not with outdoor or down fabrics).
– Reduce the detergent dosage for the next wash cycl e.
‘Loud spinning, vibrations  
and “walking” during the 
spin cycle.– Appliance feet fixed?
Secure the appliance feet a Installation instructions .
– Transport braces removed? Remove the transport braces a Installation instructions .
‘Display panel/indicator  
lamps do not function 
during operation. – Power cut? 
– Circuit breakers tripped? Reset/replace the circuit
 breakers.
– If the fault occurs repeatedly, call the after-sale s service.
‘Programme sequence  
longer than usual.– Not a fault - unbalanced-load detection system is 
adjusting the 
imbalance by repeatedly redistributing the laundry.
– Not a fault - foam detection system active - adds  an additional 
rinse cycle.
‘Detergent residues on  
the laundry. – Occasionally, phosphate-free detergents contain wa
ter-insoluble 
residues.
– Use the    Rinse  cycle or brush out the laundry after washing.
13
What to do if ...
‘in Reload mode,  $Start /Reload flashes 
very quickly and an 
audible signal sounds – Water level too high. Not possible to reload laund
ry. 
Close door immediately if open.
– To continue the programme, press  $Start /Reload.
If you cannot correct a fault yourself (switching on /off) or a repair is required:
– Turn the programme selector to  Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales  servicea page 13.
Emergency release  e.g. in the event of a power cut
The programme continues when the power supply is re stored. However, if the laundry has to 
be removed, the washing machine door can be opened  as follows:
Risk of scalding. 
The detergent solution and laundry may be hot. Allow  them to cool down.
Do not reach inside the drum if it is still turning. 
Do not open the door if you can see water through th e glass.
1. Turn the programme selector to  Off and disconnect the mains 
plug.
2. Drain the detergent solution  apage 11 .
3. Pull the emergency release downwards with a tool an d release.
Washing machine door can then be opened.
After-sales service
‘If you cannot rectify the fault yourself (Troublesho oting a page 12, 13 ), please contact our 
after-sales service. We will always find a suitable  solution and will avoid a visit from a service 
technician wherever possible.
‘You can find the contact details for your nearest a fter-sales service here or in the after-sales 
service directory (depending on model). 
IL 08 9777 222
‘Please give the after-sales service the product num ber (E no.) and the production number 
(FD) of the appliance.
Product number      Production number You will find this information: 
on the inside of the washing machine door*/
opened service flap* and rear of the appliance. 
*depending on the model
‘Rely on the professionalism of the manufacturer.
 Please contact us. 
This will ensure that the repair is carried out by  trained service technicians who arrive 
equipped with genuine spare parts for your applianc e.
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and the separate installation instructions before 
operating the washing machine.
                          
						

