Boxlight Projector Write 6 User Manual

							79  Network Cont r ol   Softwa r e   Application   
   
  ITEM   SETTING   DESCRIPTION  
Basic  
Projector   Name   Show   projector   name   on   the   current   projecto r .  
Power   Power   On   or   Power   O f f   the   projector   via   network.  
Input   Source   Select   input   source.  
Pictu r e  
Brightness   Adjust   the   image   brightness   level.  
Contrast   Adjust   the   image   contrast   level.  
Sharpness   Adjust   the   image   sharpness.  
Color   Adjust   the   strength   of   whole   colo r .  
This   function   can   only   be   used   under   V ideo   signal,   S - V ideo   signal,   or   component 
video   signal   input.  
T int   Adjust   the   image   tint.  
This   function   can   be   used   under   V ideo   signal,   S - V ideo   signal,   or   component   video 
signal.  
Display   Mode   Adjust  Natural/Cinema/Daylight/Green  Board/White   Board/Black/User   Mode.  
Audio  
V olume   Adjust   the   volume.  
Mute   Mute   the   volume   OFF   / ON.  
Setting  
Keystone   Manually   correct   vertical   keystone   distortion   in   image.  
Auto   Sync   Set   all   of the   above   setting   automaticall y .   (This   function   can   only   be   used   under   PC  
mode)  
Auto   Search   Search   signal   source   manually   or   automaticall y .  
Advanced  
Blank   Blank   the   current   image   on   the   screen  
Blank   Power   O f f   No   / 15   / 30   / 60   (minutes)  
Freeze   Freeze   the   current   image   on   the   screen.  
Resize   4:3,16:9,   1:1,   16:10  
Reset   All   Reset   all   menu   function   to   their   factory   default   values.  
P r esentation  
Projection   Select  
Front/Ceiling/Rear/Ceiling  and   Rear  
Lamp   Mode   Switch   lamp   mode   between   Powerful   or   Normal   mode.   
						

							80  Network Cont r ol   Softwa r e   Application   
   
Network :  
Set  up  network configuration and password from this page.
 
 
   
 
 
  ITEM  
SETTING  DESCRIPTION  
Network
 
DHCP   Assign   an   IP   address   to   the   projector   from   the   DHCP   server   automaticall y .  
IP 
Address   Set   up  IP  Address   when   DHCP   is   disabled.  
Subnet   Mask   Set   up   Subnet   Mask   when   DHCP   is   disabled.  
Gateway
  Set   up   Gateway   when   DHCP   is  disabled.  
DNS   Server   Set   up   DNS   Server   address   when   DHCP   is   disabled.  
Group   Name   Create   projector   group   (Max   length:   14   characters) .  
Projector  
Name   Create   projector   naming   of   the   current   projecto r   (Max   length:   14  characters).  
Password
 
Administrator  
T ur n   ON/OF F   administrativ e  passwor d   function.   Administrato r   mod e   can 
control   the   conditions   on  
web.  
New   Password   Enter  
administrative password (Max  length:   15   characters) .  
Confirm  
Password   Re - enter   administrative  password.   
						

							81  Network Cont r ol   Softwa r e   Application   
   
Alert:  
Show  and  setup Alert  configurations.    
 
When  problem  occurs  to the projector,  it will  automatically  send  e-mail  to remind user. 
How  to  operate:  
1.  Enter  Email  Setting  columns.  
2.  Enter  SMTP  Setting  columns.  
3.  Select  Alert  Condition.  Multiple  choices  are  fine. 
4.  Press  Submit  to confirm.  
5.  After  completing  Alert  Setting  for  the  first  time,  it is   recommended  that  you  press  Issue  Test  Mail  to 
see  if  the  attendees  can  receive  the  e-mail.   If the   attendees  cannot  receive  the  e-mail,  please  check  if 
the  setting  is  correct or  not.   If you   have  questions  with  the Alert  Setting,  please  contact  your  network 
service  provider
. 
  ITEM  
SETTING  DESCRIPTION  
Email   Setting  
 
To   Set   up   the   mail   alert   attendee   (Max   length:   40   characters) .  
Cc   Set   up   the   backup   mail   alert   attendee   (Max   length:   40   characters) .  
Subject   Set   up   the   subject   of   the   alert   e - mail   (Max   length:   40   characters) .  
From   Set   up   the   sender   e - mail   address   (Max   length:   40   characters) .  
SMTP   Setting  
 
