Home > Bosch > Washing Machine > Bosch WAS 32742 User Manual

Bosch WAS 32742 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Bosch WAS 32742 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 101 Bosch manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							123456
    Switching off
    Turn the programme selector to off.
    Turning the tap off
    Not required for Aqua-Stop models  aInstallation 
    instructions, page 7.
    Removing washing
    Open the washing machine door and remove the  
    washing. 
    If   Rinse stop  (no final spin) is active: turn the 
    programme selector to  >Drain  or 	cSpin . Select the 
    spin speed if necessary. 
    Press  $Start /Reload.
    – Remove any foreign objects -
    risk of rusting.
    – Leave the washing machine door and  detergent drawer open so that any residual  
    water can evaporate. 
    Programme has ended when...
    ...  finished, Remove washing  appears on the display 
    panel.
    Interrupting the programme
    Programmes at high temperatures: 
    – Cool washing: select  c
    Rinse .
    – Press  $Start/Reload .
    Programmes at low temperatures: 
    – Select  	cSpin  or >Drain .
    – Press  $Start/ Reload.
    Changing the programme, if ...
    ... you have selected the wrong programme by mistake :
    – Reselect the programme. 
    – Press  $Start /Reload. The new programme starts 
    from the beginning.
    Reloading laundry, if ... a page 6
    ...$  Start/ Reload  is selected and  Top-up possible
    appears in the display panel.
    – Do not leave the washing machine door open  for too long as water from the washing could  
    leak out.
    – Load indicator not active  when reloading.
    Press $Start /Reload.
    Sorting the laundry
    Follow the manufacturers care information.
    According to the information on the care labels.
    According to type, colour, soiling and temperature.
    Do not exceed the maximum load  apage 7 .
    Observe the important information  apage 9 .
    Detergents and care products
    Measure accordingly:
    Amount of laundry, soiling, water hardness (ask your  water supply
    company) and manufacturers instructions.
    Models without insert for liquid detergent:
    Pour liquid detergent into the appropriate dispense r and place in the drum.
    During operation: open the detergent drawer carefull y.
    ProgrammesDetailed overview of programmes apage 7 .
    Temperature and spin speed can be selected individu ally, 
    depending on the selected programme and programme  
    progress.
    Cottons LFHard-wearing fabrics
    Easy-care IEasy-care fabrics
    MixLIFDifferent types of laundry
    Delicate/Silk “Delicate washable fabrics
    :øWool /Hand/machine-washable wool
    Rinse Extra rinse with spin
    Spin 	Extra spin with selectable spin speed
    Drain  >Empty the rinsing water with  Rinse stop  (no final spin)
    SuperQuick 15’ 6Extra short programme
    Sensitive Hard-wearing fabrics; longer washing  
    and additional rinsing for particularly  
    sensitive skin
    Sports, Fitness $Fabrics made from microfibre
    Shirt/Blouse GNon-iron shirts
    Jeans/ Dark Wash Dark-coloured fabrics
    Memory Personalised programme –>  page 6
    Memory Personalised programme –>  page 6
    – –, 20° - 90°           °CÔÈ 
    Set the temperature (– – = cold)
    0, 400 - 1600*             	cÔÈ 
    Set the spin speed
     (* model-dependent) (0=no spin dur- ing the programme sequence)
    Programme selectorDisplay panel/
    menu buttons/change buttonsStart/
    Reload
    Individual settings       
    Stain selection
    The correct treatment for every stain
    Do not let stains dry. Remove any solid residue bef orehand. Sort items of laundry as usual 
    and load the washing machine. Select a type of stain  (cannot be combined).
    ‘A total of 16 different stains can be selected. The washing machine adjusts the washing 
    temperature, drum movement and soaking time to suit  the type of stain. Hot or cold water, 
    gentle or intensive washing control (thanks to the n ew drum structure) and a long or short 
    soaking time ensure that the wash programme has a s pecial sequence for each type of 
    stain.
    ‘A stain type can be added to each programme via the  menu buttons/change buttons.
    ‘The result: optimum stain treatment without the use of additional special detergents.
    ‘Stains
    Baby food 
    Blood 
    Egg 
    Soil and sand 
    Grass 
    CoffeeCosmetics
    Red wine stain 
    Chocolate 
    Sweat 
    Bottom sock dirt
    Butter and edible oil
    Tea
    Tomato 
    Strawberry 
    Orange
    ‘Stain treatment in detail - 2 examples
    Egg Soaked in lukewarm water, selected wash cycle wit
    h a higher 
    water level and additional rinse cycles to remove p articles
    Blood Blood is first loosened in cold water, then  the selected wash 
    programme starts.
    For the other types of stain, we have formulated co mparable solutions in our intensive 
    studies.
    Reload 
    If you want to add additional items of laundry afte r the programme has started, choose 
    $  Start/ Reload . The machine checks whether reloading is possible.  Follow the instructions 
    in the display panel. 
    For safety reasons, the washing machine door remains  locked when the water level and/or 
    temperature is high, or while the drum is rotating. 
    To continue the programme, press the  $Start /Reload button.
    ‘Personalised programme
    You can store a programme and all its settings perm anently under Memory  and 
    Memory :
    – Turn the programme selector to  Memory  or Memory .
    – Select the desired programme using the $
    /#buttons.
    – Select the desired option with the  %/& buttons and, if necessary, change the setting with 
    the $
    /# buttons.
    – Make your desired settings with the  °C Ô
    È (temperature) and  	ÔÈ (spin) buttons.
    – Press the  Start/Reload button.
    Insert for liquid detergent (depending on model),  apage 10
    Compartment II : detergent for main wash,
     softener, bleach, stain remover
    Your washing machine
    Congratulations  ä you have opted for a modern, high-quality 
    domestic appliance manufactured by Bosch. This washi ng machine 
    is distinguished by its economical water and energy  consumption.
    Each machine that leaves our factory is inspected thor oughly to 
    ensure that it functions properly and is in perfect  condition.
    For further information about products, accessories , spare parts and 
    services visit our web site:  www.bosch-home.comor contact our 
    after-sales service centres.
    Intended use
    ContentsPage
    ‹Intended use  ...................................... ................................................ 1
    ‹Programmes ........................................ ............................................... 1
    ‹Setting and adjusting the programme  ............... ........................... 3‹Washing  .......................................................................................... 3/4
    ‹After washing  ..................................... ................................................ 4
    ‹Individual settings ............................... ........................................... 5/6‹Overview of programmes  ............................ .................................... 7
    ‹Safety instructions  ............................................................................. 8
    ‹Consumption values  ................................ ......................................... 8‹Important information  ......................................................................  9
    ‹Insert for liquid detergent ........................ ......................................  10
    ‹Care  ...................................................................................................10‹Information on the display panel  .................. ................................ 10
    ‹Information about blockages ........................................................ 11
    ‹What to do if... ............................................................................ 12/13‹Emergency release  ................................. ........................................ 13
    ‹After-sales service  ........................................................................... 13
    Environmental protection/Conservation tips– Always fill the washing machine with a maximum amoun t of 
    laundry for the relevant programme.
    – Wash normally soiled laundry without a prewash. 
    – Instead of the  LFCottons 90 °C  programme, select the 
    LF Cottons 60 °C  and the jEcoPerfect  option. Comparable 
    cleaning result with significantly lower energy con sumption.
    – Measure the detergent according to the manufacture rs 
    instructions and water hardness.
    – If the laundry is then dried in the tumble dryer,  select the 
    appropriate spin speed according to the instruction s of the dryer 
    manufacturer .
    Automatic stain removal 
    Automatic treatment of 16 different types of stain 
    possible. No 
    pretreatment of stains required - the washing machin e automatically 
    adapts the washing process  apage 6 .
    Preparation Before washing for the first timeWash once without any laundry a page 9.
    Open the door/set the programme1
    2 WashingCompartment 
    ~: fabric softener, starch
    Compartment I : Detergent for prewash
    ‹For domestic use only
    ‹For machine-washable fabrics and hand-washable wool  
    in detergent solution 
    ‹To be operated with cold drinking water and commer- 
    cially available detergents and care products which  are 
    suitable for use in washing machines
    – Observe the safety instructions on page 8. 
    – Do not leave children unattended near the washing  machine.
    – The washing machine is not to be used by children  or persons 
    not familiar with the operating instructions.
    – Keep pets away from the washing machine.
    Detergent drawer  
    with compartments I, II,  ~
    Control panel 
    Washing machine door  
    handle
    Service flap 
    Washing machine door 
    Correct installation according to the 
    separate Installation instructions.
    Check the machine 
    – Never use a damaged machine. 
    – Inform the after-sales service. 
    Connecting the mains  
    plug Make sure your hands are dry.  
    Take hold of the plug only.
    Turn the tap on
    **If the childlock is active  a deactivate it,  page 5.
    Follow the instructions in the display panel.
    Washing Individual settings
    ‘Options   see also the Overview of programmes
    VarioPerfect *
    i  SpeedPerfect  - Standard - 
    j EcoPerfect SpeedPerfect
    : For washing in a shorter time with a washing 
    outcome comparable to that of the standard programm e. 
    Maximum load  a Overview of programmes,  page 7.
    EcoPerfect : For saving energy with a washing performance 
    comparable to that of the standard programme.
    End time * When you select the programme, the respective time 
    to the 
    end of the programme is displayed. It can be adjust ed to a 
    maximum of 24 hours in 1-hour increments. Press the  
    $
    / #change  buttons repeatedly until the desired number of 
    hours is displayed (h=hour). It is not possible to  make 
    adjustments once the programme has started.
    7 Prewash
     OFF - ON For heavily soiled items. Prewash at max. 30 °C
    S Easy-iron
    OFF - ON Special spin sequence with subsequent fluffing. Gen
    tle final 
    spin at reduced speed. Residual moisture in the lau ndry is 
    increased slightly.
    3 Signal *
    Select the volume of the information signals.  
    OFF 
    ä quiet  ä medium  ä loud  ä very loud
    Button signal *
    Select the volume of the button signals.  
    OFF 
    ä quiet  ä medium  ä loud  ä very loud
    Language *
    Select the language of the display texts.
    =  Water Plus
    OFF - ON Increased water level. Gentler treatment of the lau
    ndry.
    c Rinse stop
    OFF - ON After the final rinse, the laundry remains in the w
    ater.
    2  Rinse Plus *
    max. +3 Rinse cycles Extra rinsing. Prolonged programme duration.  
    Recommended use: for particularly sensitive skin an
    d/or in 
    areas with very soft water.
    [  Stain selection *Automatic treatment of stubborn stains 
    apage 6 .
    ‘Display symbols
    # Childproof lock/appliance 
    lock 
    OFF - ON  You can lock the washing machine to prevent the function
    s 
    you have set from being changed inadvertently.
    To activate/deactivate:  press and hold the% menu  button for 
    5 seconds. 
    Note: the childproof lock remains activated until y ou start the 
    next programme, even after the machine has been swi tched 
    off. 
    Deactivate the childproof lock again when you have  switched 
    on the machine.
    3  Foam detection Too much foam in the washing machine.  Foam detection 
    system active - special programme sequence to reduc e foam.
    %/& To select menu options
    Information on        programme  
    sequence; with progress or  
    load bar, as appropriate$/ #To change settings
    available depending on the  
    selected
    * If the buttons are held for longer, 
    the appliance automatically scrolls 
    through the subsequent setting  
    options
    6
    Load indicator/rec- 
    ommended dosageTo activate, first open the door, set the programme  
    and then load the items of laundry.
    Loading the laundry
    Observe the load indicator in  
    the display  apage 9
    4Close the
    washing
    machine door
    Make individual settings 
    a page 5.
    Stain selection 
    a page 6. Select 
    the temperature/ 
    spin speed 
    a page 2.
    5
    Select  $Start/Reload
    All buttons are sensitive and  
    need only to be touched lightly. 
    Programme selector for  
    switching the machine on  
    and off and for selecting  
    the programme. Can be  
    turned in either direction.
    Dilute thick fabric softener and care products with  water.
    This prevents blockages.
    3Adding detergent and
    care products
    Observe the dosage  
    recommendation for detergent  
    in the display  apage 9
    Read these instructions and the separate  
    installation instructions before operating the  
    washing machine.
    7
    Overview of programmes 
    a
     table of consumption values on page 8 and instruct ions on page 9.
    * reduced load for additional iSpeed Perfect function.
    ‘
    Mix 40 °C  with maximum spin speed is ideal as a  short programme.Programmes without prewash - add detergent to compa rtment II
    , programmes with prewash - distribute the detergen t between compartments I and  II.
    Programmes °C max.
    Type of laundry  Options; notesCottons
    LF
    – – ...90 °C
    8 kg/ 
    5 kg*Hard-wearing fabrics, heat-resistant fabrics made of  
    cotton or linen
    SpeedPerfect
    *, EcoPerfect ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop
    Sensitive  
    – – ... 60 °C Hard-wearing fabrics made of cotton or linen SpeedPerfect
    *, EcoPerfect ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop;for particularly sensitive  skin, longer wash 
    cycle at selected temperature, higher water level,  additional rinse 
    cycle
    Easy-care I
    – – ... 60 °C
    3.5 kg Easy-care fabrics made of cotton, linen, synthetic  
    fibres or blended fabrics
    SpeedPerfect, EcoPerfect
    ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop
    Mix 
    – – ...  40 °C Fabrics made of cotton and easy-care fabrics SpeedPerfect, EcoPerfect
    ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop;  different types of laundry can be washed 
    together
    Jeans/Dark Wash 
    – – ... 40 °C Dark-coloured fabrics made of cotton and dark  
    easy-care fabrics SpeedPerfect
    ,EcoPerfect ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop;  reduced rinse + spin and final spin
    Shirts/BlousesG
    – – ... 60 °C
    2 kgNon-iron shirts made of cotton, linen, synthetic  
    fibres or blended fabrics
    SpeedPerfect
    , EcoPerfect ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop ; gentle spin only, hang up dripping wet 
    Delicates/Silk“
    – – ... 40 °C For delicate, washable fabrics, e.g. made of silk,  
    satin, synthetic fibres or blended fabrics (e.g.  
    curtains) SpeedPerfect, EcoPerfect
    ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop ; gentle spin between the rinse cycles only
    /øWool :
    – – ...  40 °C Hand or machine-washable fabrics made of wool or  
    containing wool Rinse stop
    ; particularly gentle wash programme to prevent shrinka ge of 
    laundry, longer breaks during the programme (fabrics  rest in the detergent 
    solution)
    SuperQuick 15’  6
    – – ... 40 °C Easy-care fabrics made of cotton, linen, synthetic  
    fibres or blended fabrics Rinse stop
    ; short programme, approx. 15 minutes,
    suitable for lightly soiled washing
    Sport, Fitness $
    – – ... 40 °C Fabrics made from microfibre SpeedPerfect, EcoPerfect, Water Plus, Rinse Plus, Stains, Rinse stop 
    Additional programmes cRinse,  	cSpin,  > Drain 
    0110 / 9000522914 
    *522914*
    WAS32742AU
    Robert Bosch Hausgeräte GmbH
    Carl-Wery-Str. 34
    81739 München / Deutschland
                    