							12
:c- 90 °C°C AA Select Temperature ( : = cold)
1 - 24 Programme end after
 - 1200*	 Select the spin speed (* depending on the model) or  
(Rinse Hold = no Final spin, laundry remains in the  water
the final rinse).
Status indicators Programme sequence indicators:
þüü  	cc Wash, rinse, spin, programme duration or end
Rinse Hold reached
Childproof lock 
apage 5
Programme selectorDisplay panel/ 
options buttonsAdditional functions
a
a
Amount of laundry, soiling, water hardness (ask your  wat
Pour liquid detergent into the appropriate dispense r 
‘ ‘$
Insert for liquid detergent (depending on model), 
page 10.
Compartment II : detergent for main wash,
 water softener, bleach, stain remover
Your washing machine Intended use
ContentsPage
‹Intended use  .......................................
............................................... 1‹Programmes  ........................................ .............................................. 1‹Setting and adjusting the programme  ............... ........................... 3‹Washing  .......................................................................................... 3/4‹After washing  ..................................... ................................................ 4‹Individual settings  ................................ ......................................... 5/6‹Overview of programmes  ............................ .................................... 7‹Safety instructions  ............................................................................. 8‹Consumption values  ................................. ........................................ 8‹Important information  ......................................................................  9‹Insert for liquid detergent .............................................................. 10‹Care  ................................................................................................... 10‹Information on the display panel  ................... .............................. 10‹Instructions for blockages  ............................................................. 11‹What to do if ... ................................................................................. 12‹Emergency release .................................. ........................................ 13‹After-sales service ............................................................................ 13
Environmental protection/Conservation tips– Always fill the washing machine with a maximum amoun t of laundry for the relevant 
programme.
– Wash normally soiled laundry without a prewash. 
– Instead of  LFCottons 90 °C , select the LFCottons 60 °C  programme along 
with the additional  jEcoPerfect  function. Comparable cleaning with significantly 
lower energy consumption.
– Measure the detergent according to the manufacturers ins tructions and water 
hardness.
– If the laundry is then dried in the tumble dryer, sele ct the appropriate spin speed 
according to the instructions of the dryer manufacturer .
Preparationa
Compartment~: fabric softener, starch
Compartment I : detergent for Prewash
‹For domestic use only‹for machine-washable fabrics and hand-washable wool  
in detergent solution, 
‹To be operated with cold mains water and commercial ly 
available detergents and care products which are  
suitable for use in washing machines.
– Do not leave children unattended near the  washing machine
– The washing machine is not to be used by  children or persons not familiar with the operating 
instructions
– Keep pets away from the washing machine.
~
Correct installation according to the  
separate installation instructions. 
Check the machine 
– Never use a damaged machine. 
– Inform the after-sales service. 
Connect the mains plug
– Make sure your hands are dry.  
– Take hold of the plug only.
Turn the tap on
a a
$
 
$ 	 >
$
$
a
$ $
$
‘
‘ 
‘

$
‘ 	 c
c
‘a
i a
j 

‘
$ $
$
 
ProgrammesDetailed overview of programmes  apage 7 .
Temperature and spin speed can be selected individua lly, 
depending on the selected programme and programme  
progress.
Cottons LFHard-wearing fabrics
+ Prewash  7Hard-wearing fabrics, prewash at 30°C
Easy-care IEasy-care fabrics
+ Prewash 7Easy-care fabrics, 
prewash at 30 °C
MixMFDifferent types of laundry
Delicate/Silk “Delicate washable fabrics
:øWool /Hand/machine-washable wool
RinseExtra rinse with Spin
Spin	Extra spin with selectable spin speed
Empty >Drain the rinsing water when  c is activated 
(Rinse Hold = no Final spin)
Reduced Spin  
Extra spin with reduced spin speed
SuperQuick 15’  6SuperQuick programme
SensitiveHard-wearing fabrics, longer washing and  
additional rinsing for particularly sensitive skin
Sports, Fitness  $Fabrics made from microfibre
Jeans”Dark-coloured fabrics
a

> 	c
$
Congratulations  - you have opted for a modern, high-quality 
domestic appliance manufactured by Bosch. This wash ing machine 
is distinguished by its economical water and energy  consumption.
Each machine that leaves our factory is inspected t horoughly to 
ensure that it functions properly and is in perfect  condition.
For further information about products, accessories , spare parts and 
services visit our web site: www.bosch-home.comor contact our 
after-sales service centres.
$
a
i
‘
LF : i j

c
7
 : i j

c
I : i j

c
7
MF : i j

c
” :c i j

c
“ : i j

c
: O : c
6 : c
$ : i j

c
 	> 
c
           
						

							34
:cAA : = cold)

