Bosch WLM 24441 User Manual
Have a look at the manual Bosch WLM 24441 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 101 Bosch manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
123456
Programme ended when ...
...Start/Pause $ indicator light goes out and or
(if was selected, without final spin) is indicated
on the display panel, the buzzer sounds. Set volume of
buzzer. a
page 6
Change the programme ...
If you have selected the wrong programme by mistake :
– Reselect the programme.
– Select Start/Pause
$.
Pause the programme ...
– Touch the Start/ Pause$ button.
– Follow the instructions in the display field: when ‰ lights
up and appears in the display, the door can be
opened. If required, add /remove a laundry item; If
and are displayed alternately, the door cannot be
opened due to a high water level in drum or a high
temperature.
– Touch
Start/ Pause $ button to continue the
programme.
... or terminate the programme
Programmes with high temperature:
– Cool down laundry: Select
Rinse 2.
– Select Start/Pause
$.
Programmes at lower temperature:
– Select
Empty >orSpin .
– Select Start/Pause
$.
(Spin speed)
You can change the indicated spin speed. The maximu m spin speed which can be selected
depends on the chosen programme. If is selected, the load is held in the rinsing water .
((Childproof lock) Programme cannot be changed by accidental operation .
To activate the childproof lock:
– After the programme starts, press and hold the
( button for 5 seconds;
– Release when the # symbol lights up.
When the programme ends, the Start/Pause
$ indicator remains on to remind you to
deactivate the childproof lock.
* # symbol flashes if the programme has been changed w hile childproof lock is activated.
To deactivate the childproof lock:
– Touch the
( button until the # symbol turns off;
– Release the button.
If the childproof lock is deactivated while the pro gramme selector is in a different position
from when the childproof lock was activated*, the r unning programme will be halted.
‘Additional functionssee also Programme overview apage 7
7 Pre-wash For heavily soiled, hard-wearing textiles. Pre-wash at
max. 30 °C.
= Water plus High water level to achieve better rinse result.
SEasy iron Special spin sequence with subsequent fluffing. Gen tle
final spin - residual moisture in the laundry increa sed
slightly.
Intensive Extends the washing time for a more intensive washing
of heavily soiled items.
The additional function indicator light is on when the option is selected; if the option is not
selectable for the programme, this is indicated by a short flashing of the light and an
accoustic signal.
‘Start/Pause $
For starting or pausing the programme.
‘Signals
Set to  Press andhold1 step
clockwise
Button signals Information signals
Set volume* Set volume* 1 step
clockwise Set to
Â
1. Start signal
mode
2. Set volume for ... Release
#
*If required, set repeatedly 1 step
clockwise
direct
Sorting and loading the laundry
Observe the care information provided by the manufa cturer.
Sort according to the information on the care label s.
Sort according to type, colour, soiling and tempera ture.
Remove any foreign objects - risk of rusting.
Do not exceed the maximum load. a
page 7
Observe the instructions in the Important informati on section.apage 9
Load both large and small items of laundry.
Close the washing machine door. Take care not to tr ap any items of clothing
between the loading door and rubber seal.
Add detergent and care product
Add the appropriate dose according to:
Amount of laundry, soiling, water hardness (ask you r water supply
company) and manufacturer’s instructions.
Models without insert for liquid detergent: pour li quid detergent into an
appropriate dispenser and place in the drum.
During operation: close the detergent drawer!
Correct installation according to
separate installation instructions.
Check the machine
– Never switch on a damaged machine!
– Inform your customer service!
Insert mains plug
With dry hands only!
Only hold the plug itself!
Turn on the tap
Compartment II : Detergent for the main wash, water softener,
bleach, stain remover
Your washing machine
Congratulations – You have opted for a modern, high–quality domest ic
appliance manufactured by BOSCH. The washing machin e is
distinguished by its economical use of water and en ergy.
Each appliance which leaves our factory has been in spected thoroughly
to ensure that it functions properly and is in perf ect condition.
For further information about products, accessories , spare parts and
services visit our web site: www.bosch-home.com or contact our after-
sales service centres.
Environmentally friendly waste disposal
All packaging must be disposed of in accordance wit h environmental
guidelines. This appliance is certified in accordan ce with European
Directive 2002/96/EEC on waste electrical and elect ronic equipment
(WEEE).This directive provides the framework for th e EU-wide collection
and reuse of used appliances.
Intended use
ContentsPage
‹Intended use ...................................... ................................................ 1‹Programmes ........................................ .............................................. 1
‹Preparation ..................................................................................... 2/3
‹Setting and adjusting programmes .................. ............................. 3‹Washing .......................................................................................... 3/4
‹Removing the laundry .............................. ........................................ 4
‹Display information, Options, Functions ........... ........................ 5/6‹Programme overview ......................................................................... 7
‹Safety instructions ............................................................................. 8
‹Consumption values ............................... ........................................ 8‹Important information ....................................................................... 9
‹Care ................................................................................................... 10
‹Information on the display panel................... ................................ 10‹Maintenance ..................................................................................... 11
‹What to do if .................................................................................... 12
‹Emergency release .................................. ........................................ 13
‹Customer service .................................. ...................................... 13
Protection of the environment/Conservation tips
–Always fill the washing machine with a maximum amou nt of
laundry for the relevant programme.
– Wash normally soiled laundry without prewash.
– Instead of the CottonsLF90 °C programme, select
Cottons Eco 60 °C and the(Intensive) additional function.
The cleaning result will be comparable, but energy consumption
will be significantly lower.
– Dose the detergent according to the manufacturer’s
instructions and water hardness.
– If the laundry is to be subsequently dried in a tu mble dryer, select
a spin speed as specified by the dryer manufacturer .
PreparationBefore washing for the first time,
wash once without any laundry apage 9
Setting and adjusting programmes
Display panel/
Option buttons/
Additional functionsProgramme selectorStart/
Pause
1
2 3
Washing
Compartment ~:Fabric softener, impregnating agent, starch
Compartment I : Detergent for pre–wash
‹For domestic use only.‹For washing machine-washable fabrics in a detergent
solution.
‹To be operated with cold mains water and
commercially available low foam detergents and care
products which are suitable for use in washing
machines.
– Do not leave children unattended near the
washing machine!
– The washing machine is not to be used by children or persons not familiar with the
operating instructions.
– Keep pets away from the washing machine!
Dilute viscous fabric softener and fabric condition er with water.
This prevents blockages.
