Boxlight Bl Wx25nu/x25nu Series User Manual

							19
Remote Control (Optional)
Power
Power on / operation mode, Standby mode, 
Cooling-down mode.
ESC
Press ”ESC” button, it will close ”Menu” 
picture.
Vol +/-
Sound louder or lower.
Menu
Display or hide the OSD main menu page.
Keystone +/-
Adjusts the vertical keystone function.
Still
Keep the current image on the Screen.
Blank
Hide the current image, become black color 
on the screen.
Auto
Refresh the current image.
Menu up/down, Menu left/right
Selecting and adjusting the function of OSD.
INPUT source
Select input source: 
→ Computer 1 → Computer 2     
Computer 1 ← S-Video ← Composite Video ← 
Mouse
Select an item or adjust value in the On-
Screen Menu.
Zoom in / Zoom out
Zoom in or zoom out.
Mute
Mute audio.
Laser pointer
Use laser pointer from remote control. 
						

							20
Menu Operation
How To Operate On-Screen Display
1.  You could press "Menu" button. It will be shown blue main menu. The 
first	main	menu	is	"	PICTURE"	menu.
2.   Choose which item you want to enter, you could press up / down /left/ 
right button of control panel or remote control to adjust item or value.\
Up / Down / Right / Left button
Menu button
007
POWER
LASER
MOU SE-LAUTO BLANKMOUSE-R
MUTE
MENU
INPUTLASER
INDICATORPower
Laser
Menu 
						

							21
MENU (PC Mode)
Picture Menu
Step:
1.	Use	the	▲	/▼	buttons	to	
select an item.
2.	 Use	the	◄	/	►	cursor	
buttons to select an item or 
adjust the value.
Item Selection Description
BRIGHTNESS 000/100 Adjust the image brightness level.
CONTRAST 000/100 Adjust the image contrast level.
SHARPNESS 000/015 Adjusts the image sharpness.
DISPLAY MODE NATURAL Natural color.
CINEMA Enhance contrast ratio when displaying DVD contents.
DAYLIGHT Suitable when ambient light is strong.
GREEN BOARD
WHITE BOARD
BLACK BOARD
Adjust the color settings to make the projected image on 
a (green, white, black) board more visible.
USER User Red     000/100
User Green  000/100
User Blue    000/100
007 
						

							22
MENU (PC Mode)
Audio Menu
Step:
1.	Use	the	▲ 	/▼	buttons	
to select an item.
2.	 Use	the	◄	/	►	
buttons to select an 
item or adjust the 
value.
Item Selection Description
VOLUME 00/40 Adjust the volume.
MUTE OFF/ON Mute the volume OFF / ON. 
						

							23
MENU (PC Mode)
Setting Menu
Step:
1.	Use	the	▲	/▼buttons	to	
select an item.
2.	 Use	the	◄	/	►	buttons	
to select an item or adjust 
the value.
Item Selection Description
H POSITION 000/100Move the image position horizontally.
This function is only selected for computer signal.
V POSITION 000/100 Move the image position vertically.
This function is only selected for computer signal.
PHASE 000/100 Adjust the image sharpness.
FREQUENCY 000/200 Set the horizontal scanning frequency. AUTO
KEYSTONE OFF/ON Correct keystone distortion in image automatically.
KEYSTONE V -70/+70 Correct vertical keystone distortion in image manually. AUTO SYNC EXECUTE Set all of the above setting automatically.
AUTO SEARCH OFF/ON Search signal source manually or automatically.
KEYPAD  BEEP OFF/ON
Turn the Beep of Keypad OFF / ON.
*DVI doesn't support H POSITION, V POSITION, PHASE, FREQUENCY and AUTO SYNC. 
						

							24
MENU (Video Mode)
Picture Menu
Step:
1.	Use	the	▲	/▼	buttons	
to select an item.
2.	 Use	the	◄	/	►	cursor	
buttons to select an 
item or adjust the 
value.
Item Selection Description
BRIGHTNESS 000/100 Adjust the image brightness level.
CONTRAST 000/100 Adjust the image contrast level.
SHARPNESS 000/015 Adjusts the image sharpness.
COLOR 000/100 Adjust the strength of whole color.
This function can be used under video signal, S-Video 
signal, or component video signal input only. 
TINT 000/100 Adjust the image tint.
This function can be used under video signal, S-Video 
signal, or component video signal.
DISPLAY MODE NATURAL Natural color.
CINEMA Enhance contrast ratio when displaying DVD contents.
DAYLIGHT Suitable when ambient light is strong.
GREEN BOARD
WHITE BOARD
BLACK BOARD
Adjust the color settings to make the projected image on 
a (green, white, black) board more visible.
USER User Red     000/100
User Green 000/100
User Blue   000/100
007 
						

							25
MENU (Video Mode)
Audio Menu
Step:
1.	Use	the	▲	/▼	buttons	to	
select an item.
2.	 Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
Item Selection Description
VOLUME 00/40 Adjust the volume.
MUTE OFF/ON Mute the volume OFF / ON. 
						

							26
MENU (Video Mode)
Setting Menu
Step:
1.	Use	the	▲	/▼buttons	to	
select an item.
2.	 Use	the	◄	/	►	buttons	to	
select an item or adjust the 
value.
Item Selection Description
AUTO KEYSTONE OFF/ON Automatically Correct keystone distortion in image.
KEYSTONE V -70/+70 Correct vertical keystone distortion in image manually.
AUTO SEARCH OFF/ON Search signal source manually or automatically. KEYPAD  BEEP OFF/ON
Turn the Beep of Keypad OFF / ON. 
						

							27
MENU
Advanced Menu
Step:
1.	Use	the	▲	/▼buttons	
to select an item.
2.	 Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
Item Selection Description
ZOOM / PAN EXECUTE Execute digital zoom and pan function.
FREEZE OFF/ON Freeze the current image on the screen.
BLANK OFF/ON Hide the image, display a black screen.
BLANK POWER OFF 15/30/60 
Minute
Set power off time after blank.
RESET EXECUTE Reset all menu function to their factory default values.
RESIZE  4:3,16:9, 1:1
LANGUAGE ENGLISH Select the language that the menu and on screen massage is 
display in
English繁體中文
简体中文
日本語
한국어
Nederlands
Français
Deutsch
Italiano
SuomiPolski PortuguêsРусский
Español
Svenska
Українська
ไทย
SELECT SOURCE EXECUTE Select the input source from:
RGB 1       RGB 2 
S-Video
Video
DVI-I
Y,Pb,Pr
The search is started from the current port. Then when an 
input is found, the projector will stop searching and display 
the image.
LOGO SETTING EXECUTE Customize the start-up logo. 
						

							28
MENU
Advanced Menu
LOGO SETTING
This function allows you 
to customize the start-up 
logo.
IMPORTANT:
To implement Logo 
setting function, please 
enter PIN code first. 
Without inputting the PIN 
code, you cannot modify 
Logo setting function. 
Item SelectionDescription
LOGO MODEDEFAULT
USER
OFF Select	Mode(	►	cursor	button)
The factory logo.
The image you captured.
The blank image. You can select color with background 
function.
LOGO
CAPTURE EXECUTE Start to capture the image.(PC mode only)
BACKGROUND BLACK
BLUE
WHITESet background color.
LOGO SIZE ORIGINAL
FULL Display the captured image in original size and put in the 
center of the screen.
Expend the image to full screen.