 	 Select the spin speed (* depending on the model) or  
(Rinse Hold = no Final spin, laundry remains in the  water after 
Status indicators Programme sequence indicators: þüü  	cc Wash, rinse, spin, programme duration or end
a
Programme selector Start/Reload
Sorting and loading the laundry
Please note the manufacturers care information.According to the information on the care labels.
According to type, colour, soiling and temperature. Do not exceed the maximum load  apage 7 .
Observe important information  a page 9.
Insert large and small items of laundry.
Close the door. Ensure that items are not trapped be tween the door and
rubber seal.
Adding detergent and care products
Measure according to:
Amount of laundry, soiling, water hardness (ask you r water supply company)
and manufacturers instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispense r and place in the drum.
Be careful when opening the detergent drawer while  the machine is in
operation.
‘ ‘$
‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹
LF LF
j
Before washing for the first timeWash once without any laundry  a page 9.
Setting** and adjusting programmes1
2 Washing
~
‹‹
‹
Dilute viscous fabric softener and fabric conditioner w
ith 
water. This prevents blockages.
Detergent drawer  
with compartments I, II,  ~
Controlpanel
Washing machine  
doorhandle
Service flap
Washing machine door
**If the   symbol flashes on the  
display panel, the Childlock is active a
 To deactivate, see page 5.
Additional functions and options buttons a  Individual settings,  page 5.
Washing
Programme has ended when ...
...$ Start/Reload is off and   appears in the display panel .
Cancel the programme
Programmes at high temperatures: 
– To cool the laundry down: Select Rinse .
– Select  $Start /Reload.
Programmes at lower temperatures:
– Select  	 Spin  or >Empty .
– Select  $Start /Reload.
Change the programme, if ...
... you have selected the wrong programme by mistake: 
– Reselect the programme. 
– Select   $Start /Reload.The new programme starts from scratch.
Reloading laundry, if ... a page 5
$  Start/ Reload  is selected, and then  YES lights up in the display panel 
and $  Start/Reload flashes. If  NO lights up, the door cannot be 
opened.
Do not leave the washing machine door open for a prol onged 
period, as water from the laundry could leak out.
Select $Start /Reload
‘
‘ 
‘

$
‘ 	 c
c
‘a
i a
j 

‘
$ $
$Programme selector for  
switching the machine on and 
off and for selecting the 
programme. Can be turned in 
either direction.
All buttons are sensitive and  
need only to be touched lightly. 
If you press and hold the 
(Finished in)  option button, 
the appliance automatically 
runs through the settings 
options.
3
a
LF 7I
7
MF “
: ø /

	 > c

 6

$
”
Switch off the appliance
Turn the programme selector to  Off.
Turn the tap off
Not required for AquaStop models  aInstallation instructions, page 7 .
Remove the washing
Open the washing machine door and remove the washing.  
If    (Rinse Hold) = no Final spin is active: Turn the pr ogramme selector 
to > Empty  or 	cSpin . Select spin speed where necessary.
Press $Start /Reload.
– Remove any foreign objects - risk of rusting. 
– Leave the washing machine door and detergent drawer o pen 
so that any residual water can dry away.
Press $Start/Reload
a
i
‘
LF : i j

c
7
 : i j

c
I : i j

c
7
MF : i j

c
” :c i j

c
“ : i j

c
: O : c
6 : c
$ : i j

c
 	> 
c
           
						

							56
:cAA :

 	 
þüü  	cc
a
a
a
Individual settings
‘Audible signal
‘
$  Start/Reload
To start the programme or to subsequently load addi tional laundry, and to activate/deactivate 
the childproof lock.
2. Set the volume  
for ...
1.
Activate the 
mode for 
setting the 
signal volume
Set to • 1 step, the 
display panel 
lights up Press and 
hold
+
1 step, 
release
Set to •
skip
Button signals
Information signals
Set the 
volume* 1 step Set the 
volume*
* you may need to 
select the function 
several times.
‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹
LF LF
j
a
~
‹‹
‹
~
a a
$