‘Display symbols
‘Display information
*Before starting a programme, the
max. load for the selected
programme is displayed when the
door is open. The remaining time or
finish-in time is displayed when the
door is closed.
Display shown may vary depending
on the model and selected
programme.
‘Option buttons
You can change the spin speed and temperature befor ehand and while the selected
programme is running. The effects depending on the progress of the programme.
°C (Temp. )
You can change the indicated washing temperature. T he maximum washing temperature
which can be selected depends on the programme that has been chosen.
(Finish in)
When you select a programme, the respective program me duration is displayed. You can
delay the start of the programme before it begins. The finish-in time indicates when the
programme will be finished. It can be set in hour i ncrements up to a maximum of 24h. Press
and hold the (Finish in) button until the required number of hours is shown (h=hour).
Select Start/Pause
$.
þWashing :Not on if Rinse, Spin or Drain is selected.
Rinse :Not on if Spin or Pump is selected.
Spin :Not on if a programme with thesetting (no
final spin) is selected.
Water tap:Flashing - tap not open or no water
supply.
on – low water pressure.
‰ Door :On if door can be opened.
Overdosage:
On if too much detergent used.
Automatic load detection:
Automatically
detects the load size after water inlet phase and s ets
accurate remaining time. Symbols indicate small, mi ddle
and full loads measured* according to the recommend ed
max. load of the selected programme.
* Automatic display of the detected load only for w ashing
programmes with a max. load recommendation > 3.0 kg
except for Rinse, Spin and Drain. Different types o f textiles
with different water absorption rates may influence the
load display.
kg , e.g. kg : max. recommanded load for selected
programme apage 7, Programme overview
time , e.g.
: remaining time
: finish-in time defined by user
apage 5
: pause
: door can be opened in Pause status
: end of programme
: end of programme with the setting
set volume of signals
apage 6
: error display
apage 10
Removing laundry
– Open washing machine door and remove laundry.
If (Rinse stop = wihout final spin) is active: Selec t the
spin speed or set programme selector to Empty
>or
Spin .
– Select Start/Pause $.
– Remove any foreign objects - risk of rusting.
Turn off the tap
Information on Aquastop.
Installation instructions. apage 7.
Switch off
– Set Programm selector to ÂOff .
Programmes
Detailed programme overview.
apage 7
The temperature and spin speed can be selected
individually, irrespective of the selected programm e and
programme progress.
PowerWash 60’ ?
Hard–wearing textilesCottons LF
Cottons Eco
Easy-Care easy care textiles
Mix 1mixed types of laundry
Delicate/Silk “silk and delicate washable fabrics
:Wool Ohand–/machine–washable wool
Rinse 2extra rinse with spin
Spin extra spin with selectable spin speed
Empty >drain the rinising water with
(Rinse stop = no final spin)
Super Quick15’ @short programme
Sensitive hard–wearing textiles
Jeans ”dark-coloured textiles
Sports, Fitness $textiles made of microfibres
Shirts/Blouses ’non-iron shirts
Detergent drawer with
compartments I, II, ~
Control panel
Door handle
Drum
Display information, Options, Functions Options, Fun
ctions
All buttons are sensitive and a
gentle tap is adequate!
If you press and hold the Option
buttons, the setting options
automatically scroll through.
Select Start/Pause $
Washing
Service flap
If the
# symbol lights up or
flashes in the display panel, the
childproof lock is active. a deactivate, page 6
For additional functions and
option buttons, see the Individual
settings section. apage 5/6
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be rotated in either direction.
Read these instructions before switching on the was hing machine.
Also follow the separate installation instructions.
Observe the safety instructions on page 8.
7
Programme overview (see also the information on page 5, 6)
Programmes °Cmax.
(kg)
*
Type of laundry
Additional functions; information
Cottons LF
:90 °C
6,0**
Hard-wearing textiles, heat-resistant textiles made of
cotton or linen
7
Prewash ,= Water plus ,S Easy iron , Intensive
Cotton Eco
:60 °C
Sensitive
:60 °C
5,5**
Hard-wearing textiles made of cotton or linen
7
Prewash ,= Water plus ,S Easy iron , Intensive
For particularly sensitive skin, longer wash cycle at selected
temperature, higher water level, additional rinse c ycle.
PowerWash 60’ ?
:- 60 °C
3,0
Hard-wearing textiles made of cotton or blended fab ricTime-controlled programme, 60 minutes.
Short prgrameme for normally soiled laundry.
Easy-Care
:- 60 °C
3,5
Easy-Care textiles made of cotton, linen, synthetic fibres
or blended fabrics
7
Prewash ,= Water plus ,S Easy iron
Mix 1
:40 °C Textiles made of cotton and easy-care textiles
7
Prewash
,= Water plus ,S Easy iron , Intensive
Different types of textiles which can be washed tog ether.
Jeans
c”Dark-coloured fabrics made of cotton and dark easycar
e
fabrics 7
Prewash
,= Water plus ,S Easy iron , Intensive
Shirts/Blouses ’
:60 °C
2,0
Non-iron shirts made of cotton, linen, synthetic fi bres or
blended fabrics
7
Prewash ,= Water plus ,S Easy iron , Intensive
Short spin only, drip dry.
Delicates/Silk “
:40 °C For delicate, washable texitiles, e.g.made of silk,
satin,
synthetic fibres or blended fabrics
7
Prewash ,= Water plus ,S Easy iron
Short spin only between the rinse cycles.
: Wool O Hand- or machine- washable wool or wool-rich textil es.Particulary gentle wash programme to avoid shrinkag
e,
longer programme breaks (laundry rests in the deter gent
solution).Sports, Fitness $ Textiles for outdoor wear, made from microfibre
7
Prewash,= Water plus ,S Easy iron , Intensive
Super Quick 15’ @ Easy-Care textiles made of cotton, linen, synthetic
fibres
or blended fabrics Short programme approx. 15 minutes,
suitable for lightly soiled laundry.Additional programmes
6,0
Rinse
2, Spin , Empty >
‘
The programmes are time-controlled for lightly soil ed textiles. If textiles are heavily soiled, reduce the load and select additional function, e.g. (Intensive) .
Programmes without prewash - pour detergent into d ispenserII; programmes with prewash - divide detergent between dispensers I and II.
* Max. load according to IEC 60456 Ed.4.
