Bose 201 Series IV DirectReflecting speaker system Sold from 1996 to 2002 User Manual

201® Series IV Direct/ Reflecting® Speakers
Owner’s Guide
October 30, 2001
AM183562_04_V.pdf 

2             October 30, 2001              AM183562_04_V.pdf
Introduction
Thank you
Congratulations on your purchase of Bose® 201® Series IV Direct/Reflecting® speakers.
Their integrated system of advanced Bose technologies delivers superior sound reproduc-
tion from a bookshelf design.
For your records
Serial numbers are located on the back of each 201® speaker.
Serial numbers: ________________________________________________________________
Dealer name:...

       AM183562_04_V.pdf                                                                                  October 30, 2001                                                                                           3
Contents
Where to find...
Setting Up
Before you begin ........................................................................................................ 4
Unpack the carton ...................................................................................................... 4
Select the...

4             October 30, 2001              AM183562_04_V.pdf
Setting Up
1             12             2
Before you begin
Your Bose® 201® Series IV Direct/Reflecting® speakers are designed to create a listening
experience that is very similar to a live concert. There are two basic ways to place your
speakers in a room. Try both and let your personal taste determine which is best.
The first way takes advantage of Stereo Targeting
® technology, with the tweeters firing
inward to create an intimate or...

       AM183562_04_V.pdf                                                                                  October 30, 2001                                                                                           5
Setting Up
Select the locations for your 201® speakers
The following guidelines are intended to help you find the best sounding location for your
new speakers:
• Listen to both speaker sound patterns shown on page 4, Figure 1. Choose the one you
prefer.
1. First, aim the tweeters inward as...

6             October 30, 2001              AM183562_04_V.pdf
Setting Up
Figure 4
Terminal connections
Choose the cord
Caution: Never use broken or frayed wiring. It can result in electrical shock or damage.
It is important to use the proper gauge (thickness) of speaker wire. Standard zip cord
(2-conductor, 18-gauge wire) works best for most applications. You can find this wire at
most electrical and hardware stores.
You will need thicker wire if your speakers will be more than 30 feet (9 m) from a...

       AM183562_04_V.pdf                                                                                  October 30, 2001                                                                                           7
Setting Up
Check the connections
Check that all connections are made positive to positive (+ to +) and negative to negative
(– to –) (Figure 5). Make sure that no loose strands of wire touch across terminals. This
could damage your receiver or amplifier. Be sure the connections are secure...

8             October 30, 2001              AM183562_04_V.pdf
Maintaining Your 201® Series IV Speakers
Troubleshooting
Problem What to do
No sound • Make sure the receiver or amplifier is plugged in and turned on.
• Check to be sure the AC power (mains) outlet is working.
• Disconnect any headphones plugged into the headphone jack.
• Make sure the receiver or amplifier is not set to MUTE.
• Refer to the owner’s guide that came with your receiver or
amplifier.
• Check all connections at both the speaker...

       AM183562_04_V.pdf                                                                                  October 30, 2001                                                                                           9
Maintaining Your 201® Series IV Speakers
Cleaning the speakers
Clean the surface of your speakers with a soft, damp cloth. A mild soap may be used, but
do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or
abrasives. Do not use any sprays near the system or...

10             October 30, 2001              AM183562_04_V.pdf
Product Information
Technical information
Features
Direct/Reflecting® speaker design
Dual Frequency
TM crossover network
Stereo Targeting
®  technology
Syncom
® computer quality control
Driver complement (per enclosure)
One (1) 61⁄2 (16 cm) woofer
One (1) 2 (5 cm) high-sensitivity tweeter
Compatibility/Impedance
Compatible with amplifiers and receivers rated from 10 to 120 watts per channel,
rated 8 ohms
Wire recommendations
Based on a...