$ 	 >
$
$
a
$ $
$
Individual settings
‘Options buttons
The spin speed and temperature can be changed befor e and during the selected programme 
runs. Effects depend on the programme progress.
‘°C (Temperature)
The washing temperature displayed can be modified.  The maximum washing temperature 
that can be selected depends on the programme that  has been set.
‘ (Finished in)
When you select the programme, the relevant program me duration is displayed. You can 
delay the start of the programme before it begins.  The (Finished in) time can be set in 
increments of one hour up to a maximum of 24 hours.  Press the  button repeatedly until 
the desired number of hours is displayed (h = hours ). $ Start /Reload.
‘	 (Spin speed /c(Rinse Hold = no Final spin)
You can change the spin speed displayed or select  c(Rinse Hold = no Final spin, laundry 
remains in the water after the final rinse  display  panel). The maximum selectable spin 
speed depends on the model and on which programme i s currently selected. 
‘Additional functionsaand overview of programmes, page 7
i SpeedPerfect Washes in a shorter time but with a washing outcome  comparable to 
that of the standard programme. Maximum load  a Overview of 
programmes,  page 7.
j EcoPerfect For saving energy with a washing performance compar able to that of 
the standard programme.
Easy-iron  Special spin sequence with subsequent fluffing. Gen tle Final spin at 
reduced speed - residual moisture in the laundry sl ightly increased.
Rinse Plus   Extra rinse for areas with very soft water or for f urther enhancing the 
washing results.
‘Childproof lock and reloading
Childlock/ 
appliance lock You can lock the washing machine to prevent the fun
ctions you have 
set from being changed inadvertently. 
To activate/deactivate :After  the programme has started/finished, 
press and hold Start/Nachlegen Start/Reload for 5 s econds.
Note: the Childlock remains activated until the start  of the next 
programme, even after the machine has been switched  off.
Then deactivate the Childlock after the machine has  been switched 
back on.
YES 
Reload If you want to add subsequent items of laundry after
 the programme 
has started, press  $Start /Reload. The machine checks whether 
reloading is possible. 
If YES lights up and  $Start /Reload flashes, reloading is possible.
NO  flashing: wait until  YES lights up.
Note: do not open the door until  YES lights up.
NO : reloading not possible.
Note: for safety reasons, the washing machine door  remains locked 
when the water level and/or temperature is high, or  during a spin 
cycle.
To continue the programme, press  $Start /Reload.
 
a
LF 7I
7
MF “
: ø /

	 > c

 6

$
”
a
 > 	c
$
$
a
i
‘
LF : i j

c
7
 : i j

c
I : i j

c
7
MF : i j

c
” :c i j

c
“ : i j

c
: O : c
6 : c
$ : i j

c
 	> 
c
           
						

							:cAA :

 	 
þüü  	cc
a
a
a
‘ ‘ $
‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹
LF LF
j
a
~
‹‹
‹
~
a a
$