** Select the (Intensive) additional function if washing max. kg of cottons a nd coloureds.
For further information and a selection of our products
go to our web site: http://www.bosch-home.com or contact our customer service centres
Robert Bosch Hausgeräte GmbH
Carl -Wery-Str.34
D-81739 Munich/Germany
WLM20461BY
WLM24441BY
9000634969
0211
8
Safety instructions
– Read and follow the operating and installation ins
tructions and all other information enclosed
with the washing machine.
– Retain documents for subsequent use.
Risk of electric shock – Never pull out the mains plug by tugging the power cord.
– Never insert/pull out the mains plug with damp han ds.
Risk of deathFor worn-out appliances:
– Pull out the mains plug.
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washing machine door. This will prevent children from locking themselves and risking their
lives.
Risk of suffocation – Keep packaging, plastic film and packaging parts o ut of the reach of
children.
Risk of poisioning – Keep detergents and care products out of the reach of children.
Risk of explosion– Items of laundry pretreated with cleaning agents c ontaining solvents,
e.g. stain remover/cleaning solvents may lead to an explosion after
being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforeha nd.
Risk of injury– Washing machine door may become very hot.
– Take care when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not touch the drum in case it is still spinning .
– Be careful when opening the detergent drawer while the machine is
in operation.
Consumption values
ProgrammeAdditional functionLoadElectricity
consumption***Water***Programme duration***
Cottons LF 30 °C—- 6.0 kg 0.29 kWh 57 l 1:33 h
Cottons LF 30 °C* Intensive 6.0 kg 0.31 kWh 57 l 2:03 h
Cottons LF 40 °C—- 6.0 kg 0.50 kWh 57 l 1:38 h
Cottons LF 40 °C*Intensive 6.0 kg 0.52 kWh 57 l 2:03 h
Cottons LF 60 °C—- 6.0 kg 0.85 kWh 57 l 1:43 h
Cottons LF 60 °C*Intensive 6.0 kg 0.89 kWh 57 l 2:03 h
Cottons LF 90 °C—- 6.0 kg 1.81 kWh 66 l 1:58 h
Easy-Care 40 °C —- 3.5 kg 0.45 kWh 54 l 1:00 h
Easy-Care 40 °C* Intensive 3.5 kg 0.49 kWh 54 l 1:20 h
Mix 1 40 °C —- 3.5 kg 0.53 kWh 50 l 1:03 h
Delicate/Silk “ 30 °C —- 2.0 kg 0.18 kWh 26 l 0:39 h
:Wool O 30 °C —- 2.0 kg 0.14 kWh 40 l 0:36 h
* Programme setting for testing according to the current ly valid version of EN60456.
Note for comparative testing: for testing the te st programmes, wash the specified load using the maximum spin speed.
ProgrammeAdditional
functionLoadAnnual energy
consumptionAnnual water consumption
Cottons Eco 40/60°C Intensive** 6/3 kg 196 kWh 8650 l
** Programme setting for testing and energy labellin g in accordance with directive 2010/30/EU and cold wa ter (15°C).
*** The values deviate from the indicated values depe nding on water pressure, hardness, and inlet temperature, ambient
temperature, type, amount and soiling of the la undry, detergent used, fluctuations in the power sup ply and selected
additional functions.
9
Important information
Preparing/Protecting the laundry and the machine
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a net/bag (tights, curtains, und erwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or in a laundry bag.
Before washing for the first time
Do not load any laundry into the machine. Turn on t he tap. Add the following to compartment
II :
– approx. 1 litre water
– detergent (dosage according to the manufacturers instructions for light soiling and the
appropriate degree of water hardness)
Set the programme selector to Easy-Care
60 °C and select Start/Pause $. At the end of
the programme, turn the programme selector to ÂOff .
Laundry with different degrees of soiling
Wash new items separately.
Light Do not prewash.
If required, pretreat stains. Select (Intensive) additional function.
Heavy Load less laundry. Prewash.
If required, pretreat stains. Select (Intensive) additional function.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into dispenser II according to the manufcturer’s instructions.
Set CottonsLF30 °C programme and select Start/Pause $. After approx. 10 minutes,
select Start/ Pause$. After the required soaking time, reselect Start/Pause u if the
programme is to be continued or change the programm e.
StarchingLaundry must not be treated with fabric softener
Starching is possible in all washing programmes if liquid starch is used. Add starch to the
fabric softener dispenser ~ in accordance with the manufacturer’s instructions .
Dyeing/bleaching
Dye in small quantities only. Salt can corrode stainless steel.
Observe the dye manufacturer’s instructions.
Do not bleach laundry in the washing machine.
10
Care
Machine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleani ng agents (stainless steel cleaners).
– Immediately remove laundry and cleaning agent resi dues.
– Do not clean the appliance with a water jet.
Clean the detergent drawer ...
... if it contains detergent or fabric softener res idues.
1. Pull out the drawer up to the stop position, press down the latch on the
insert and remove the drawer completely .
2. Remove insert: pull insert upwards with finger.
3. Clean the detergent dispenser and the insert with w ater and a brush.
4. Refit the insert and secure in place (the cylinder should fit over the
guide pin).
5. Insert the detergent drawer.
6. Leave the detergent drawer open so that residual wa ter can evaporate.
Drum
Leave the washing machine door open after washing s o that the drum can dry.
Rust stains – use chlorine–free cleaning agent, not steel wool.
Descaling No laundry in the machine!
This is not necessary if the detergent is dosed cor rectly. However, if it is necessary, follow the
instructions of the descaler manufacturer. Suitable descaling products can be purchased
from our website or after-sales service. apage 13
Information on the display
Please close the door immediately because of rising water level. In pause
status and are displayed alternately.
Door is locked due to safety reasons (water level a nd/or temperature are too
high); in pause status, and are displayed alternately. If you need
to open the door, wait for the temperature to drop or drain the water (e.g. select
Empty
c> programme).
Door cannot be locked/unlocked due to high temperat ure of the door lock.
Wait a moment and try again.
Flashing (no water supply):
Tap turned on?
Inlet filter blocked ? Clean filter. apage 11
Supply hose kinked or blocked ? On
(low water pressure):
Only information. No influence
on the programme process.
Clean drain pump; apage 11
outlet pipe/drainage hose blocked.
other displaysSwitch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call the customer ser vice apage 13
– Risk of electric shock!
Pull out the mains plug!
– Risk of explosion! No solvents!
11
Maintenance
Drain pump
– Set the programme selector to ÂOff , disconnect the mains plug.
1. Open and remove the service flap.
2.Release the drainage hose from the clip.
Remove the sealing plug from the drainage hose, all ow the detergent
solution to flow out. Push the sealing cap back in.