    						
    							8
    Safety instructions 
    – Read the instruction manual and installation instructions and all other information enclosed 
    with the washing machine and act accordingly.
    – Retain the documents for subsequent use. 
    Risk of electric shock – Never pull the cable to disconnect the mains plug. 
    – Only insert/pull out the mains plug with dry hands .
    Danger to life For worn-out appliances: 
    – Disconnect the mains plug. 
    – Sever the mains cable and discard along with the pl ug.
    – Destroy the lock on the washing machine door. This  will prevent 
    children from locking themselves in and risking the ir lives.
    Danger of suffocation – Keep packaging, film and packaging parts out of th e reach of 
    children.
    Risk of poisoning – Keep detergents and care products out of the reach  of children.
    Risk of explosion – Items of laundry pretreated with cleaning agents co ntaining 
    solvents, e.g. stain remover/cleaning solvent may c ause an 
    explosion after being loaded into the washing machi ne.
    Rinse items of laundry thoroughly by hand beforehan d.
    Risk of injury – The washing machine door can become very hot.
    – Be careful when draining hot detergent solution. 
    – Do not climb onto the washing machine. 
    – Do not lean on the open washing machine door.
    – Do not reach into the drum if it is still rotating .
    Consumption values
    Programme Option Load Electricity 
    consumption***Water***Programme  duration***
    LF Cottons 30 °C** 8 kg 0,35 kWh 57 l 2:06 h
    LFCottons 40 °C** 8 kg 0,97 kWh 57 l 2:16 h
    LFCottons 60 °C** 8 kg 1,36 kWh 57 l 2:26 h
    LFCottons 60 °C jEcoPerfect  *8 kg 0,87 kWh 57 l 4:00 h
    LFCottons 90 °C 8 kg 2,34 kWh 68 l 2:16 h
    I Mix 40 °C** 3.5 kg 0,47 kWh 37 l 0:53 h
    I Easy-Care 40 °C** 3.5 kg 0,55 kWh 41 l 1:35 h
    “c Delicate/Silk (cold) 2 kg 0,04 kWh 35 l 0:41 h
    “cDelicate/Silk 30 °C 2 kg 0,14 kWh 35 l 0:41 h
    :øWool  / (cold) 2 kg 0,06 kWh 40 l 0:40 h
    : øWool  / 30 °C 2 kg 0,16 kWh 40 l 0:40 h
    * Programme setting for testing and energy labelling  in accordance with AS/NZS2040.1:2005.
    Cottons 60 EcoPerfect 1600 spin is the Recommended  program for 8kg Normal soiled load.
    ** Programme setting for testing according to the cu rrently valid version of IEC60456.
    Note for comparative testing: to test using the tes t programmes, wash using the specified load 
    amount and maximum spin speed.
    *** The values deviate from the indicated values dep ending on water pressure, hardness, and inlet 
    temperature, ambiente temperature, type, amount and  soiling of the laundry, 
    detergent used, fluctuations in the power supply and  selected additional functions.
    89
    Important information
    Before washing for the first time
    Do not load any laundry into the machine. Turn on the tap. Add the following to 
    compartment  II:
    – approx. 1 litre water  
    – detergent (dosage according to the manufacturers  instructions for light soiling and the 
    appropriate degree of water hardness)
    Set the programme selector to  Easy-care 60 °C and select Start/Reload. At the end of the 
    programme, turn the programme selector to  Off.
    Protecting the laundry and the machine
    – Empty pockets. 
    – Look out for metal items (paperclips, etc.). 
    – Wash delicates in a laundry bag (tights, curtains,  underwired bras).
    – Fasten zips, do up any buttons. 
    – Brush sand out of pockets and collars. 
    – Remove curtain fittings or place in the laundry ba g.
    Loading the laundry
    Insert large and small items of laundry. 
    Take care not to trap items of laundry between the washing machine door and the rubber 
    seal.
    Laundry with varying degrees of soiling
    Wash new items of clothing separately.
    light Do not prewash. If required, select the additi onal iSpeedPerfect  function.
    Pre-treat any stains as necessary.
    heavy Do not load as much laundry. Select the program w ith Prewash.
    SoakingLoad laundry of the same colour.
    Pour soaking agent/detergent into compartment  II in accordance with the manufacturers 
    instructions. Turn the programme selector to  LFCottons 30 °C  and press $Start/Reload .
    After approx. 10 minutes, press  $Start/ Reload  to pause the programme. Once the required 
    soaking time has elapsed, press  $Start /Reload again to continue the programme, or select 
    a different programme.
    Starching                 Laundry must not be treated with fabric softener
    Starching is possible in all wash programmes if liq uid starch is used. Pour starch into the ~
    fabric softener compartment in accordance with the  manufacturers instructions (rinse first if 
    necessary).
    Dyeing/bleaching
    Dye should only be used in normal household quantit ies. Salt may damage stainless steel. 
    Always follow the dye manufacturers instructions. D o not  use the washing machine for 
    bleaching clothes.
    Load indicator
    The load sensor detects how heavily the washing machi ne is loaded. The laundry is not 
    weighed.
    Recommended dosage
    Based on the selected programme and the detected lo ad, the recommended dosage function 
    provides a recommendation for the detergent dosage  in %. The % figure refers to the 
    recommendation of the detergent manufacturer.
    Automatic load sensing
    Independently of the load indicator, the automatic l oad sensing function uses additional 
    sensors to adapt the water and power consumption idea lly to each programme, depending 
    on the type of fabric and the load.
    10
    Insert for liquid detergent  model-dependent
    Position the insert for dispensing liquid detergent:
    – Remove the detergent drawer completely 
    apage 10 .
    – Slide the insert forwards. 
    Do not use the insert (slide upwards): 
    – for gel detergents and washing powder, 
    – for programmes with  7Prewash  or the end time  option.
    Care
    ‘Machine housing, control panel
    – Wipe with a soft, damp cloth. 
    – Do not use any abrasive cloths, scourers or cleani ng agents (stainless steel cleaners). 
    – Remove detergent and cleaning agent residue immedi ately.
    – Do not clean with a jet of water.
    Cleaning the detergent drawer ...
    ... if it contains detergent or fabric softener res idues.
    1. Pull out, press insert down, remove drawer completely .
    2. To remove the insert: press the insert upwards from  below with your finger.
    3. Clean the detergent dispenser tray and insert with water  and a brush and 
    dry it.
    4. Attach the insert and engage (connect the cylinder  to the guide pin).
    5. Push in the detergent drawer. 
    Leave the detergent drawer open so that any residual  water can 
    evaporate.
    ‘Drum
    Leave the washing machine door open so that the dru m can dry out.
    Rust stains - use chlorine-free cleaning agent, not  steel wool.
    ‘DescalingNo laundry in the machine.
    This is not necessary if the detergent is dosed corr ectly. However, if it is necessary, follow the 
    instructions of the descaler manufacturer. Suitable  descaling products can be purchased from 
    our website or after-sales service ( a page 13 ).
    Information on the display panel     depending on model
    Door open?Close the washing machine door properly; laundry may be caught.
    Tap closed?Open the tap completely, supply hose kinked or trapped; Clean the 
    filter  a page 11 , Water pressure too low.
    Pump blocked?Detergent solution pump blocked; Clean the detergen t solution pump 
    a  page 11.
    Drainage hose/waste pipe blocked; Clean the drainage  hose at the 
    siphon  a page 11 .
    Top-up not possible; 
    water level too high 
    or Temperature too highNot possible to add more laundry. To continue, pres s the Start/Reload 
    button.
    F: 23Water in the base tub, appliance leaking. Call the  after-sales service.
    F: 34Washing machine door cannot be locked. Open the was hing machine 
    door and close it with an audible click; switch th e appliance off and 
    on again; set the programme and make your settings;  start the 
    programme.
    Other displaysSwitch off the appliance, wait for 5 seconds and switc h it back on. If 
    the display appears again, call the after-sales ser vice a page 13 .
    –Risk of electric shock. Disconnect the mains plug.
    – Risk of explosion. No solvents.
    11
    Information about blockages
    Detergent solution pump
    Turn the programme selector to  Off and disconnect the mains plug.
    1. Open and remove the service flap.
    2. Take the drainage hose out of the retainer. 
    Remove the sealing cap, allow the detergent solution to  flow out.
    Push the sealing cap back on.
    3. Carefully unscrew the pump cover (residual water).
    4. Clean the interior, pump cover thread and pump hous ing (the impeller in the detergent solution 
    pump must rotate).
    5. Replace the pump cover and screw it on tightly. The  handle is vertical. Place the drainage hose 
    back into the retainer.
    6. Place the service flap back on and close.
    To prevent unused detergent from flowing straight int o the drain during the next wash: Pour 1 litre of water into 
    compartment  II and start the  >Drain  programme.
    Drainage hose at the siphon
    Turn the programme selector to  Off and disconnect the mains plug.
    1. Loosen the hose clamp, carefully remove the drainag e hose (residual water).
    2. Clean the drainage hose and siphon connecting piece .
    3. Reattach the drainage hose and secure the connection with  the hose clamp.
    Filter in the water supply
    Risk of electric shock 
    Do no immerse the Aqua-Stop safety device in water (it contains an electrical valve).
    Reduce the water pressure in the supply hose:
    1. Turn off the tap.
    2. Select any programme (except  	Spin/  >Drain ).
    3. Choose  $Start /Reload. Let the programme run for approximately 40 sec onds.
    4. Turn the programme selector to  Off. Disconnect the mains plug.
    5. Clean the filter: 
    Disconnect the hose from the tap. 
    Clean the filter with a small brush. 
    and/or  for Standard and Aqua-Secure models:
    Remove the hose from the rear of the appliance.  
    Remove the filter with pliers and clean.
    6. Connect the hose and check for leaks.
    –Risk of scalding. Allow the detergent 
    solution to cool down.
    – Turn off the tap.
    12
    What to do if ...
    ‘Water is leaking out. – Attach/replace the drainage h ose correctly.
    – Tighten the screw connection of the supply hose.
    ‘No water supply.  
    Detergent not dispensed. –
    $ Start /Reload not selected?
    – Tap not turned on? 
    – Filter blocked? Clean the filter a page 11.
    – Supply hose kinked or trapped?
    ‘Washing machine door  
    cannot be opened. – Safety function active. Programme termination? 
    a page 4 .
    –  Rinse stop  (no final spin) selected?  a page 3, 4.
    – Can be opened by emergency release only? a page 13.
    ‘Programme does not  
    start. –
    $ Start/ Reload or  end time selected?
    – Washing machine door closed? 
    – Childproof lock active? Deactivate  a page 5 .
    ‘Detergent solution is not  
    drained. –
     Rinse stop  (no final spin) selected?  a page 3, 4.
    – Clean the detergent solution pump  a page 11.
    – Clean the waste pipe and/or drainage hose.
    ‘Water not visible in the  
    drum. – Not a fault - water below the visible area.
    ‘Spin result not  
    satisfactory. 
    Laundry wet/too damp.– Not a fault - the unbalanced load detection system
     has cancelled 
    the spin cycle due to uneven distribution of the laundr y.
    Distribute large and small items of laundry evenly  in the drum.
    –  Easy-Iron   selected?  a page 5.
    – Speed selected too low?  a page 5 .
    ‘Spin cycle performed  
    several times. – Not a fault - unbalanced load detection system is 
    adjusting the 
    imbalance.
    ‘Residual water in the  ~  compartment for care 
    products. – Not a fault - the action of the care product is no
    t affected.
    – Clean the insert if necessary  a page 10 .
    ‘Odour formation in the  
    washing machine. – Run programme 
    LFCottons 90 °C  without laundry. Use 
    standard detergent.
    ‘The ³3 status 
    indicatorlights. 
    Appliance has detected  
    a detergent overload. – Too much detergent used?
    Mix 1 tablespoon of fabric softener with ½ litre of  water and pour 
    into compartment  II(not with outdoor or down fabrics).
    – Reduce the detergent dosage for the next wash cycl e.
    ‘Loud noise generated,  
    vibrations and  
    “wandering” during the  
    spin cycle.– Are the appliance feet fixed?
    Secure the appliance feet a Installation instructions .
    – Transportation safety devices removed? Remove the transportation safety devices a  Installation instructions .
    ‘Display panel/indicator  
    lamps do not function  
    during operation. – Power cut? 
    – Circuit breakers tripped or fuses blown? Reset the
     circuit 
    breakers or change the fuses.
    – If the fault occurs repeatedly, call the after-sal es service.
    ‘Programme sequence  
    longer than usual.– Not a fault - unbalanced load detection system adj
    usts 
    imbalance by repeatedly distributing the laundry.
    – Not a fault - foam detection system active - sever al rinse cycles 
    are added.
    13
    What to do if ... 
    ‘Detergent residues on  
    the laundry. – Occasionally, phosphate-free detergents contain wa
    ter-insoluble 
    residues.
    – Select   cRinse  or brush the laundry after washing.
    ‘In Reload mode, $ Start/Reload flashes 
    very quickly and a signal  
    sounds. – Water level too high. Not possible to add laundry.
     Close the 
    washing machine door immediately if necessary.
    – To continue, press the  $ Start/Reload button.
    If you cannot correct a fault yourself (switching on /off) or a repair is required:
    – Turn the programme selector to  Off and remove the mains plug from the socket.
    – Turn off the water supply and call the after-sales  servicea page13.
    Emergency release  e.g. in the event of a power cut
    The programme continues when the power supply is res tored. However, if the laundry has to 
    be removed, the washing machine door can be opened a s follows:
    Risk of scalding. 
    The detergent solution and laundry may be hot. If p ossible, leave it to 
    cool down. 
    Do not reach into the drum if it is still rotating. 
    Do not open the washing machine door if water can b e seen through the 
    glass.
    1. Turn the programme selector to  Off and disconnect the mains plug.
    2. Drain the detergent solution  a page 11.
    3. Pull the emergency release downwards with a tool and  release.
    Washing machine door can then be opened.
    After-sales service
    ‘If you cannot rectify the fault yourself (Troublesh ooting a page 12, 13 ), please contact our 
    after-sales service. We will always find a suitable s olution and will avoid a visit from a service 
    technician wherever possible.
    ‘You can find the contact details for your nearest a fter-sales service here or in the after-sales 
    service directory (depending on model). 
    You find the regional service contact of all countri es in the enclosed service booklet.
    ‘Please give the after-sales service the product num ber (E no.) and the production number 
    (FD) of the appliance.
    Product number        Production number This information can be found: 
    on the inside of the washing machine door*/ 
    opened service flap* and rear of the appliance. 
    *depending on the model
    ‘Rely on the professionalism of the manufacturer.
     Please contact us. 
    This will ensure that the repair is carried out by  trained service technicians who arrive 
    equipped with genuine spare parts for your applianc e.
    Washing machine
    en Instruction manual
                            
