Brother DCP 310CN User Manual

3 - 12   WALK-UP PHOTOCAPTURE CENTER™
■White Balance
This setting adjusts the hue of the white areas of an image.
Lighting, camera settings and other influences will effect the 
appearance of white. The white areas of a picture may be slightly 
pink, yellow or some other colour. By using this adjustment you 
can correct this effect and bring the white areas back to pure 
white.
■Sharpness
This setting enhances the detail of an image. It is similar to 
adjusting the fine focus on a camera. If the image is...

WALK-UP PHOTOCAPTURE CENTER™   3 - 13
Cropping
If your photo is too long or wide to fit the available space on your 
selected layout, part of the image will be automatically cropped.
The default setting is 
On. If you want to print the whole image, turn 
this setting to 
Off.
1Press Menu.
2Press   or   to select 2.PhotoCapture.
Press 
Set.
3Press   or   to select 6.Cropping.
Press 
Set.
4Press   or   to select Off (or On).
Press 
Set.
5Press Stop/Exit.
////////////////////////////////////////
/...

3 - 14   WALK-UP PHOTOCAPTURE CENTER™
Borderless
This feature expands the printable area to fit the edges of the paper. 
Printing time will be slightly slower.
1Press Menu.
2Press  or  to select 2.PhotoCapture.
Press 
Set.
3Press  or  to select 7.Borderless.
Press 
Set.
4Press  or  to select Off (or On).
Press 
Set.
5Press Stop/Exit.
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while 
you’re using the PhotoCapture Center™, you can easily identify and...

WALK-UP PHOTOCAPTURE CENTER™   3 - 15
Using PhotoCapture Center™ from 
your PC
You can access the media card that is in the media drive (slot) of the 
DCP from your PC.
(See  Using the PhotoCapture Center
™ from your PC  on page 6-1 in 
Software User’s Guide on the CD-ROM or  Using the PhotoCapture 
Center
™ from a Macintosh® (not available for MFC-3240C and 
MFC-5440CN)  on page 8-47 in the Software User’s Guide on the 
CD-ROM.)
Using PhotoCapture Center™ for 
scanning documents
You can scan documents...

4 - 1   IMPORTANT INFORMATION
4
For your safety
To ensure safe operation the supplied three-pin plug supplied must 
be inserted only into a standard three-pin electrical socket that is 
effectively grounded through the normal household wiring.
The fact that the equipment operates satisfactorily does not imply 
that the power is grounded and that the installation is completely 
safe. For your safety, if in any doubt about the effective grounding of 
the power, consult a qualified electrician.
IT power...

IMPORTANT INFORMATION   4 - 2
Important safety instructions
1Read all of these instructions.
2Save them for later reference.
3Follow all warnings and instructions marked on the product.
4Unplug this product from the wall socket before cleaning. Do not 
use liquid or aerosol cleaners. Use a damp cloth for cleaning.
5Do not use this product near water.
6Do not place this product on an unstable cart, stand, or table. 
The product may fall, causing serious damage to the product.
7Slots and openings in the...

4 - 3   IMPORTANT INFORMATION
11Do not place anything in front of the DCP that will block printing. 
Do not place anything in the path of printing.
12Wait until pages have exited the DCP before picking them up.
13Unplug this product from the power socket and refer servicing to 
Authorized Service Personnel under the following conditions: 
■When the power cord is damaged or frayed.
■If liquid has been spilled into the product.
■If the product has been exposed to rain or water.
■If the product does not...

IMPORTANT INFORMATION   4 - 4
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International 
Corporation.
© 2004 Brother Industries, Ltd. All rights reserved.
Windows and Microsoft are registered trademarks of Microsoft in the 
U.S. and other countries.
Macintosh and TrueType are registered trademarks of Apple 
Computer,Inc.
PaperPort and OmniPage OCR...

5 - 1   TROUBLESHOOTING AND ROUTINE MAINTENANCE
5
 
Troubleshooting 
Error messages
As with any sophisticated office product, errors may occur. If this 
happens, your DCP identifies the problem and displays an error 
message. The most common error messages are shown below.
You can correct most problems by yourself. If you need additional 
help, the Brother Solutions Center offers latest FAQs and 
troubleshooting tips.
Visit us at http://solutions.brother.com
.
Troubleshooting and routine 
maintenance...

TROUBLESHOOTING AND ROUTINE MAINTENANCE   5 - 2
Near EmptyOne or more of the ink cartridges are running 
out of ink.Order a new ink cartridge. 
No CartridgeAn ink cartridge is not properly installed. Take out the ink cartridge and put it 
in again seating it properly.
(See Replacing the ink cartridges on 
page 5-20.)
No FileThe media card in the media drive does not 
contain a .JPG file.Reinsert the correct media card.
No Paper FedThe DCP is out of paper. Add paper, and then press Mono 
Start or Colour...