3. Remove the pump cap. Remove foreign objects/loose d ebris/fluff from
inside and clean the pump. (impeller in the pump mu st be able to rotate).
4.Clean any residual lye or fluff from the thread of the pump cap and
pump housing.
5. Attach the pump cap and screw it on tight until the stop, handle is upright.
Place the drainage hose back in the retainer.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight i nto the drain during
the next wash cycle: pour 1 litre of water into com partment II and start
the Empty
>programme. Then select and start a new washing
programme with detergent as usual.
Filter in the water inlet hose
Risk of electric shock
Do not immerse the Aqua-Stop safety device in water (it contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Spin /Empty
>).
3. Touch Start/Pause$ button and allow the programme to run for approx. 40 seconds.
4.
Set the programme selector to  Off.Disconnect the mains plug.
Clean the filter:
Standard Aqua-Stop
Aqua-Secure
1. Remove the supply hose from the tap.
Clean the filter with a small brush.
or
on standard and Aqua-Secure models:
Remove the hose from the rear, remove the filter
using pliers and clean the filter.
2.Reconnect the supply hose and check if it is tight.
– Risk of scalding!
Allow detergent solution to cool down!
– Turn off the tap!
12
What to do if ...
‘Water is leaking out. – Fit/refit drainage hose corre ctly.
– Tighten the screw connection of the supply hose.
‘No water supply.
Detergent not dispensed. –
Start /Pause $ not selected?
– Water tap not turned on?
– Supply hose filter blocked? Clean the filter. apage 11
– Supply hose kinked or trapped?
‘Washing machine door cannot be
opened. – Safety function active. Programme stopped?
apage 4
– (Rinse stop = no final spin) selected? apage 6
– Can be opened by emergency release only. apage13
‘Programme does not start. – Start/Pause $ or Finish-in time selected?
– Washing machine door closed?
‘Detergent solution is not drained. – Clean the drain pump. apage 11
– Clean waste pipe and/or drainage hose.
‘Water not visible in the drum. – Not a fault - water b elow the visible area.
‘Spin result not satisfactory. – Wash small and large items of laundry together.
– S Easy iron selected? apage 6
– Speed selected too low? apage 6
‘Spin cycle performed several
times. – Not a fault - unbalanced load detection system adj
usts
the imbalance.
‘Compartment ~ not rinsed out
completely. – Remove the insert. Clean detergent drawer and inse
rt.
a page 10
‘Odour formation in the washing
machine. – Run the
CottonsLF90 °C programme without
laundry.
– Use standard detergent.
‘Foam escapes from the detergent
drawer. – Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water
and pour into compartment II in the detergent drawer .
– Reduce detergent dosage for the next wash cycle.
‘Excessive noise, vibrations and
“wandering” during spin cycle. – Are the appliance feet fixed?
Secure the appliance feet. aInstallation instructions,
page 5
– Transport bolts removed? Remove transport bolts.
Installation instructions, page 3
‘Display panel/indicator lamps do
not light up while the appliance is
running. – Power failure/off? Interrupted programme will be
resumed when power returns.
– Circuit breaker tripped? Reset the circuit breaker /
change the fuse.
– If the fault occurs repeatedly, call the customer service.
‘Programme sequence longer than
usual.– Not a fault - unbalanced load detection system adj
usts
imbalance by repeatedly distributing the laundry.
– Not a fault - foam detection system active - adds a n
additional rinse cycle.
‘Detergent residues on the laundry. – Occasionally, p hosphate-free detergents contain water-
insoluble residues.
– Select Rinse
2 or brush the laundry after washing.
‘If you cannot correct a fault yourself or a repair is required:
– Turn the programme selector to ÂOff and pull the mains plug out of the socket.
– Turn off the tap and call the customer services. apage 13
13
Emergency release e.g. in the event of power failure
Interrupted programme will be resumed when power re turns.
However, if the laundry has to be removed, the wash ing
machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot.
If possible, leave it to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can b e seen
through the glass.
– Set the programme selector to ÂOff and disconnect the mains plug.
– Drain the detergent solution. apage 11
– Pull the emergency release with a tool and release . The washing
machine door can then be opened.
Customer service
‘If you cannot rectify the fault yourself apage 12: What to do if ... , please contact our after-
sales service. We will always find a suitable solut ion and will avoid a visit from a service
technician wherever possible.
‘The contact details for all countries can be found i n the enclosed after-sales service directory.
‘ Please give the customer service the product numbe r (E-Nr.) and the production number
(FD) of the appliance.
Product number Production number You will find the identification plate containing
this information on the frame of the open door ,
and of the rating plate on the back of the
appliance.
Rely on the professionalism of the manufacturer. Please contact us.
This will ensure that the repair is carried out by trained service technicians who arrive
equipped with genuine spare parts for your applianc e.
Washing machine WLM20461BY
WLM24441BY
en Instruction manual
12
$
a
$$ ‰
$ 2
$
>
$
(
(
# $
#
( #
‘a
7 = S
‘ $
‘
Â
Â
#
a
a
Clo
M
Correct installation according to
separate installation instructions.
Check the machine
– Never switch on a damaged machine!
– Inform your customer service!
Insert mains plug
With dry hands only!
Only hold the plug itself!
Turn on the tap
Compartment II
: Detergent for the main wash, water softener,
bleach, stain remover
Your washing machine
Congratulations – You have opted for a modern, high–quality domest ic
appliance manufactured by BOSCH. The washing machin e is
distinguished by its economical use of water and en ergy.
Each appliance which leaves our factory has been in spected thoroughly
to ensure that it functions properly and is in perf ect condition.
For further information about products, accessories , spare parts and
services visit our web site: www.bosch-home.com or contact our after-
sales service centres.
Environmentally friendly waste disposal
All packaging must be disposed of in accordance wit h environmental
guidelines. This appliance is certified in accordan ce with European
Directive 2002/96/EEC on waste electrical and elect ronic equipment
(WEEE).This directive provides the framework for th e EU-wide collection
and reuse of used appliances.