    						
    							12
    a
    >	c
    $
    c$
    	c >
    $
    $
    a
    $
    $
    a a
    Pour liquid detergent into the appropriate dispense
    ProgrammesDetailed overview of programmes  apage 7 .
    Temperature and spin speed can be selected individu ally, 
    depending on the selected programme and programme  
    progress.
    Cottons LFHard-wearing fabrics
    Easy-care IEasy-care fabrics
    MixLIFDifferent types of laundry
    Delicate/Silk “Delicate washable fabrics
    :øWool /Hand/machine-washable wool
    Rinse Extra rinse with spin
    Spin 	Extra spin with selectable spin speed
    Drain  >Empty the rinsing water with  Rinse stop  (no final spin)
    SuperQuick 15’ 6Extra short programme
    Sensitive Hard-wearing fabrics; longer washing  
    and additional rinsing for particularly  
    sensitive skin
    Sports, Fitness $Fabrics made from microfibre
    Shirt/Blouse GNon-iron shirts
    Jeans/ Dark Wash Dark-coloured fabrics
    Memory Personalised programme –>  page 6
    Memory Personalised programme –>  page 6
    – –, 20° - 90°           °CÔÈ 
    Set the temperature (– – = cold)
    0, 400 - 1600*             	cÔÈ 
    Set the spin speed
     (* model-dependent) (0=no spin dur- ing the programme sequence)
    Programme selectorDisplay panel/
    menu buttons/change buttons
    ‘
    ‘
    ‘
    ‘
    ‘
    $
    $
    ‘
    