$ 	 >
$
$
a
$ $
$
‘
‘ 
‘

$
‘ 	 c
c
‘a
i a
j 

‘
$ $
$
 
a
LF 7I
7
MF “
: ø /

	 > c

 6

$
”
a
 > 	c
$
$
7
Overview of programmes  a  Check the consumption values table on page 8 and th e instructions on page 9.   * reduced load with additional  iSpeedPerfect  function.
‘
For a  short programme ,Mix 40°C  with max. spin speed is ideal.Programmes with no prewash - place detergent into compa rtment II, programmes with prewash - divide detergent between co mpartments I and  II.
Programmes °C max. Type of laundry 
Additional functions; options; notesCottonsLF
: - 90 °C
8 kg/
5 kg* Hard-wearing fabrics, heat-resistant fabrics  
made of cotton or linen
i
SpeedPerfect* ,j EcoPerfect ,  Easy-iron,  Rinse Plus ,
c (Rinse Hold) 
+ Prewash  7Sensitive
: - 60 °C Hard-wearing fabrics made of cotton or linen i
SpeedPerfect *, j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c (Rinse Hold); for particularly sensitive skin, longer  washing at the 
selected temperature, higher water level, extra rinse
Easy-care I
: - 60 °C
3.5 kgEasy-care fabrics made of cotton, linen,  
synthetic fibres or blended fabrics
i
SpeedPerfect ,j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c (Rinse Hold)
+ Prewash  7MixMF
: - 40 °C Fabrics made of cotton or easy-care fabrics i
SpeedPerfect ,j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c (Rinse Hold); different types of laundry can be washe d together
Jeans”
:c- 40 °C Dark-coloured fabrics made of cotton and dark  
easy-care fabrics i
SpeedPerfect ,j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c (Rinse Hold); reduced rinsing and Final spin
Delicate/Silk “
: - 40 °C
2 kgFor delicate, washable fabrics, e.g. made of silk,  
satin, synthetic fibres or blended fabrics (e.g. 
curtains)
i
SpeedPerfect ,j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c  (Rinse Hold); no spin cycles between the rinse cycle s
: Wool  O
: - 40 °C Hand or machine-washable fabrics made of wool  
or containing wool c
(Rinse Hold); particularly gentle wash programme that p revents the laun-
dry from shrinking, longer programme breaks (fabric s rest in the detergent 
solution)
SuperQuick 15’  6
: - 40 °C Easy-care fabrics made of cotton, linen,  
synthetic fibres or blended fabrics c
 (Rinse Hold); short programme, approx. 15 minutes,
suitable for lightly soiled laundry
Sports, Fitness  $
: - 40 °C Fabrics made from microfibre i
SpeedPerfect ,j EcoPerfect ,  Easy-iron,   Rinse Plus ,
c (Rinse Hold)
Additional programmes
 Rinse,  	 Spin,  >Empty, 
cReduced Spin
1109 / 9000506578 *506578*
WAS24443IL
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
           
						

