Home > Bose > Home Theater System > Bose 3 2 1 Gsx Owners Guide

Bose 3 2 1 Gsx Owners Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Bose 3 2 1 Gsx Owners Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 223 Bose manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							7
    SETUP
    ItalianoSvenska
    Deutsch Nederlands
    English Français
    Español
    1. On the bottom of each speaker, attach one set of 
    small rubber feet.
    2. Place the left and right speakers: 
     at least 3 feet (1 meter) apart
     within 3 feet (1 meter) of the TV screen 
     near the front edge of any shelf
     aimed straight ahead (not angled) to face the  listening area
    3. On the legs of the Acoustimass
    ® module, attach the 
    large rubber feet. 4.
    Place the Acoustimass module: 
     at the same end of the room as the speakers and  your TV
     at least 3 feet (1 meter) from the TV to prevent  interference with the screen
     several feet (.8 meters) from audio or video tapes  to prevent magnetic damage to them
     standing upright, not lying on a side, the front, or  the back
     with the front port aimed out from or along a wall  for balanced performance
     hidden under a table, behind a sofa or chair, or  behind drapes as preferred
     NOT in an enclosure, on a bed, on a sofa, or on a  surface that can block the ventilation openings.CAUTION:  Do not block ventilation openings on the 
    bottom and rear of the module. 
    5.Place the media center:
     where nothing obstructs  the front panel
     near any components you  will connect
    6. Continue with   on the 
    next page.
    2
     
    						
    							8
    SETUP
    Italiano
    Svenska Deutsch
    Nederlands English
    Français Español
    1. Notice the two plugs at one end of the speaker 
    cable.
    2. Separate the two plugs so each one reaches a 
    speaker.
    (Refer to   for placement guidelines.)
    2
    Connecting 
    the speakers 
    to the module
    What you need to use:
    Speakers Acoustimass
    ® module
    Speaker cable
    1
     
    						
    							9
    SETUP
    ItalianoSvenska
    Deutsch Nederlands
    English Français
    Español
    3. Insert each plug into the connector on the proper 
    speaker. 
    The plug marked RIGHT goes into the speaker 
    placed to the right of your TV. 4.
    Insert the remaining single plug into the connector 
    labeled SPEAKERS on the  back of the Acousti-
    mass
    ® module.
    5. Tighten each fastener screw by hand to secure 
    the plug.
    CAUTION:   Do not plug the Acoustimass module into an 
    AC power (mains) outlet until all other components are 
    connected.
    6. Continue with   on the next page.
    Fastener screws 
    3
     
    						
    							10
    SETUP
    Italiano
    Svenska Deutsch
    Nederlands English
    Français Español
    1. Notice the arrow on the top of the multi-pin plug at 
    each end of the Acoustimass module cable.
    2. Make sure you can see the arrow on top before you 
    insert either end of the cable.
    3
    Connecting 
    the module to 
    the media center
    What you need to use:
    Acoustimass® module cable
    Media center
    Acoustimass module
    Arrow
     
    						
    							11
    SETUP
    ItalianoSvenska
    Deutsch Nederlands
    English Français
    Español
    3. Insert this plug into the connector labeled   on 
    the back of the Acoustimass
    ® module.
    Make sure the arrow on the plug faces up as you 
    insert it. 4.
    On the other end of the cable, make sure you can 
    see the arrow on top of the plug.
    5. Insert this plug into the connector labeled 
    Acoustimass Module on the back of the 
    media center.
    6. Continue with   on the next page.
    4
     
    						
    							12
    SETUP
    Italiano
    Svenska Deutsch
    Nederlands English
    Français Español
    This connection allows you to see DVDs and other 
    
    ® system on your TV. 
    1. Select the HDMI video cable.
    4
    Connecting the 
    system video 
    to your TV
    What you may need to use:
    HDMI             OR 
    video cable     Composite
    video cable
    Media center
    Yo u r  T V
     
    						
    							13
    SETUP
    ItalianoSvenska
    Deutsch Nederlands
    English Français
    Español
    2. Check to see if your TV has an unused HDMI 
    connector for VIDEO IN. 
    This may be located on the side or rear connector 
    panel of the TV. 3.
    Follow the directions that are appropriate 
    for your TV:
    or  TV with
     HDMI
    TV without
     HDMI
    on page 14
    on page 15
     
    						
    							14
    SETUP
    Italiano
    Svenska Deutsch
    Nederlands English
    Français Español
    1. Insert one end of the HDMI cable into the HDMI 
    connector on your TV.
    Match the wide side of the plug to the wide side 
    of the connector. 2.
    Insert the other end of this cable into the HDMI 
    connector on the media center.
    Make sure the Bose
    ® logo shows as you insert the 
    plug.
    3. Continue with   on page 17.
    TV with HDMI
    Bose 
    logo
    5
    Note:  If you make this HDMI connection, you do not 
    need the supplied yellow Composite video cable to make 
    any connections. 
    DO NOT use either of the two ONLY PASS-THROUGH 
    connectors on the back of the media center for video from 
    a component.Neither S-Video nor Composite signals can 
    pass through the HDMI cable to the TV. 
     
    						
    							15
    SETUP
    ItalianoSvenska
    Deutsch Nederlands
    English Français
    Español
    1. Notice the yellow plug at each end of the 
    Composite video cable.
    Note:  There may be other kinds of video connectors on 
    your TV that offer higher resolution than Composite. 
    To use either S-Video or Component connectors, you 
    need the appropriate cables. These cables are available 
    at most electronics stores. 2.
    Plug the Composite video cable into the yellow 
    VIDEO IN connector on your TV.Note:  If there is just one Composite Video In connector 
    on your TV, it may be in use already for another video 
    component. You can disconnect that component from 
    the TV, and see “To use video pass through” on page 21. 
    TV without HDMI
    Yellow Yellow
     
    						
    							16
    SETUP
    Italiano
    Svenska Deutsch
    Nederlands English
    Français Español
    3. Insert the other end into the yellow Composite 
    VIDEO OUT connector on the back of the 
    media center.
    a
    . 
    Note:  If you make this Composite connection, you can 
    use the ONLY PASS-THROUGH connector on the media 
    center for video from another component. See “To use 
    video pass through” on page 21 for further information.
    4. Continue with   on the next page.
    5
     
    						
    All Bose manuals Comments (0)

    Related Manuals for Bose 3 2 1 Gsx Owners Guide