     
    $
    #
    % &
    $
    #
    ÔÈ 	ÔÈ
    Insert for liquid detergent (depending on model),  apage 10
    Compartment II : detergent for main wash,
     softener, bleach, stain remover
    Your washing machine
    Congratulations  ä you have opted for a modern, high-quality 
    domestic appliance manufactured by Bosch. This washi ng machine 
    is distinguished by its economical water and energy  consumption.
    Each machine that leaves our factory is inspected t horoughly to 
    ensure that it functions properly and is in perfect  condition.
    For further information about products, accessories , spare parts and 
    services visit our web site:  www.bosch-home.comor contact our 
    after-sales service centres.
    Intended use
    ContentsPage
    ‹Intended use  ...................................... ................................................ 1
    ‹Programmes ........................................ ............................................... 1
    ‹Setting and adjusting the programme  ............... ........................... 3‹Washing  .......................................................................................... 3/4
    ‹After washing  ..................................... ................................................ 4
    ‹Individual settings ............................... ........................................... 5/6‹Overview of programmes  ............................ .................................... 7
    ‹Safety instructions  ............................................................................. 8
    ‹Consumption values  ................................ ......................................... 8‹Important information  ......................................................................  9
    ‹Insert for liquid detergent ........................ ......................................  10
    ‹Care  ...................................................................................................10‹Information on the display panel  .................. ................................ 10
    ‹Information about blockages ........................................................ 11
    ‹What to do if... ............................................................................ 12/13‹Emergency release  ................................. ........................................ 13
    ‹After-sales service  ........................................................................... 13
    Environmental protection/Conservation tips– Always fill the washing machine with a maximum amo unt of 
    laundry for the relevant programme.
    – Wash normally soiled laundry without a prewash. 
    – Instead of the  LFCottons 90 °C  programme, select the 
    LF Cottons 60 °C  and the jEcoPerfect  option. Comparable 
    cleaning result with significantly lower energy con sumption.
    – Measure the detergent according to the manufacture rs 
    instructions and water hardness.
    – If the laundry is then dried in the tumble dryer,  select the 
    appropriate spin speed according to the instruction s of the dryer 
    manufacturer
    .
    Automatic stain removal 
    Automatic treatment of 16 different types of stain po ssible. No 
    pretreatment of stains required - the washing machi ne automatically 
    adapts the washing process  apage 6 .
    Preparation Before washing for the first timeWash once without any laundry a page 9.
    Compartment 
    ~: fabric softener, starch
    Compartment I : Detergent for prewash
    ‹For domestic use only
    ‹For machine-washable fabrics and hand-washable wool  
    in detergent solution 
    ‹To be operated with cold drinking water and commer- 
    cially available detergents and care products which  are 
    suitable for use in washing machines
    – Observe the safety instructions on page 8. 
    – Do not leave children unattended near the washing m achine.
    – The washing machine is not to be used by children  or persons 
    not familiar with the operating instructions.
    – Keep pets away from the washing machine.
    ~
    Correct installation according to the  
    separate Installation instructions.
    Check the machine 
    – Never use a damaged machine. 
    – Inform the after-sales service. 
    Connecting the mains  
    plug Make sure your hands are dry.  
    Take hold of the plug only.
    Turn the tap on
    a
    ‘
    i j a
    $
    #
    7 
    S 
    3
    ä ä ä ä
    ä ä ä ä
    = 
    c 2 [ a
    ‘#
    %
    3
    % &$#
    a
    a a
    a
    $
    All buttons are sensitive and  
    need only to be touched lightly. 
    Programme selector for  
    switching the machine on  
    and off and for selecting  
    the programme. Can be  
    turned in either direction.
    a
    Read these instructions and the separate  
    installation instructions before operating the  
    washing machine.
    a
    i
    ‘
    LF
    I
    