							8
     Safety instructions
– Read the Instruction manual and Installation instructions and all other information enclosed 
with the washing machine and act accordingly.
– Retain the documents for subsequent use. 
Risk of electric shock – Never pull the cable to disconnect the mains plug. 
– Only insert/pull out the mains plug with dry hands .
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the p lug.
– Destroy the lock on the washing machine door. This  will prevent 
children from locking themselves in and putting the ir lives in 
danger.
Danger of suffocation – Keep packaging, film and packaging parts out of th e reach of 
children.
Risk of poisoning – Keep detergents and care products out of the reach  of children.
Risk of explosion – Items of laundry pretreated with cleaning agents co ntaining 
solvents, e.g. stain remover/cleaning solvent may c ause an 
explosion after being loaded into the washing machi ne.
Rinse items of laundry thoroughly by hand before wa shing.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine. 
– Do not lean on the open washing machine door. 
– Do not reach into the drum if it is still rotating .
Consumption values
Programme Additional function Load Electricity 
consumption***Water***Programme 
duration***
LF
Cottons 30 °C** 8 kg 0,35 kWh 76 l 2:20 h
LFCottons 40 °C** 8 kg 0,97 kWh 76 l 2:30 h
LFCottons 60 °C** 8 kg 1,47 kWh 76 l 2:40 h
LFCottons 60 °C  jEcoPerfect *8 kg 1,03 kWh 56 l 3:25 h
LFCottons 90 °C 8 kg 2,34 kWh 87 l 2:30 h
MFMix 40 °C** 3.5 kg 0,47 kWh 49 l 1:01 h
IEasy-care 40 °C** 3.5 kg 0,55 kWh 55 l 1:43 h
“cDelicate/ Silk  :c (cold) 2 kg 0,04 kWh 35 l 0:41 h
“cDelicate/Silk 30 °C 2 kg 0,14 kWh 35 l 0:41 h
:øWool O:c  (cold) 2 kg 0,06 kWh 40 l 0:40 h
:Wool üO 30 °C 2 kg 0,16 kWh 40 l 0:40 h
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC.
** Programme setting for testing with the currently valid ve rsion of EN60456.
Note for comparative testing: to test using the test programm es, wash using the specified load amount and maximum spin 
speed. 
Select the  MFMix 40 °C  programme and maximum spin speed as the  short programme for coloureds.
*** The values deviate from the indicated values dependin g on water pressure, hardness, and inlet temperature, ambient 
temperature, type, amount and soiling of the laundry, de tergent used, fluctuations in the power supply and selected 
additional functions.
89
 Important information
Before washing for the first time
Do not load any laundry into the machine. Turn on t he tap. Add the following to 
compartment II:
– approx. 1 litre water  
– detergent (dosage according to the manufacturers  instructions for light soiling and the 
appropriate degree of water hardness)
Set the programme selector to  Easy-care 60 °C and select $Start /Reload. At the end of 
the programme, turn the programme selector to  Off.
Protecting the laundry and the machine
– Empty pockets. 
– Look out for metal items (paperclips, etc.). 
– Wash delicates in a laundry bag (tights, curtains, u nderwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag .
Loading the laundry
Insert large and small items of laundry. 
Take care not to trap items of laundry between the w ashing machine door and the rubber 
seal.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light No prewash. The  iSpeedPerfect  function can also be selected if desired.
Pretreat any stains as necessary.
heavy Insert less laundry. Select Prewash with the progr amme.
SoakingLoad laundry of the same colour
Pour soaking agent/detergent into compartment  II in accordance with the manufacturers 
instructions. Turn the programme selector to  LFCottons 30 °C  and press. After approx. 10 
minutes, press  $ Start/ Reload  to pause the programme. Once the required soaking ti me 
has elapsed, press  $ Start/ Reload  again to continue the programme, or select a differe nt 
programme.
StarchingLaundry must not be treated with fabric softener
Starching is possible in all wash programmes using  liquid starch. Pour the starch into the ~
fabric softener compartment according to the manufac turers instructions (if necessary clean 
it first).
Dyeing/bleaching
Dye should only be used in normal household quantitie s. Salt may damage stainless steel. 
Always follow the dye manufacturers instructions.  Do not bleach laundry in the washing 
machine.
a
7 
‘
‘
‘
a
a
a a
a
>
	c>
$
‘
‘$
a
‘a
 a a
‘$
a
‘ a
‘
‘
a
a
‘
‘0 a
‘LF
‘³þ
‘a
a
‘
‘
‘

‘$ $
a
a
‘a
‘
‘
‘
                          
						

