Boxlight Bl X25nu/x25nu User Manual

29
MENU
NOTE	 ►To	capture	an	image	is	available	only	in	computer	mode.
	 ►The	area	that	can	be	captured	is	512	x	384	dots.
Advanced Menu
Logo Capture
How to use this function?
		 Select Logo Capture item in the logo 
setting	menu,	and	press	►	button.
		 You can see the red frame to select 
captured area.
		 Use 4 direction buttons to adjust the 
position of the frame.
		 Press “MENU” to start capturing and 
display a dialog. 
Image

Logo Capture In Progress. 

30
MENU
Presentation Menu
Step:
1.	Use	the	▲	/▼buttons	
to select an item.
2.	 Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
Item Selection Description
AUTO CEILING OFF / ONAutomatically invert the image when the projector is turned 
upside down, i.e. when the projector is mounted on the 
ceiling.
FRONT EXECUTE Normal projection mode.
CEILING EXECUTE Mirror the image vertically, only for the projector mounted 
upside down.
REAR EXECUTEMirror the image horizontally, only for projecting...

31
MENU
NOTE
►		The	replacement	warning	message	is	set	to	appear	after	about	2000	hours	of	lamp	use	in	order	
to maintain the initial brightness. When replacement message appears, replace the lamp with a 
new one as soon as possible, even if the lamp is still workable.
Presentation Menu
Reset Lamp Timer
The lamp timer is the time counted after the last resetting. The usage time of the lamp 
is	shown	in	the	PRESENTATION	Menu.	Pressing	the	RESET 	button	or	the	►	button	
displays a dialog.
To	reset	the	lamp...

32
MENU
Security Menu
Step:
1.	Use	the	▲	/▼buttons	to	
select an item.
2.	 Use	the	◄	/	►	buttons	
to select an item or adjust 
the value.
Item Selection Description
PIN LOCK 
PROTECTIONOFF
ON 1
ON 2OFF: Turn off PIN lock protection.
ON 1: 
  After plugging in AC power, you need to key in PIN 
code	at	the	first	time	of	use.	If	the	 AC	power	stays	
unplugged, you do not need to key in PIN code next 
time when you use the projector.
ON 2:    You need to key in PIN code every time when you 
turn on the...

33
MENU
Security Menu
Step:
1.	Use	the	▲	/▼buttons	to	
select an item.
2.	 Use	the	◄	/	►	buttons	to	
select an item or adjust the 
value.
Item Selection Description
FILTER TIMERShow	the	filter	use	hour.
RESET FILTER
TIMER EXECUTE
Reset	the	filter	timer	after	cleaning	/	changing	filter.
FILTER COUNTER 500 hours
800 hours
1000 hoursSelect (500 / 800 / 1000 hours) depending on the 
environment.(default : 500 hours). Please see as below.
MAC ADDR. If purchasing LAN control module, "MAC ADDR." will be...

34
MENU
NOTE
►	Please	reset	the	Filter	time	only	when	you	replace	the	filter.
Auto Filter Alert
Auto	Filter	Alert	is	in	SECURITY 	category	to	show	the	air	filter	use	time	and	alert	user	
to	change	filter.	Pressing	►	cursor	button	will	display	a	dialog.	 When	the	operating	time	
reaches	the	set	time,	a	warning	message	will	appear	on	the	screen	to	remind	user	of	filter	
cleaning / replacing.
Filter Replace...
Filter has been used for more than 500 hours. 

35
MENU
POWERLASER
MOUSE-LAUTO BLANKMOUSE-R
MUTE
MENU
INPUTLASER
INDICATOR
POWER
LASER
MOUSE-L
AUTO BLANK
MOUSE-R
MUTE
MENU
INPUTLASER
INDICA TOR
PIN Key In Operation
When the projector is turned on and the 
PIN LOCK PROTECTION is set to [ON], 
the image will show as on the right side.
1.  Press the MENU button on the projector 
or remote control. Enter PIN code by 
keypad or remote control.
2.  How to enter a PIN code? 
You can use control panel or remote 
control.
CONTROL PANEL 
KEYSTONE REMOTE...

36
Network Control Software Application
	 
Register the projector(s) which needs to be controlled. 
" Auto search " can help you to seek the projector(s) source easily. 
After registering in the work group, you can start to control the projec\
tor.
		Group the projector(s) into different sections. 
You can monitor the status easily by the sort of group name function in t\
he network.
		Monitor the status for each projector. 
a.You can manage and change the monitoring content by System...

37
Before Use 
Before To Use Network Control Software
		If the system is Windows 2000, NT 4.0 ,XP ,Vista or Windows 7, the PC should be 
started by the Administrator.
		
Before starting the Network Control software, please check the following\
.
(1) The computer must have Network Control software installed.
(2)    The projector should be powered on and the LAN wire is well connected to\
 
projector.
(3)The LAN module ON/OFF item in SECURITY menu of OSD should be setting ON.
(4)   Make sure the computer...

38
Network Control Software Application
Network Control is provided in visual interface, it can help user to mon\
itor and manage the 
projector(s) status in the local area network.
1.  Register the projector(s) which needs to be controlled. 
" Auto search " can help you to seek the projector(s) source easily. 
After registering in the work group, you can start to control the projec\
tor.
2.   Group the projector(s) into different sections. 
You can monitor the status easily by the sort of group...