    
    G
    “
    / ø :
    6
    $
    c 	c >
                    
    						
    							34
    Switching off
    Turn the programme selector to off.
    Turning the tap off
    Not required for Aqua-Stop models  aInstallation 
    instructions, page 7.
    Removing washing
    Open the washing machine door and remove the  
    washing. 
    If   Rinse stop  (no final spin) is active: turn the 
    programme selector to  >Drain  or 	cSpin . Select the 
    spin speed if necessary. 
    Press  $Start /Reload.
    – Remove any foreign objects -
    risk of rusting.
    – Leave the washing machine door and  detergent drawer open so that any residual  
    water can evaporate. 
    Programme has ended when...
    ...  finished, Remove washing  appears on the display 
    panel.
    Interrupting the programme
    Programmes at high temperatures: 
    – Cool washing: select 
    cRinse .
    – Press  $Start/Reload .
    Programmes at low temperatures: 
    – Select  	cSpin  or >Drain .
    – Press  $Start/ Reload.
    Changing the programme, if ...
    ... you have selected the wrong programme by mistak e:
    – Reselect the programme. 
    – Press  $Start /Reload. The new programme starts 
    from the beginning.
    Reloading laundry, if ... a page 6
    ...$  Start/ Reload  is selected and  Top-up possible
    appears in the display panel.
    – Do not leave the washing machine door open  for too long as water from the washing could  
    leak out.
    – Load indicator not active  when reloading.
    Press $Start /Reload.
    Sorting the laundry
    Follow the manufacturers care information.
    According to the information on the care labels.
    According to type, colour, soiling and temperature.
    Do not exceed the maximum load  apage 7 .
    Observe the important information  apage 9 .
    Detergents and care products
    Measure accordingly:
    Amount of laundry, soiling, water hardness (ask you r water supply
    company) and manufacturers instructions. Models without insert for liquid detergent:
    Pour liquid detergent into the appropriate dispense r and place in the drum.
    During operation: open the detergent drawer careful ly.
    a
    LF I
    LIF
    “
    : ø /
    
    	
    > 
    6
    
    $
    G
    
      Ô
    È
    
    	c Ô
    È 
    Programme selectorStart/
    Reload
    ‘
    ‘
    ‘
    ‘
    ‘
    $
    $
    ‘
    
     
    $
    #
    % &
    $
    #
    ÔÈ 	ÔÈ
    a
    ä
    ‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    LF
    LF j
    a
    Before washing for the first timea page 9.
    Open the door/set the programme1
    2 Washing~
    ‹
    ‹
    ‹
    Detergent drawer  
    with compartments I, II, 
    ~
    Control panel 
    Washing machine door  
    handle
    Service flap 
    Washing machine door 
    **If the childlock is active 
    a deactivate it,  page 5.
    Follow the instructions in the display panel.
    Washing
    ‘
    i j a
    $
    #
    7 
    S 
    3
    ä ä ä ä
    ä ä ä ä
    = 
    c 2 [ a
    ‘#
    %
    3
    % &$#
    6
    Load indicator/rec- 
    ommended dosageTo activate, first open the door, set the programme  
    and then load the items of laundry.
    Loading the laundry
    Observe the load indicator in  
    the display  apage 9
    4Close the
    washing
    machine door
    Make individual settings 
    a page 5.
    Stain selection 
    a page 6. Select 
    the temperature/ 
    spin speed 
    a page 2.
    5
    Select  $Start/Reload
    Programme selector for  
    switching the machine on  
    and off and for selecting  
    the programme. Can be  
    turned in either direction.
    Dilute thick fabric softener and care products with  water.
    This prevents blockages.
    3Adding detergent and
    care products
    Observe the dosage  
    recommendation for detergent  
    in the display 
    apage 9
    a
    i
    ‘
    LF
    I
    
    
    G
    “
    / ø :
    6
    $
    c 	c >
                    
    						
    							56
    a
    >	c
    $
    c$
    	c >
    $
    $
    a
    $
    $
    a a
    a
    LF I
    LIF
    “
    : ø /
    