							LF LFLF
LF jLFMFI
“c :c“c:ø O:c
: üO
MF
$
i
LF
$ $
~
10
  Insert for liquid detergent model-dependent
Position the insert for dispensing liquid detergent :
– Remove the detergent drawer completely  apage 10 .
– Slide the insert forwards. 
Do not use the insert (slide upwards): 
– for gel detergents and washing powder,
– for programmes with  7 Prewash  or the (Finished in) option
Care
‘Machine housing, control panel
– Wipe with a soft, damp cloth. 
– Do not use any abrasive cloths, scourers or cleani ng agents (stainless steel cleaners). 
– Remove detergent and cleaning agent residue immedi ately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener res idues.
1. Pull out, press insert down, remove drawer complete ly.
2. To remove the insert, push the insert up from below  with your 
finger.
3. Clean the detergent dispenser tray and insert with w ater and a brush and 
dry it.
4. Attach the insert and engage (connect the cylinder  to the guide pin).
5. Push in the detergent drawer. 
Leave the detergent drawer open so that any residua l water can 
evaporate.
‘Drum
Leave the washing machine door open so that the dru m can dry out.
Rust stains - use chlorine-free cleaning agent, not  steel wool.
‘DescalingEnsure there is no laundry in the machine
This is not necessary if the detergent is dosed cor rectly. However, if it is necessary, follow the 
instructions of the descaler manufacturer. Suitable  descaling products can be purchased 
from our website or after-sales service ( a page 13 ).
Information on the display panel  depending on model
F: 16Close the door properly; laundry may be trapped.
F: 17 , 29Open the tap fully, supply hose kinked/trapped; clean the filter a page 11 ,
water pressure too low.
F: 18Detergent solution pump blocked; clean detergent so lution pump
a  page 11.
Drainage hose/waste pipe blocked; clean the drain h ose on the siphon 
a  page 11 .
F: 23Water in the base tub, appliance leaking. Call the a fter-sales service.
F: 34Cannot lock washing machine door. Open the door and  close it again so that 
you can hear it click; switch the appliance off a nd on again; set the 
programme and make individual settings; start the p rogramme.
Other displaysSwitch off the appliance, wait 5 seconds and switch on again. If the same 
display appears again, call the after-sales service  a  page 13.
–Risk of electric shock.  Disconnect the mains plug.
– Risk of explosion. No solvents
11
Information about blockages
Detergent solution pump
Turn the programme selector to  Off, disconnect the mains plug.
1. Open and remove the service flap.
2. Remove the drainage hose from its holder. 
Remove the sealing cap and allow the solution to drai n out.
Put the sealing cap back in place.
3. Unscrew the pump cover carefully (residual water).
4. Clean the interior, pump cover thread and pump housing 
(the impeller in the detergent solution pump must be a ble to rotate).
5. Put the pump cover back in place and screw it tight . The handle 
should stand vertically. Insert the drainage hose into  its holder.
6. Refit the service flap and close it. 
To prevent detergent from flowing down the drain unuse d during the next wash cycle: 
pour 1 litre of water into compartment  II and start the  >Empty  programme.
Drainage hose at the siphon
Turn the programme selector to  Off, disconnect the mains plug.
1. Loosen the hose clamp, remove the drainage hose care fully 
(residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection w ith the hose 
clamp.
Filter in the water supply
Risk of electric shock  
Do not immerse the AquaStop safety device in water (it  contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (apart from ( 	cSpin /> Empty ).
3. Press $Start /Reload. Allow the programme to run for approx. 40 
seconds.
4. Turn the programme selector to  Off. Remove the mains plug from the 
socket.
To clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush. 
and/or  for Standard and Aqua-Secure models:
Remove the hose from the back of the appliance,  
Remove the filter using pliers and clean the filter.
6. Connect the hose and check for leaks.
Risk of scalding 
– Allow the detergent solution to cool down.
– Turn off the tap.
‘
‘$
a
‘a
 a a
‘$
a
‘ a
‘
‘
a
a
‘
‘0 a
‘LF
‘³þ
‘a
a
‘
‘
‘

‘$ $
a
a
‘a
‘
‘
‘
                          
						