Server   T o   ente r   th e   SMT P   serve r    (Mai l   server )    nam e   o f   th e   compan y    o r  
IP  
Address  (Max   length:   40   characters) .  
User   Name  
Enter   the   sende r ‟ s   e - mail   addre ss   (Max   length:   40   characters) .  
For   example:   [email protected]  
Password
  Enter   password   of   the   sende r ‟ s   e - mail   account   (Max   length:   15   characters) .  
Alert  Condition  
 
Fan   Lock   The   cooling   fan   is   not   operating.  
Over   T emperature   The   projector   internal   is   over   heated.  
Lamp   fail   The   lamp   does   not   light  
up.  
Lamp   T ime   Alert   Lamp   has   reached   its   life   time.   Suggest   changing   the   lamp.  
Lamp   Cover   Opened   Lamp   Cover   does   not   close   well.  
Filter   T ime   Alert   Filter   has   reached   its   life   time.   Suggest   cleaning   the   filte r
.   
						

							82  Network Cont r ol   Softwa r e   Application   
   
  
Schedule :  
Show  and  set  up  Schedule,  including  Weekly  Schedule  and  Specific Da y. 
  Weekly  Schedule  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
To  power  on and power  off  projector  based  on Weekly  Schedule.  
How  to set 
up: 
1.  Choose  week 
days. 
2.  Set  up  power- on or  power-off  time.  
(Be  sure  that  the interval  between  power- on  and  off  setting  is more  than  5 minutes.)  
3.  Enter  Input  Source  and select  input  source.  
4.  After  completing  setting,  press  ADD to  confirm.  
5.  To  cancel  items,  select  the item  and press  Cancel  button. 
  Specific 
Day   
Based  on
  Specific  Day  to  set  up power- on  and  power-off time. 
How  to  set 
up: 
1.  Choose  power- on  days  and  time.  
2.  Choose  power-off  days  and  time.  
(Be  sure  the setting  period  between  power- on  time  and  off  time  is greater  than  5 minutes.)  
3.  Enter  Input  Source  and select  input  source.  
4.  After  completing  setting,  press  ADD to  confirm.  
5.  To  cancel  items,  select  the item  and press  Cancel  button.  
						

							83   
 
 
 B
N
ee
ft
o w
re or
U k
se Cont
rol Software  Application 
  Time 
: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Current System Time Setting: Refresh the date/time on the webpage  if you click  
 
“Refresh” 
button. 
 
2. System Time Setting : To set the date/time manually  
 
Enter the Date in Month/Day/Y ear 
format. 
Enter
 the Time  in Hour/Minute/Second format.  
3. Click the  “Submit” button to save your setting.  
 
Creston:   Projectors  detailed  setting  from  Creston.  
 
 
    
						

							84   
 
NB et
owroe r
U k
se Cont
rol  Software  Application
 
 
  ITEM   SETTING   DESCRIPTION  
Power
  Power   On   or   Power   O f f   the   projector   via  network.  
V ol   +   ( V olume  
+)   Adjust   the   volume  up.  
V ol   +   ( V olume   - )   Adjust   the   volume   down.  
Mute
  Mute   the   volume   OFF   /  ON.  
Source  
List  
Select   input  source. RGB1
 RGB2
 
HDMI/DVI 
VIDEO  
S-VIDEO USB
 
Brightness   Adjust   the   image   brightness   level.  
Contrast
  Adjust   the   image   contrast  level.  
Color   Adjust   the   strength   of   whole   colo r .  
Thi s   functio n  can   onl y   b e   use d   unde r   V ide o  signal ,  S - V ide o  s i g n a l ,  or
 
component   video   signal   input.  
Sharpness
  Adjust   the   image  sharpness.  
ZOOM   Zoom   in/Zoom   out   and   Pan.  
Menu
  Display   or   hide   the   OSD   main  menu.  
UP/Down   buttons   Use   UP/Down   buttons   to   select   an  item .  
Left/Right  
buttons   Use   left/right   buttons   to   select   a n   item   or   adjust   the  value.  
Source
 RGB1->RGB2->HDMI->USB->Video->S-Video->RGB1.  
Enter   Use   Enter   buttons   to   select   an   item.  
Auto
  Automatically   adjust   the   setting   to   match   the   current  input.  
Blank   Blank   the   projected   image.   The   time   of   Blank   mode   can   be   set   in   15   minutes,  
30   minutes   or   60   minutes.   The   projector   will   shut   down   automatically   
after  
passing   each   set  time.  
 