    	
    > 
    6
    
    $
    G
    
      Ô
    È
    
    	c Ô
    È 
    Individual settings       
    Stain selection
    The correct treatment for every stain
    Do not let stains dry. Remove any solid residue bef orehand. Sort items of laundry as usual 
    and load the washing machine. Select a type of stai n (cannot be combined).
    ‘A total of 16 different stains can be selected. The washing machine adjusts the washing 
    temperature, drum movement and soaking time to suit  the type of stain. Hot or cold water, 
    gentle or intensive washing control (thanks to the  new drum structure) and a long or short 
    soaking time ensure that the wash programme has a s pecial sequence for each type of 
    stain.
    ‘A stain type can be added to each programme via the  menu buttons/change buttons.
    ‘The result: optimum stain treatment without the use of add itional special detergents.
    ‘Stains
    Baby food 
    Blood 
    Egg 
    Soil and sand 
    Grass 
    CoffeeCosmetics 
    Red wine stain
    Chocolate 
    Sweat 
    Bottom sock dirt 
    Butter and edible oil
    Tea
    Tomato 
    Strawberry 
    Orange
    ‘Stain treatment in detail - 2 examples
    Egg Soaked in lukewarm water, selected wash cycle wi
    th a higher 
    water level and additional rinse cycles to remove p articles
    Blood Blood is first loosened in cold water, then  the selected wash 
    programme starts.
    For the other types of stain, we have formulated co mparable solutions in our intensive 
    studies.
    Reload 
    If you want to add additional items of laundry afte r the programme has started, choose 
    $  Start/ Reload . The machine checks whether reloading is possible.  Follow the instructions 
    in the display panel. 
    For safety reasons, the washing machine door remain s locked when the water level and/or 
    temperature is high, or while the drum is rotating. 
    To continue the programme, press the  $Start /Reload button.
    ‘Personalised programme
    You can store a programme and all its settings perm anently under Memory  and 
    Memory :
    – Turn the programme selector to  Memory  or Memory .
    – Select the desired programme using the $
    /#buttons.
    – Select the desired option with the  %/& buttons and, if necessary, change the setting with 
    the $
    /# buttons.
    – Make your desired settings with the  °C Ô
    È (temperature) and  	ÔÈ (spin) buttons.
    – Press the  Start/Reload button.
    a
    ä
    ‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    LF
    LF j
    a
    a
    ~
    ‹
    ‹
    ‹
    ~
    a
    Individual settings
    ‘Options   see also the Overview of programmes
    VarioPerfect
    *
    i  SpeedPerfect  - Standard - 
    j EcoPerfect SpeedPerfect
    : For washing in a shorter time with a washing 
    outcome comparable to that of the standard programm e. 
    Maximum load  a Overview of programmes,  page 7.
    EcoPerfect : For saving energy with a washing performance 
    comparable to that of the standard programme.
    End time
    *When you select the programme, the respective time  to the 
    end of the programme is displayed. It can be adjust ed to a 
    maximum of 24 hours in 1-hour increments. Press the  
    $
    / #change  buttons repeatedly until the desired number of 
    hours is displayed (h=hour). It is not possible to  make 
    adjustments once the programme has started.
    7 Prewash
     OFF - ON For heavily soiled items. Prewash at max. 30 °C
    S Easy-iron
    OFF - ON Special spin sequence with subsequent fluffing. Gen
    tle final 
    spin at reduced speed. Residual moisture in the lau ndry is 
    increased slightly.
    3 Signal
    *Select the volume of the information signals.  
    OFF  ä quiet  ä medium  ä loud  ä very loud
    Button signal
    *Select the volume of the button signals.  
    OFF  ä quiet  ä medium  ä loud  ä very loud
    Language
    *Select the language of the display texts.
    =  Water Plus
    OFF - ON Increased water level. Gentler treatment of the lau
    ndry.
    c Rinse stop
    OFF - ON After the final rinse, the laundry remains in the w
    ater.
    2  Rinse Plus
    *
    max. +3 Rinse cycles Extra rinsing. Prolonged programme duration.  
    Recommended use: for particularly sensitive skin an
    d/or in 
    areas with very soft water.
    [  Stain selection
    *Automatic treatment of stubborn stains  apage 6 .
    ‘Display symbols
    # Childproof lock/appliance 
    lock 
    OFF - ON  You can lock the washing machine to prevent the fun
    ctions 
    you have set from being changed inadvertently.
    To activate/deactivate:  press and hold the% menu  button for 
    5 seconds. 
    Note: the childproof lock remains activated until y ou start the 
    next programme, even after the machine has been swi tched 
    off. 
    Deactivate the childproof lock again when you have  switched 
    on the machine.
    3  Foam detection Too much foam in the washing machine . Foam detection 
    system active - special programme sequence to reduc e foam.
    %/& To select menu options
    Information on        programme  
    sequence; with progress or  
    load bar, as appropriate$/ #To change settings
    available depending on the  
    selected
    *If the buttons are held for longer, 
    the appliance automatically scrolls 
    through the subsequent setting  
    options
    a
    a
    a
    a
    $
    a
    a
    i
    ‘
    LF
    I
    
    
    G
    “
    / ø :
    6
    $
    c 	c >
                    
    						
    							a
    >	c
    $
    c$
    	c >
    $
    $
    a
    $
    $
    a a
    a
    LF I
    LIF
    “
    : ø /
    
    	
    > 
    6
    
    $
    G
    
      Ô
    È
    
    	c Ô
    È 
    ‘
    ‘
    ‘
    ‘
    ‘
    $
    $
    ‘
    
     
    $
    #
    % &
    $
    #
    ÔÈ 	ÔÈ
    a
    ä
    ‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    ‹‹
    ‹
    LF
    LF j
    a
    a
    ~
    ‹
    ‹
    ‹
    ~
    a
    ‘
    i j a
    $
    #
    7 
    S 
    3
    ä ä ä ä
    ä ä ä ä
    = 
    c 2 [ a
    ‘#
    %
    3 % &
    $#
    a
    a
    a
    a
    $
    a
    7
    Overview of programmes 
    a
     table of consumption values on page 8 and instruct ions on page 9.
    * reduced load for additional iSpeed Perfect function.
    ‘
    Mix 40 °C  with maximum spin speed is ideal as a  short programme.Programmes without prewash - add detergent to compa rtment 
    II, programmes with prewash - distribute the detergent between compartments 
    I and 
    II.
    Programmes °C max.
    Type of laundry  Options; notesCottons
    LF
    – – ...90 °C
    8 kg/ 
    5 kg*Hard-wearing fabrics, heat-resistant fabrics made of  
    cotton or linen
    SpeedPerfect
    *, EcoPerfect ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop
    Sensitive  
    – – ... 60 °C Hard-wearing fabrics made of cotton or linen SpeedPerfect
    *, EcoPerfect ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop;for particularly sensitive  skin, longer wash 
    cycle at selected temperature, higher water level,  additional rinse 
    cycle
    Easy-care I
    – – ... 60 °C
    3.5 kg Easy-care fabrics made of cotton, linen, synthetic  
    fibres or blended fabrics
    SpeedPerfect, EcoPerfect
    ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop
    Mix 
    – – ...  40 °C Fabrics made of cotton and easy-care fabrics SpeedPerfect, EcoPerfect
    ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop;  different types of laundry can be washed 
    together
    Jeans/Dark Wash 
    – – ... 40 °C Dark-coloured fabrics made of cotton and dark  
    easy-care fabrics SpeedPerfect
    ,EcoPerfect ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop;  reduced rinse + spin and final spin
    Shirts/BlousesG
    – – ... 60 °C
    2 kgNon-iron shirts made of cotton, linen, synthetic  
    fibres or blended fabrics
    SpeedPerfect
    , EcoPerfect ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop ; gentle spin only, hang up dripping wet 
    Delicates/Silk“
    – – ... 40 °C For delicate, washable fabrics, e.g. made of silk,  
    satin, synthetic fibres or blended fabrics (e.g.  
    curtains) SpeedPerfect, EcoPerfect
    ,Prewash, Easy-Iron, Water Plus, Rinse 
    Plus, Stains, Rinse stop ; gentle spin between the rinse cycles only
    /øWool :
    – – ...  40 °C Hand or machine-washable fabrics made of wool or  
    containing wool Rinse stop
    ; particularly gentle wash programme to prevent shrinkage  of 
    laundry, longer breaks during the programme (fabrics r est in the detergent 
    solution)
    SuperQuick 15’  6
    – – ... 40 °C Easy-care fabrics made of cotton, linen, synthetic  
    fibres or blended fabrics Rinse stop
    ; short programme, approx. 15 minutes,
    suitable for lightly soiled washing
    Sport, Fitness $
    – – ... 40 °C Fabrics made from microfibre SpeedPerfect, EcoPerfect, Water Plus, Rinse Plus, Stains, Rinse stop 
    Additional programmes cRinse,  	cSpin,  > Drain 
    0110 / 9000522914*522914*
    WAS32742AU
    Robert Bosch Hausgeräte GmbH
    Carl-Wery-Str. 34
    81739 München / Deutschland
                    