Intended use
ContentsPage
‹Intended use ...................................... ................................................ 1‹Programmes ........................................ .............................................. 1
‹Preparation ..................................................................................... 2/3
‹Setting and adjusting programmes .................. ............................. 3‹Washing .......................................................................................... 3/4
‹Removing the laundry .............................. ........................................ 4
‹Display information, Options, Functions ........... ........................ 5/6‹Programme overview ......................................................................... 7
‹Safety instructions ............................................................................. 8
‹Consumption values ............................... ........................................ 8‹Important information ....................................................................... 9
‹Care ................................................................................................... 10
‹Information on the display panel................... ................................ 10‹Maintenance ..................................................................................... 11
‹What to do if .................................................................................... 12
‹Emergency release .................................. ........................................ 13
‹Customer service .................................. ...................................... 13
Protection of the environment/Conservation tips
–Always fill the washing machine with a maximum amou nt of
laundry for the relevant programme.
– Wash normally soiled laundry without prewash.
– Instead of the CottonsLF90 °C programme, select
Cottons Eco60 °C and the(Intensive) additional function.
The cleaning result will be comparable, but energy consumption
will be significantly lower.
– Dose the detergent according to the manufacturer’s
instructions and water hardness.
– If the laundry is to be subsequently dried in a tu mble dryer, select
a spin speed as specified by the dryer manufacturer .
Preparation
a
Display panel/
Option buttons/
Additional functionsProgramme selector
Compartment ~:Fabric softener, impregnating agent, starch
Compartment I : Detergent for pre–wash
‹For domestic use only.‹For washing machine-washable fabrics in a detergent
solution.
‹To be operated with cold mains water and
commercially available low foam detergents and care
products which are suitable for use in washing
machines.
– Do not leave children unattended near the
washing machine!
– The washing machine is not to be used by children or persons not familiar with the
operating instructions.
– Keep pets away from the washing machine!
‘ ‘ ‘
$
þ
‰
a
a
a
a
>
$
a Â
Programmes
Detailed programme overview. a
page 7
The temperature and spin speed can be selected
individually, irrespective of the selected programm e and
programme progress.
PowerWash 60’ ?
Hard–wearing textilesCottons LF
Cottons Eco
Easy-Care easy care textiles
Mix 1mixed types of laundry
Delicate/Silk “silk and delicate washable fabrics
:Wool Ohand–/machine–washable wool
Rinse 2extra rinse with spin
Spin extra spin with selectable spin speed
Empty >drain the rinising water with
(Rinse stop = no final spin)
Super Quick15’ @short programme
Sensitive hard–wearing textiles
Jeans ”dark-coloured textiles
Sports, Fitness $textiles made of microfibres
Shirts/Blouses ’non-iron shirts
~
$
#
a
a
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be rotated in either direction.
Read these instructions before switching on the was hing machine.
Also follow the separate installation instructions.
Observe the safety instructions on page 8.
LF:
7= S
:
: 7
= S
? :
: 7= S
1 : 7
= Sc”
7= S
’ : 7
= S
“
: 7
= S
: O $ 7= S
@ 2 >
‘
34
Programme ended when ...
...Start/Pause $ indicator light goes out and or
(if was selected, without final spin) is indicated
on the display panel, the buzzer sounds. Set volume of
buzzer.
apage 6
Change the programme ...
If you have selected the wrong programme by mistake :
– Reselect the programme.
– Select Start/Pause $
.
Pause the programme ...
– Touch the Start/ Pause$ button.
– Follow the instructions in the display field: when ‰ lights
up and appears in the display, the door can be
opened. If required, add /remove a laundry item; If
and are displayed alternately, the door cannot be
opened due to a high water level in drum or a high
temperature.
– Touch
Start/ Pause $ button to continue the
programme.
... or terminate the programme
Programmes with high temperature:
– Cool down laundry: Select
Rinse2 .
– Select Start/Pause $.
Programmes at lower temperature:
– Select
Empty> orSpin .
– Select Start/Pause $.
(
(
# $
#
( #
‘a
7 = S
‘ $
‘
Â
Â
#
Sorting and loading the laundry
Observe the care information provided by the manufa
cturer.
Sort according to the information on the care label s.
Sort according to type, colour, soiling and tempera ture.
Remove any foreign objects - risk of rusting.
Do not exceed the maximum load.
apage 7
Observe the instructions in the Important informati on section.apage 9
Load both large and small items of laundry.
lose the washing machine door. Take care not to tra p any items of clothing
between the loading door and rubber seal.
Add detergent and care product
Add the appropriate dose according to:
Amount of laundry, soiling, water hardness (ask you r water supply
company) and manufacturer’s instructions.
Models without insert for liquid detergent: pour li quid detergent into an
appropriate dispenser and place in the drum.
During operation: close the detergent drawer!
‹‹
‹
‹ ‹
‹
‹ ‹
‹
‹‹ ‹
‹‹
‹ ‹
‹
LF
Before washing for the first time,
wash once without any laundry apage 9
Setting and adjusting programmes
Start/
Pause
1
2 3
Washing
~
‹ ‹ ‹
Dilute viscous fabric softener and fabric condition
er with water.
This prevents blockages.
‘ ‘ ‘
$
þ
‰
a
a
a
a
Removing laundry
– Open washing machine door and remove laundry. If (Rinse stop = wihout final spin) is active: Selec t the
spin speed or set programme selector to Empty >or
Spin .
– Select Start/Pause
$.
– Remove any foreign objects - risk of rusting.
Turn off the tap
Information on Aquastop.
Installation instructions. apage 7.
Switch off
– Set Programm selector to ÂOff .
a
?
LF
1 “
: O 2
>
@
” $
’
Detergent drawer with
compartments I, II, ~
Control panel
Door handle
Drum
All buttons are sensitive and a
gentle tap is adequate!
If you press and hold the Option
buttons, the setting options
automatically scroll through.
Select Start/Pause $
Washing
Serviceflap
If the
# symbol lights up or
flashes in the display panel, the
childproof lock is active.
adeactivate, page 6
For additional functions and
option buttons, see the Individual
settings section.
apage 5/6
LF :
7= S
:
: 7
= S
? :
: 7= S
1 : 7
= Sc”
7= S
’ : 7
= S
“
: 7
= S
: O $ 7= S
@ 2 >
‘
56
$
a
$$ ‰
$
2
$
>
$
(Spin speed)
You can change the indicated spin speed. The maximu m spin speed which can be selected
depends on the chosen programme. If is selected, the load is held in the rinsing water .
((Childproof lock) Programme cannot be changed by accidental operation .
To activate the childproof lock:
– After the programme starts, press and hold the
( button for 5 seconds;
– Release when the
# symbol lights up.
When the programme ends, the Start/Pause $ indicator remains on to remind you to
deactivate the childproof lock.
*
# symbol flashes if the programme has been changed w hile childproof lock is activated.
To deactivate the childproof lock:
– Touch the
( button until the # symbol turns off;
– Release the button.