About the Tools button:  
  
Se t  up  network configuration, projector network  web  browser login  password  and se t  projector name  
from this page.  
    
						

							85   
 
B
N
ee
ft
o w
re or
U k
se Cont
rol Software  Application 
 
  1.  Click    button 
to leave  this 
page. 
2. Creston Control 
Projector Name:  
Displays the projector name used to identify the projector when connected  to a network. 
When editing, you can enter up to 14 single-byte alphanumeric characters.  
Location:  
Show  the  location  where the  projector is. When editing,  you  can  enter  up to  14   single- 
byte alphanumeric characters.  
Assigned To:  
Displays  the  name  used  to  identify who  the  projector  is  assigned  to  b y   someone 
wh o  can manage a network.  
When editing, you can enter up to 14 single-byte alphanumeric characters.  
Click   
button  to send and save the setting that  you
 modify. 
  P r ojecto r ’ s Network Configuration  
DHCP   Enabled   A   s   s   ig n   a n   I P  
a d d r es   s   t o   th e   p r o j e c t o r   f r o m   th e   D   H   C P   s   e r v e r  
automaticall y .  
IP   Address   Set   up IP   Address when DHCP   is   disabled.  
Subnet   Mask   Set   up Subnet   Mask when DHCP   is   disabled.  
Gateway   Set   up Gateway   when DHCP   is   disabled.  
DNS Server   Set   up DNS Server   address when DHCP   is   disabled.  
Click    
button  to  send  and  save  the  setting  that  you 
modify. 
  Admin Password  
Enabled   T urn   ON administrative   password function   if   selected.  
New Password   Enter   administrative   password   (Max length:   15 characters).  
Confirm  
Password   Re - enter   administrative   password.  
Click    
button  to  send  and  save  the  setting  that  you 
modify. 
  User   Password  
Enabled   T urn   ON User password function   if   selected.  
New Password   Enter   administrative   password   (Max length:   15 characters).  
Confirm  
Password   Re - enter   administrative   password.  
Click    
button  to  send  and  save  the  setting  that  you 
modify.  
						

							86   
 
 
 
 
 NB et
owroe r
U k
se Cont
rol Software  Application 
 
  About  the  “Info”  button:  
Show  current  projector  status  from  this  page.  Press  exit  button  to leave  this 
page. 
   
 
Click    button 
to  leave  this 
page. 
  About  the  “Contact IT  Help ”: 
   
 
Click  to close Contact  IT Help window dialog.  
Click  to send the message  to Creston ‟s device and projector.  
  Logout:   logging  out 
of the  projector  network 
control. 
    
						

							87  Maintenance   of P r ojector  
 
Air   Filter   
   
 
 
 
 
   
 
 
 
 
  
When a warning message appears to remind you to clean the air filter, replace a new 
one as soon as possible. Check and clean the air filter periodically.  
 
Replacing the Air Filter  
When the use time reaches the filter counter time, the projector will display a message 
that indicates to replace a new filter. If there is no spare air filter available, contact your 
dealer.  
 
 
 
 
 
 
 
 
Up 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
New one 
 
 
 
 
Turn off the projector, and unplug the power cord. Allow the projector to sufficiently  
cool down.  
 
 Remove the filter cover from the right side of projector.
 
  Pull out the air filter.
 
  Install a new air filter.
 
  Put the filter cover on.
 
  Reset filter timer after cleaning or changing air filte
r (P. 71).
  
						

							88
Lamp
1.  If you want to replace new lamp, but the projector was just turned off, please let the 
projector cool down and unplug power cord at least 60 minutes.
2.  If the projector is mounted in the ceiling, contact your dealer to repla\
ce the lamp.
Replacing New Lamp
1. Remove the lamp door.
2.  Loosen 2 screws of the lamp holder. Take the handle on the top of the lamp, pull out 
the lamp straight off the projector.
3. Insert new lamp, lock the lamp door firmly with 2 screws.
4. Put the lamp door on.
5. Please reset the lamp timer after replacing lamp. (P.69)
Maintenance of Projector