    						
    							8
    Safety instructions 
    – Read the instruction manual and installation instructions and all other information enclosed 
    with the washing machine and act accordingly.
    – Retain the documents for subsequent use. 
    Risk of electric shock – Never pull the cable to disconnect the mains plug. 
    – Only insert/pull out the mains plug with dry hands .
    Danger to life For worn-out appliances: 
    – Disconnect the mains plug. 
    – Sever the mains cable and discard along with the p lug.
    – Destroy the lock on the washing machine door. This  will prevent 
    children from locking themselves in and risking the ir lives.
    Danger of suffocation – Keep packaging, film and packaging parts out of th e reach of 
    children.
    Risk of poisoning – Keep detergents and care products out of the reach  of children.
    Risk of explosion – Items of laundry pretreated with cleaning agents c ontaining 
    solvents, e.g. stain remover/cleaning solvent may c ause an 
    explosion after being loaded into the washing machi ne.
    Rinse items of laundry thoroughly by hand beforehan d.
    Risk of injury – The washing machine door can become very hot.
    – Be careful when draining hot detergent solution. 
    – Do not climb onto the washing machine. 
    – Do not lean on the open washing machine door.
    – Do not reach into the drum if it is still rotating .
    Consumption values
    Programme Option Load Electricity 
    consumption***Water***Programme  duration***
    LF Cottons 30 °C** 8 kg 0,35 kWh 57 l 2:06 h
    LFCottons 40 °C** 8 kg 0,97 kWh 57 l 2:16 h
    LFCottons 60 °C** 8 kg 1,36 kWh 57 l 2:26 h
    LFCottons 60 °C jEcoPerfect  *8 kg 0,87 kWh 57 l 4:00 h
    LFCottons 90 °C 8 kg 2,34 kWh 68 l 2:16 h
    I Mix 40 °C** 3.5 kg 0,47 kWh 37 l 0:53 h
    I Easy-Care 40 °C** 3.5 kg 0,55 kWh 41 l 1:35 h
    “c Delicate/Silk (cold) 2 kg 0,04 kWh 35 l 0:41 h
    “cDelicate/Silk 30 °C 2 kg 0,14 kWh 35 l 0:41 h
    :øWool  / (cold) 2 kg 0,06 kWh 40 l 0:40 h
    : øWool  / 30 °C 2 kg 0,16 kWh 40 l 0:40 h
    * Programme setting for testing and energy labelling  in accordance with AS/NZS2040.1:2005.
    Cottons 60 EcoPerfect 1600 spin is the Recommended  program for 8kg Normal soiled load.
    ** Programme setting for testing according to the cu rrently valid version of IEC60456.
    Note for comparative testing: to test using the tes t programmes, wash using the specified load 
    amount and maximum spin speed.
    *** The values deviate from the indicated values dep ending on water pressure, hardness, and inlet 
    temperature, ambiente temperature, type, amount and  soiling of the laundry, 
    detergent used, fluctuations in the power supply an d selected additional functions.
    89
    Important information
    Before washing for the first time
    Do not load any laundry into the machine. Turn on t he tap. Add the following to 
    compartment  II:
    – approx. 1 litre water  
    – detergent (dosage according to the manufacturers  instructions for light soiling and the 
    appropriate degree of water hardness)
    Set the programme selector to  Easy-care 60 °C and select Start/Reload. At the end of the 
    programme, turn the programme selector to  Off.
    Protecting the laundry and the machine
    – Empty pockets. 
    – Look out for metal items (paperclips, etc.). 
    – Wash delicates in a laundry bag (tights, curtains,  underwired bras).
    – Fasten zips, do up any buttons. 
    – Brush sand out of pockets and collars. 
    – Remove curtain fittings or place in the laundry ba g.
    Loading the laundry
    Insert large and small items of laundry. 
    Take care not to trap items of laundry between the wa shing machine door and the rubber 
    seal.
    Laundry with varying degrees of soiling
    Wash new items of clothing separately.
    light Do not prewash. If required, select the additi onal iSpeedPerfect  function.
    Pre-treat any stains as necessary.
    heavy Do not load as much laundry. Select the program with  Prewash.
    SoakingLoad laundry of the same colour.
    Pour soaking agent/detergent into compartment  II in accordance with the manufacturers 
    instructions. Turn the programme selector to  LFCottons 30 °C  and press $Start/Reload .
    After approx. 10 minutes, press  $Start/ Reload  to pause the programme. Once the required 
    soaking time has elapsed, press  $Start /Reload again to continue the programme, or select 
    a different programme.
    Starching                 Laundry must not be treated with fabric softener
    Starching is possible in all wash programmes if liq uid starch is used. Pour starch into the ~
    fabric softener compartment in accordance with the  manufacturers instructions (rinse first if 
    necessary).
    Dyeing/bleaching
    Dye should only be used in normal household quantit ies. Salt may damage stainless steel. 
    Always follow the dye manufacturers instructions.  Do not use the washing machine for 
    bleaching clothes.
    Load indicator
    The load sensor detects how heavily the washing mac hine is loaded. The laundry is not 
    weighed.
    Recommended dosage
    Based on the selected programme and the detected lo ad, the recommended dosage function 
    provides a recommendation for the detergent dosage  in %. The % figure refers to the 
    recommendation of the detergent manufacturer.
    Automatic load sensing
    Independently of the load indicator, the automatic  load sensing function uses additional 
    sensors to adapt the water and power consumption ideall y to each programme, depending 
    on the type of fabric and the load.
    a
    7
    ‘
    ‘
    ‘
    a
    a
    a
    a
    a
    >
    	>
    $
    ‘
    ‘$
    a
    ‘a
     a
    a
    ‘$
    a
    ‘ a
    a
    ‘
    ‘
     a
    a
    ‘
    ‘~ a
    ‘LF
    ‘³3
    ‘a
    a
    ‘
    ‘
    ‘
    c
    ‘$ $
    a
    a
    ‘a
    ‘
    ‘
    ‘
                            
    						
    							LF 
    LF 
    LF 
    LF j 
    LFI 
    I
    “c 
    “c : ø /
    : ø /
    i
    LF $
    $
    $
    ~
    10
    Insert for liquid detergent  model-dependent
    Position the insert for dispensing liquid detergent:
    – Remove the detergent drawer completely 
    apage 10 .
    – Slide the insert forwards. 
    Do not use the insert (slide upwards): 
    – for gel detergents and washing powder, 
    – for programmes with  7Prewash  or the end time  option.
    Care
    ‘Machine housing, control panel
    – Wipe with a soft, damp cloth. 
    – Do not use any abrasive cloths, scourers or cleani ng agents (stainless steel cleaners). 
    – Remove detergent and cleaning agent residue immedi ately.
    – Do not clean with a jet of water.
    Cleaning the detergent drawer ...
    ... if it contains detergent or fabric softener res idues.
    1. Pull out, press insert down, remove drawer complete ly.
    2. To remove the insert: press the insert upwards from  below with your finger.
    3. Clean the detergent dispenser tray and insert with  water and a brush and 
    dry it.
    4. Attach the insert and engage (connect the cylinder  to the guide pin).
    5. Push in the detergent drawer. 
    Leave the detergent drawer open so that any residua l water can 
    evaporate.
    ‘Drum
    Leave the washing machine door open so that the drum c an dry out.
    Rust stains - use chlorine-free cleaning agent, not  steel wool.
    ‘DescalingNo laundry in the machine.
    This is not necessary if the detergent is dosed correctl y. However, if it is necessary, follow the 
    instructions of the descaler manufacturer. Suitable  descaling products can be purchased from 
    our website or after-sales service ( a page 13 ).
    Information on the display panel     depending on model
    Door open?Close the washing machine door properly; laundry may be caught.
    Tap closed?Open the tap completely, supply hose kinked or trapped; Clean the 
    filter  a page 11 , Water pressure too low.
    Pump blocked?Detergent solution pump blocked; Clean the detergen t solution pump 
    a  page 11.
    Drainage hose/waste pipe blocked; Clean the drainag e hose at the 
    siphon  a page 11 .
    Top-up not possible; 
    water level too high
    or Temperature too highNot possible to add more laundry. To continue, pres s the Start/Reload 
    button.
    F: 23Water in the base tub, appliance leaking. Call the  after-sales service.
    F: 34Washing machine door cannot be locked. Open the was hing machine 
    door and close it with an audible click; switch t he appliance off and 
    on again; set the programme and make your settings;  start the 
    programme.
    Other displaysSwitch off the appliance, wait for 5 seconds and sw itch it back on. If 
    the display appears again, call the after-sales ser vice a page 13 .
    –Risk of electric shock. Disconnect the mains plug.
    – Risk of explosion. No solvents.
    11
    Information about blockages
    Detergent solution pump
    Turn the programme selector to  Off and disconnect the mains plug.
    1. Open and remove the service flap.
    2. Take the drainage hose out of the retainer. 
    Remove the sealing cap, allow the detergent solutio n to flow out.
    Push the sealing cap back on.
    3. Carefully unscrew the pump cover (residual water).
    4. Clean the interior, pump cover thread and pump housing  (the impeller in the detergent solution 
    pump must rotate).
    5. Replace the pump cover and screw it on tightly. The h andle is vertical. Place the drainage hose 
    back into the retainer.
    6. Place the service flap back on and close.
    To prevent unused detergent from flowing straight into  the drain during the next wash: Pour 1 litre of water into 
    compartment  II and start the  >Drain  programme.
    Drainage hose at the siphon
    Turn the programme selector to  Off and disconnect the mains plug.
    1. Loosen the hose clamp, carefully remove the drainage  hose (residual water).
    2. Clean the drainage hose and siphon connecting piece.
    3. Reattach the drainage hose and secure the connection with  the hose clamp.
    Filter in the water supply
    Risk of electric shock 
    Do no immerse the Aqua-Stop safety device in water (it contains an electrical valve).
    Reduce the water pressure in the supply hose:
    1. Turn off the tap.
    2. Select any programme (except  	Spin/  >Drain ).
    3. Choose  $Start /Reload. Let the programme run for approximately 40 secon ds.
    4. Turn the programme selector to  Off. Disconnect the mains plug.
    5. Clean the filter: 
    Disconnect the hose from the tap. 
    Clean the filter with a small brush. 
    and/or  for Standard and Aqua-Secure models:
    Remove the hose from the rear of the appliance.  
    Remove the filter with pliers and clean.
    6. Connect the hose and check for leaks.
    –Risk of scalding. Allow the detergent 
    solution to cool down.
    – Turn off the tap.
    ‘
    ‘$
    a
    ‘a
     a
    a
    ‘$
    a
    ‘ a
    a
    ‘
    ‘
     a
    a
    ‘
    ‘~ a
    ‘LF
    ‘³3
    ‘a
    a
    ‘
    ‘
    ‘
    c
    ‘$ $
    a
    a
    ‘a
    ‘
    ‘
    ‘
                            