If the childproof lock is deactivated while the pro gramme selector is in a different position
from when the childproof lock was activated*, the r unning programme will be halted.
‘Additional functionssee also Programme overview apage 7
7Pre-washFor heavily soiled, hard-wearing textiles. Pre-wash at
max. 30 °C.
=Water plus High water level to achieve better rinse result.
SEasy iron Special spin sequence with subsequent fluffing. Gen tle
final spin - residual moisture in the laundry increa sed
slightly.
Intensive Extends the washing time for a more intensive washing
of heavily soiled items.
The additional function indicator light is on when the option is selected; if the option is not
selectable for the programme, this is indicated by a short flashing of the light and an
accoustic signal.
‘Start/Pause $
For starting or pausing the programme.
‘Signals
Set to ÂPress andhold1 step
clockwise
Button signals Information signals
Set volume* Set volume* 1 step
clockwise Set to
Â
1. Start signal
mode
2. Set volume for ... Release
#
*If required, set repeatedly1 step
clockwise
direct
a a
‹‹
‹
‹ ‹
‹
‹ ‹
‹
‹‹ ‹
‹‹
‹ ‹
‹
LF
a
~
‹ ‹ ‹‘Display symbols
‘Display information
*Before starting a programme, the
max. load for the selected
programme is displayed when the
door is open. The remaining time or
finish-in time is displayed when the
door is closed.
Display shown may vary depending
on the model and selected
programme.
‘Option buttons
You can change the spin speed and temperature befor ehand and while the selected
programme is running. The effects depending on the progress of the programme.
°C (Temp. )
You can change the indicated washing temperature. T he maximum washing temperature
which can be selected depends on the programme that has been chosen.
(Finish in)
When you select a programme, the respective program me duration is displayed. You can
delay the start of the programme before it begins. The finish-in time indicates when the
programme will be finished. It can be set in hour i ncrements up to a maximum of 24h. Press
and hold the
(Finish in) button until the required number of hours is shown (h=hour).
Select Start/Pause $.
þWashing :Not on if Rinse, Spin or Drain is selected.
Rinse :Not on if Spin or Pump is selected.
Spin :Not on if a programme with the setting (no
final spin) is selected.
Water tap:Flashing - tap not open or no water
supply.
on – low water pressure.
‰
Door :On if door can be opened.
Overdosage:On if too much detergent used.
Automatic load detection:
Automatically
detects the load size after water inlet phase and s ets
accurate remaining time. Symbols indicate small, mi ddle
and full loads measured* according to the recommend ed
max. load of the selected programme.
* Automatic display of the detected load only for w ashing
programmes with a max. load recommendation > 3.0 kg
except for Rinse, Spin and Drain. Different types o f textiles
with different water absorption rates may influence the
load display.
kg , e.g. kg : max. recommanded load for selected
programme apage 7, Programme overview
time , e.g.
: remaining time
: finish-in time defined by user a
page 5
: pause
: door can be opened in Pause status
: end of programme
: end of programme with the setting
set volume of signals a
page 6
: error display a
page 10
>
$
a Â
a
?
LF
1 “
: O 2
>
@
” $
’ ~
Display information, Options, Functions Options, Fun
ctions
$
#
a
a
LF:
7= S
:
: 7
= S
? :
: 7= S
1 : 7
= Sc”
7= S
’ : 7
= S
“
: 7
= S
: O $ 7= S
@ 2 >
‘
$
a
$$ ‰
$ 2
$
>
$
(
(
# $
#
( #
‘a
7 = S
‘ $
‘
Â
Â
#
a a
‹‹
‹
‹ ‹
‹
‹ ‹
‹
‹‹ ‹
‹‹
‹ ‹
‹
LF
a
~
‹ ‹ ‹‘ ‘ ‘
$ þ
‰
a
a
a
a
>
$
a Â
a
?
LF
1 “
: O 2
>
@
” $
’ ~
$
#
a
a
7
Programme overview (see also the information on page 5, 6)
Programmes °Cmax.
(kg)
*
Type of laundry
Additional functions; information
Cottons LF
:90 °C
6,0**
Hard-wearing textiles, heat-resistant textiles made of
cotton or linen 7
Prewash ,= Water plus ,S Easy iron , Intensive
Cotton Eco
:60 °C
Sensitive
:60 °C
5,5**
Hard-wearing textiles made of cotton or linen 7
Prewash ,= Water plus ,S Easy iron , Intensive
For particularly sensitive skin, longer wash cycle at selected
temperature, higher water level, additional rinse c ycle.
PowerWash 60’ ?
:- 60 °C
3,0
Hard-wearing textiles made of cotton or blended fab ricTime-controlled programme, 60 minutes.
Short prgrameme for normally soiled laundry.
Easy-Care
:- 60 °C
3,5
Easy-Care textiles made of cotton, linen, synthetic fibres
or blended fabrics 7
Prewash ,= Water plus ,S Easy iron
Mix 1
:40 °C Textiles made of cotton and easy-care textiles
7
Prewash ,= Water plus ,S Easy iron , Intensive
Different types of textiles which can be washed tog ether.
Jeans
c”
Dark-coloured fabrics made of cotton and dark easycar e
fabrics
7 Prewash ,= Water plus ,S Easy iron , Intensive
Shirts/Blouses ’
:60 °C
2,0
Non-iron shirts made of cotton, linen, synthetic fi bres or
blended fabrics 7
Prewash ,= Water plus ,S Easy iron , Intensive
Short spin only, drip dry.
Delicates/Silk “
:40 °C For delicate, washable texitiles, e.g.made of silk,
satin,
synthetic fibres or blended fabrics 7
Prewash ,= Water plus ,S Easy iron
Short spin only between the rinse cycles.
: Wool O Hand- or machine- washable wool or wool-rich textil es.Particulary gentle wash programme to avoid shrinkag
e,
longer programme breaks (laundry rests in the deter gent
solution).Sports, Fitness $ Textiles for outdoor wear
, made from microfibre
7Prewash ,= Water plus ,S Easy iron , Intensive
Super Quick 15’ @ Easy-Care textiles made of cotton, linen, synthetic
fibres
or blended fabrics Short programme approx. 15 minutes,
suitable for lightly soiled laundry.Additional programmes
6,0
Rinse
2, Spin , Empty >
‘ The programmes are time-controlled for lightly soil ed textiles. If textiles are heavily soiled, reduce the load and select additional function, e.g. (Intensive) .