							LF LFLF
LF jLFMFI
“c :c“c:ø O:c
: üO
MF
$
i
LF
$ $
~
a
7 
‘
‘
‘
a
a
a a
a
 Disconnect the mains plug.
>
	c>
$
12
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not dispensed. –
$ Start /Reload not selected?
– Tap not turned on?
– Filter may be blocked. Clean the filter a page 11.
– Supply hose kinked or trapped?
‘Washing machine door  
cannot be opened. – Safety function active. Programme terminated? 
a page 4 .
–   (Rinse Hold) = without Final spin) selected? 
a  page 3,4.
– Can be opened by emergency release only? a page 13.
‘Programme does not  
start. –
$ Start /Reload or  (Finished in) time selected?
– Washing machine door closed? 
– Childlock active? Deactivate it  a page 5 .
‘Detergent solution does  
not drain. –
  (Rinse Hold) = without Final spin selected? 
–> page 3,4.
– Clean the detergent solution pump  a page 11.
– Clean the waste pipe and/or drainage hose.
‘Water not visible in the  
drum. – Not a fault - water below the visible area.
‘Unsatisfactory spin  
result.
Laundry wet/too damp.– Not a fault - the unbalanced-load detection system
 has cancelled 
the spin cycle because of uneven distribution of th e laundry.
Distribute small and large items of laundry evenly  inside the 
drum.
–  Easy-iron selected?a page 5.
– Selected speed too low? a page 5 .
‘Drum spins gently  
several times. – Not a fault - unbalanced-load detection system is 
adjusting the 
imbalance.
‘Residual water in the  0
compartment for care  
products. – Not a fault - the action of the care product is no
t affected.
– Clean the insert if necessary  a page 10 .
‘Odour formation in the  
washing machine. – Run the 
LF Cottons 90 °C  programme with no load inserted. 
Use standard detergent.
‘Status display ³þ  flashes.
Appliance has detected  
a detergent overload. – Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre wa ter and pour 
into compartment  II(not with outdoor or down fabrics).
– Reduce the detergent dosage for the next wash cycl e.
‘Loud spinning, vibrations  
and “walking” during the 
spin cycle.– Appliance feet fixed?
Secure the appliance feet a Installation instructions .
– Transport braces removed? Remove the transport braces a Installation instructions .
‘Display panel/indicator  
lamps do not function 
during operation. – Power cut? 
– Circuit breakers tripped? Reset/replace the circuit
 breakers.
– If the fault occurs repeatedly, call the after-sale s service.
‘Programme sequence  
longer than usual.– Not a fault - unbalanced-load detection system is 
adjusting the 
imbalance by repeatedly redistributing the laundry.
– Not a fault - foam detection system active - adds  an additional 
rinse cycle.
‘Detergent residues on  
the laundry. – Occasionally, phosphate-free detergents contain wa
ter-insoluble 
residues.
– Use the    Rinse  cycle or brush out the laundry after washing.
13
What to do if ...
‘in Reload mode,  $Start /Reload flashes 
very quickly and an 
audible signal sounds – Water level too high. Not possible to reload laund
ry. 
Close door immediately if open.
– To continue the programme, press  $Start /Reload.
If you cannot correct a fault yourself (switching on /off) or a repair is required:
– Turn the programme selector to  Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales  servicea page 13.
Emergency release  e.g. in the event of a power cut
The programme continues when the power supply is re stored. However, if the laundry has to 
be removed, the washing machine door can be opened  as follows:
Risk of scalding. 
The detergent solution and laundry may be hot. Allow  them to cool down.
Do not reach inside the drum if it is still turning. 
Do not open the door if you can see water through th e glass.
1. Turn the programme selector to  Off and disconnect the mains 
plug.
2. Drain the detergent solution  apage 11 .
3. Pull the emergency release downwards with a tool an d release.
Washing machine door can then be opened.
After-sales service
‘If you cannot rectify the fault yourself (Troublesho oting a page 12, 13 ), please contact our 
after-sales service. We will always find a suitable  solution and will avoid a visit from a service 
technician wherever possible.
‘You can find the contact details for your nearest a fter-sales service here or in the after-sales 
service directory (depending on model). 
IL 08 9777 222
‘Please give the after-sales service the product num ber (E no.) and the production number 
(FD) of the appliance.
Product number      Production number You will find this information: 
on the inside of the washing machine door*/
opened service flap* and rear of the appliance. 
*depending on the model
‘Rely on the professionalism of the manufacturer.
 Please contact us. 
This will ensure that the repair is carried out by  trained service technicians who arrive 
equipped with genuine spare parts for your applianc e.
                          
						

							LF LFLF
LF jLFMFI
“c :c“c:ø O:c
: üO
MF
$
i
LF
$ $
~
a
7 
‘
‘
‘
a
a
a a
a
 Disconnect the mains plug.
>
	c>
$
‘
‘$
a
‘a
 a a
‘$
a
‘ a
‘
‘
a
a
‘
‘0 a
‘LF
‘³þ
‘a
a
‘
‘
‘

‘$ $
a
a
‘a
‘
‘
‘
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and the separate installation instructions before 
operating the washing machine.