    						
    							LF 
    LF 
    LF 
    LF j 
    LFI 
    I
    “c 
    “c : ø /
    : ø /
    i
    LF $
    $
    $
    ~
    a
    7
    ‘
    ‘
    ‘
    a
    a
    a
    a
    a
    >
    	>
    $
    12
    What to do if ...
    ‘Water is leaking out. – Attach/replace the drainage h ose correctly.
    – Tighten the screw connection of the supply hose.
    ‘No water supply.  
    Detergent not dispensed. –
    $ Start /Reload not selected?
    – Tap not turned on? 
    – Filter blocked? Clean the filter a page 11.
    – Supply hose kinked or trapped?
    ‘Washing machine door  
    cannot be opened. – Safety function active. Programme termination? 
    a page 4 .
    –  Rinse stop  (no final spin) selected?  a page 3, 4.
    – Can be opened by emergency release only? a page 13.
    ‘Programme does not  
    start. –
    $ Start/ Reload or  end time selected?
    – Washing machine door closed? 
    – Childproof lock active? Deactivate  a page 5 .
    ‘Detergent solution is not  
    drained. –
     Rinse stop  (no final spin) selected?  a page 3, 4.
    – Clean the detergent solution pump  a page 11.
    – Clean the waste pipe and/or drainage hose.
    ‘Water not visible in the  
    drum. – Not a fault - water below the visible area.
    ‘Spin result not  
    satisfactory. 
    Laundry wet/too damp.– Not a fault - the unbalanced load detection system
     has cancelled 
    the spin cycle due to uneven distribution of the la undry.
    Distribute large and small items of laundry evenly  in the drum.
    –  Easy-Iron   selected?  a page 5.
    – Speed selected too low?  a page 5 .
    ‘Spin cycle performed  
    several times. – Not a fault - unbalanced load detection system is 
    adjusting the 
    imbalance.
    ‘Residual water in the  ~  compartment for care 
    products. – Not a fault - the action of the care product is not a
    ffected.
    – Clean the insert if necessary  a page 10 .
    ‘Odour formation in the  
    washing machine. – Run programme 
    LFCottons 90 °C  without laundry. Use 
    standard detergent.
    ‘The ³3 status 
    indicatorlights. 
    Appliance has detected  
    a detergent overload. – Too much detergent used?
    Mix 1 tablespoon of fabric softener with ½ litre of  water and pour 
    into compartment  II(not with outdoor or down fabrics).
    – Reduce the detergent dosage for the next wash cycl e.
    ‘Loud noise generated,  
    vibrations and  
    “wandering” during the  
    spin cycle.– Are the appliance feet fixed?
    Secure the appliance feet a Installation instructions .
    – Transportation safety devices removed? Remove the transportation safety devices a  Installation instructions .
    ‘Display panel/indicator  
    lamps do not function  
    during operation. – Power cut? 
    – Circuit breakers tripped or fuses blown? Reset the
     circuit 
    breakers or change the fuses.
    – If the fault occurs repeatedly, call the after-sal es service.
    ‘Programme sequence  
    longer than usual.– Not a fault - unbalanced load detection system adj
    usts 
    imbalance by repeatedly distributing the laundry.
    – Not a fault - foam detection system active - sever al rinse cycles 
    are added.
    13
    What to do if ... 
    ‘Detergent residues on  
    the laundry. – Occasionally, phosphate-free detergents contain wa
    ter-insoluble 
    residues.
    – Select  
    cRinse  or brush the laundry after washing.
    ‘In Reload mode, $ Start/Reload flashes 
    very quickly and a signal  
    sounds. – Water level too high. Not possible to add laundry. Cl
    ose the 
    washing machine door immediately if necessary.
    – To continue, press the  $ Start/Reload button.
    If you cannot correct a fault yourself (switching o n/off) or a repair is required:
    – Turn the programme selector to  Off and remove the mains plug from the socket.
    – Turn off the water supply and call the after-sales  servicea page13.
    Emergency release  e.g. in the event of a power cut
    The programme continues when the power supply is re stored. However, if the laundry has to 
    be removed, the washing machine door can be opened  as follows:
    Risk of scalding. 
    The detergent solution and laundry may be hot. If p ossible, leave it to 
    cool down. 
    Do not reach into the drum if it is still rotating. 
    Do not open the washing machine door if water can b e seen through the 
    glass.
    1. Turn the programme selector to  Off and disconnect the mains plug.
    2. Drain the detergent solution  a page 11.
    3. Pull the emergency release downwards with a tool an d release.
    Washing machine door can then be opened.
    After-sales service
    ‘If you cannot rectify the fault yourself (Troublesh ooting a page 12, 13 ), please contact our 
    after-sales service. We will always find a suitable  solution and will avoid a visit from a service 
    technician wherever possible.
    ‘You can find the contact details for your nearest a fter-sales service here or in the after-sales 
    service directory (depending on model). 
    You find the regional service contact of all countries in  the enclosed service booklet.
    ‘Please give the after-sales service the product number (E no.) and the production number 
    (FD) of the appliance.
    Product number        Production number This information can be found: 
    on the inside of the washing machine door*/
    opened service flap* and rear of the appliance. 
    *depending on the model
    ‘Rely on the professionalism of the manufacturer.
     Please contact us. 
    This will ensure that the repair is carried out by  trained service technicians who arrive 
    equipped with genuine spare parts for your applianc e.
                            
    						
    							LF 
    LF 
    LF 
    LF j 
    LFI 
    I
    “c 
    “c : ø /
    : ø /
    i
    LF $
    $
    $
    ~
    a
    7
    ‘
    ‘
    ‘
    a
    a
    a
    a
    a
    >
    	>
    $
    ‘
    ‘$
    a
    ‘a
     a
    a
    ‘$
    a
    ‘ a
    a
    ‘
    ‘
     a
    a
    ‘
    ‘~ a
    ‘LF
    ‘³3
    ‘a
    a
    ‘
    ‘
    ‘
    c
    ‘$ $
    a
    a
    ‘a
    ‘
    ‘
    ‘
    Washing machine
    en Instruction manual
                            
    						
    All Bosch manuals Comments (0)

    Related Manuals for Bosch WAS 32742 User Manual