Programmes without prewash - pour detergent into d ispenserII; programmes with prewash - divide detergent between dispensers I and II.* Max. load according to IEC 60456 Ed.4.
** Select the
(Intensive) additional function if washing max. kg of cottons and coloureds.
For further information and a selection of our products
go to our web site: http://www.bosch-home.com or contact our customer service centres
Robert Bosch Hausgeräte GmbH Carl -Wery-Str.34
D-81739 Munich/Germany
WLM20461BY
WLM24441BY
9000634969
0211
8
Safety instructions
– Read and follow the operating and installation ins
tructions and all other information enclosed
with the washing machine.
– Retain documents for subsequent use.
Risk of electric shock – Never pull out the mains plug by tugging the power cord.
– Never insert/pull out the mains plug with damp han ds.
Risk of deathFor worn-out appliances:
– Pull out the mains plug.
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washing machine door. This will prevent children from locking themselves and risking their
lives.
Risk of suffocation – Keep packaging, plastic film and packaging parts o ut of the reach of
children.
Risk of poisioning – Keep detergents and care products out of the reach of children.
Risk of explosion– Items of laundry pretreated with cleaning agents c ontaining solvents,
e.g. stain remover/cleaning solvents may lead to an explosion after
being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforeha nd.
Risk of injury– Washing machine door may become very hot.
– Take care when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not touch the drum in case it is still spinning .
– Be careful when opening the detergent drawer while the machine is
in operation.
Consumption values
ProgrammeAdditional functionLoadElectricity
consumption***Water***Programme duration***
Cottons LF 30 °C—- 6.0 kg 0.29 kWh 57 l 1:33 h
Cottons LF 30 °C*Intensive 6.0 kg 0.31 kWh 57 l 2:03 h
Cottons LF 40 °C—- 6.0 kg 0.50 kWh 57 l 1:38 h
Cottons LF 40 °C*Intensive 6.0 kg 0.52 kWh 57 l 2:03 h
Cottons LF 60 °C—- 6.0 kg 0.85 kWh 57 l 1:43 h
Cottons LF 60 °C*Intensive 6.0 kg 0.89 kWh 57 l 2:03 h
Cottons LF 90 °C—- 6.0 kg 1.81 kWh 66 l 1:58 h
Easy-Care 40 °C —- 3.5 kg 0.45 kWh 54 l 1:00 h
Easy-Care 40 °C*Intensive 3.5 kg 0.49 kWh 54 l 1:20 h
Mix 1 40 °C —- 3.5 kg 0.53 kWh 50 l 1:03 h
Delicate/Silk “ 30 °C —- 2.0 kg 0.18 kWh 26 l 0:39 h
:Wool O 30 °C —- 2.0 kg 0.14 kWh 40 l 0:36 h
* Programme setting for testing according to the curr ently valid version of EN60456.
Note for comparative testing: for testing the t est programmes, wash the specified load using the ma ximum spin speed.
ProgrammeAdditional
functionLoadAnnual energy
consumptionAnnual water consumption
Cottons Eco 40/60°CIntensive** 6/3 kg 196 kWh 8650 l
** Programme setting for testing and energy labellin g in accordance with directive 2010/30/EU and cold wa ter (15°C).
*** The values deviate from the indicated values depe nding on water pressure, hardness, and inlet temperature, ambient
temperature, type, amount and soiling of the l aundry, detergent used, fluctuations in the power su pply and selected
additional functions.
9
Important information
Preparing/Protecting the laundry and the machine
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a net/bag (tights, curtains, und erwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or in a laundry bag.
Before washing for the first time
Do not load any laundry into the machine. Turn on t he tap. Add the following to compartment
II :
– approx. 1 litre water
– detergent (dosage according to the manufacturers instructions for light soiling and the
appropriate degree of water hardness)
Set the programme selector to Easy-Care
60 °C and select Start/Pause $. At the end of
the programme, turn the programme selector to ÂOff .
Laundry with different degrees of soiling
Wash new items separately.
Light Do not prewash.
If required, pretreat stains. Select (Intensive) additional function.
Heavy Load less laundry. Prewash.
If required, pretreat stains. Select (Intensive) additional function.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into dispenser II according to the manufcturer’s instructions.
Set CottonsLF30 °C programme and select Start/Pause $. After approx. 10 minutes,
select Start/ Pause$. After the required soaking time, reselect Start/Pause u if the
programme is to be continued or change the programm e.
StarchingLaundry must not be treated with fabric softener
Starching is possible in all washing programmes if liquid starch is used. Add starch to the
fabric softener dispenser ~ in accordance with the manufacturer’s instructions .
Dyeing/bleaching
Dye in small quantities only. Salt can corrode stainless steel.
Observe the dye manufacturer’s instructions.
Do not bleach laundry in the washing machine.
a
c>
a
a
a
Â
> >
$
Â
‘ ‘
$
a
‘a
a
a
‘$
‘a
‘ ‘
S a
a
‘ ‘
~ a
‘LF
‘ ‘
a
‘ ‘ ‘
2
‘Â
a Â
a
‘a
‘ ‘
LF
LF
LF
LF
LF
LF
LF
1 “
: O
$
Â
LF $
$ u
~
10
Care
Machine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleani ng agents (stainless steel cleaners).
– Immediately remove laundry and cleaning agent resi dues.
– Do not clean the appliance with a water jet.
Clean the detergent drawer ...
... if it contains detergent or fabric softener res idues.
1. Pull out the drawer up to the stop position, press down the latch on the
insert and remove the drawer completely .
2. Remove insert: pull insert upwards with finger.
3. Clean the detergent dispenser and the insert with w ater and a brush.
4. Refit the insert and secure in place (the cylinder should fit over the
guide pin).
5. Insert the detergent drawer.
6. Leave the detergent drawer open so that residual wa ter can evaporate.
Drum
Leave the washing machine door open after washing s o that the drum can dry.
Rust stains – use chlorine–free cleaning agent, not steel wool.
Descaling No laundry in the machine!
This is not necessary if the detergent is dosed cor rectly. However, if it is necessary, follow the
instructions of the descaler manufacturer. Suitable descaling products can be purchased
from our website or after-sales service.
apage 13
Information on the display
Please close the door immediately because of rising water level. In pause
status and are displayed alternately.
Door is locked due to safety reasons (water level a nd/or temperature are too
high); in pause status, and are displayed alternately. If you need
to open the door, wait for the temperature to drop or drain the water (e.g. select
Empty
c> programme).
Door cannot be locked/unlocked due to high temperat ure of the door lock.
Wait a moment and try again.
Flashing (no water supply):
Tap turned on?
Inlet filter blocked ? Clean filter.
apage 11
Supply hose kinked or blocked ? On
(low water pressure):
Only information. No influence
on the programme process.
Clean drain pump; apage 11
outlet pipe/drainage hose blocked.
other displaysSwitch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call the customer ser vice apage 13
– Risk of electric shock!
Pull out the mains plug!
– Risk of explosion! No solvents!
11
Maintenance
Drain pump
– Set the programme selector to ÂOff , disconnect the mains plug.
1. Open and remove the service flap.
2.Release the drainage hose from the clip.
Remove the sealing plug from the drainage hose, all ow the detergent
solution to flow out. Push the sealing cap back in.
3. Remove the pump cap. Remove foreign objects/loose d ebris/fluff from
inside and clean the pump. (impeller in the pump mu st be able to rotate).
4.Clean any residual lye or fluff from the thread of the pump cap and
pump housing.
5. Attach the pump cap and screw it on tight until the stop, handle is upright.
Place the drainage hose back in the retainer.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight i nto the drain during
the next wash cycle: pour 1 litre of water into com partment II and start
the Empty
>programme. Then select and start a new washing
programme with detergent as usual.
Filter in the water inlet hose
Risk of electric shock
Do not immerse the Aqua-Stop safety device in water (it contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Spin
/Empty>).
3. Touch Start/Pause$ button and allow the programme to run for approx. 40 seconds.
4.
Set the programme selector to ÂOff.Disconnect the mains plug.
Clean the filter:
Standard Aqua-Stop
Aqua-Secure
1. Remove the supply hose from the tap.
Clean the filter with a small brush.
or
on standard and Aqua-Secure models:
Remove the hose from the rear, remove the filter
using pliers and clean the filter.
2.Reconnect the supply hose and check if it is tight.
– Risk of scalding!
Allow detergent solution to cool down!
– Turn off the tap!
‘ ‘
$
a
‘a
a
a
‘$
‘a
‘ ‘
S a
a
‘ ‘
~ a
‘LF
‘ ‘
a
‘ ‘ ‘
2
‘Â
a
Â
a
‘a
‘ ‘
LF
LF
LF
LF
LF
LF
LF
1 “
: O
$
Â
LF $
$ u
~ a
c>
a
a
a Â
> >
$
Â
12
What to do if ...
‘Water is leaking out. – Fit/refit drainage hose corre ctly.
– Tighten the screw connection of the supply hose.
‘No water supply.
Detergent not dispensed. –
Start /Pause $ not selected?
– Water tap not turned on?
– Supply hose filter blocked? Clean the filter.
apage 11
– Supply hose kinked or trapped?
‘Washing machine door cannot be
opened. – Safety function active. Programme stopped? apage 4
– (Rinse stop = no final spin) selected? apage 6
– Can be opened by emergency release only.
apage13
‘Programme does not start. – Start/Pause $ or Finish-in time selected?
– Washing machine door closed?
‘Detergent solution is not drained. – Clean the drain pump. apage 11
– Clean waste pipe and/or drainage hose.
‘Water not visible in the drum. – Not a fault - water below the visible area.
‘Spin result not satisfactory. – Wash small and large items of laundry together.
–
SEasy iron selected? apage 6
– Speed selected too low? apage 6
‘Spin cycle performed several
times. – Not a fault - unbalanced load detection system adj
usts
the imbalance.
‘Compartment ~ not rinsed out
completely. – Remove the insert. Clean detergent drawer and inse
rt. apage 10
‘Odour formation in the washing
machine.– Run the
CottonsLF90 °C programme without
laundry.
– Use standard detergent.
‘Foam escapes from the detergent
drawer. – Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water
and pour into compartment II in the detergent drawer .
– Reduce detergent dosage for the next wash cycle.
‘Excessive noise, vibrations and
“wandering” during spin cycle. – Are the appliance feet fixed?
Secure the appliance feet. aInstallation instructions,
page 5
– Transport bolts removed? Remove transport bolts.
Installation instructions, page 3
‘Display panel/indicator lamps do
not light up while the appliance is
running. – Power failure/off? Interrupted programme will be
resumed when power returns.
– Circuit breaker tripped? Reset the circuit breaker /
change the fuse.
– If the fault occurs repeatedly, call the customer service.
‘Programme sequence longer than
usual.– Not a fault - unbalanced load detection system adj
usts
imbalance by repeatedly distributing the laundry.
– Not a fault - foam detection system active - adds an
additional rinse cycle.
‘Detergent residues on the laundry. – Occasionally, p hosphate-free detergents contain water-
insoluble residues.
– Select Rinse
2 or brush the laundry after washing.
‘If you cannot correct a fault yourself or a repair is required:
– Turn the programme selector to ÂOff and pull the mains plug out of the socket.
– Turn off the tap and call the customer services.
apage 13
13
Emergency release e.g. in the event of power failure
Interrupted programme will be resumed when power re turns.
However, if the laundry has to be removed, the wash ing
machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot.
If possible, leave it to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can b e seen
through the glass.
– Set the programme selector to ÂOff and disconnect the mains plug.
– Drain the detergent solution.
apage 11
– Pull the emergency release with a tool and release . The washing
machine door can then be opened.
Customer service
‘If you cannot rectify the fault yourself apage 12: What to do if ... , please contact our after-
sales service. We will always find a suitable solut ion and will avoid a visit from a service
technician wherever possible.
‘The contact details for all countries can be found in the enclosed after-sales service directory.
‘ Please give the customer service the product numbe r (E-Nr.) and the production number
(FD) of the appliance.
Product number Production number You will find the identification plate containing
this information on the frame of the open door ,
and of the rating plate on the back of the
appliance.
Rely on the professionalism of the manufacturer. Please contact us.
This will ensure that the repair is carried out by trained service technicians who arrive
equipped with genuine spare parts for your applianc e.
LF
LF
LF
LF
LF
LF
LF
1 “
: O
$
Â
LF $
$ u
~ a
c>
a
a
a Â
> >
$
Â
‘ ‘
$
a
‘a
a
a
‘$
‘a
‘ ‘
S a
a
‘ ‘
~ a
‘LF
‘ ‘
a
‘ ‘ ‘
2
‘Â
a Â
a
‘a
‘ ‘
Washing machine WLM20461BY
WLM24441BY
en Instruction manual