Brother DCP 340CW User Manual

WALK-UP PHOTOCAPTURE CENTER™   3 - 7
Paper Type & Paper Size
6Press   or   to select the type of paper you are using 
(Letter Glossy, 10x15cm Glossy, 13x18cm Glossy, 
A4 Glossy, Letter Plain, A4 Plain, Letter Inkjet, 
A4 Inkjet or 10x15cm Inkjet).
Press 
Set.
If you selected A4 or Letter, go to Step 7.
If you selected another size, go to Step 8.
—OR—
If you have finished choosing settings, press 
Colour Start.
Print Size
7If you selected A4 or Letter, press   or   to select the print 
size (10x8cm,...

3 - 8   WALK-UP PHOTOCAPTURE CENTER™
DPOF printing
DPOF stands for Digital Print Order Format.
Major Digital Camera manufacturers (Canon Inc., Eastman Kodak 
Company, Fuji Photo Film Co. Ltd., Matsushita Electric Industrial Co. 
Ltd. and Sony Corporation.) created this standard to make it easier 
to print images from a digital camera.
If your digital camera supports DPOF printing, you will be able to 
select on the Digital Camera display the images and number of 
copies you want to print.
When the memory...

WALK-UP PHOTOCAPTURE CENTER™   3 - 9
Changing the default settings
You can save the PhotoCapture Center™ settings you use most often 
by setting them as default. These settings will remain until you 
change them again.
Increasing print speed or quality
1Press Menu.
2Press   or   to select 2.PhotoCapture.
Press 
Set.
3Press   or   to select 1.Print Quality.
Press 
Set.
4Press   or   to select Normal or Photo.
Press 
Set.
5Press Stop/Exit.
Setting paper and size
1Press Menu.
2Press   or   to select...

3 - 10   WALK-UP PHOTOCAPTURE CENTER™
Adjusting brightness
1Press Menu.
2Press   or   to select 2.PhotoCapture.
Press 
Set.
3Press   or   to select 3.Brightness.
Press 
Set.
4Press   to make a lighter print.
—OR—
Press   to make a darker print.
Press 
Set.
5Press Stop/Exit.
Adjusting contrast
You can select the contrast setting. More contrast will make an 
image look sharper and more vivid.
1Press Menu.
2Press   or   to select 2.PhotoCapture.
Press 
Set.
3Press   or   to select 4.Contrast.
Press 
Set....

WALK-UP PHOTOCAPTURE CENTER™   3 - 11
Colour enhancement
You can turn on the colour enhancement feature to print more vivid 
images. Printing time will be slower.
1Press Menu.
2Press   or   to select 2.PhotoCapture.
Press 
Set.
3Press   or   to select 5.Color Enhance.
Press 
Set.
4Press   or   to select On.
Press 
Set.
—OR—
Select Off and press 
Set, then go to Step 7.
5Press   or   to select 1.White Balance, 2.Sharpness 
or 3.Color Density.
Press 
Set.
6Press   or   to adjust the degree of setting....

3 - 12   WALK-UP PHOTOCAPTURE CENTER™
Cropping
If your photo is too long or wide to fit the available space on your 
selected layout, part of the image will be automatically cropped.
The default setting is On. If you want to print the whole image, turn 
this setting to Off.
1Press Menu.
2Press   or   to select 2.PhotoCapture.
Press 
Set.
3Press   or   to select 6.Cropping.
Press 
Set.
4Press   or   to select Off (or On).
Press 
Set.
5Press Stop/Exit.
Cropping:On
Cropping:Off
Downloaded from...

WALK-UP PHOTOCAPTURE CENTER™   3 - 13
Borderless
This feature expands the printable area to fit the edges of the paper. 
Printing time will be slightly slower.
1Press Menu.
2Press   or   to select 2.PhotoCapture.
Press 
Set.
3Press   or   to select 7.Borderless.
Press 
Set.
4Press   or   to select Off (or On).
Press 
Set.
5Press Stop/Exit.
Scan to Card 
You can scan black and white and colour documents into a media 
card. Black and white documents will be stored in PDF (*.PDF) or 
TIFF file formats...

3 - 14   WALK-UP PHOTOCAPTURE CENTER™
2Load your document.
3Press (Scan).
4Press   or   to select Scan to Card.
To change quality, press 
Set and go to Step 5.
—OR—
Press 
Mono Start or Colour Start to start scanning without 
changing any settings.
5Press   or   to select the quality you want.
To change the file type, press 
Set and go to Step 6.
—OR—
To start scanning, press 
Mono Start or Colour Start.
6Press   or   to select the file type you want.
Press 
Mono Start or Colour Start to start scanning....

WALK-UP PHOTOCAPTURE CENTER™   3 - 15
Changing the default black & white file format
1Press Menu.
2Press   or   to select 2.PhotoCapture.
Press 
Set.
3Press   or   to select 8.Scan to Card.
Press 
Set.
4Press   or   to select 2.B/W File Type.
Press 
Set.
5Press   or   to select TIFF or PDF.
Press 
Set.
6Press Stop/Exit.
Changing the default colour file format
1Press Menu.
2Press   or   to select 2.PhotoCapture.
Press 
Set.
3Press   or   to select 8.Scan to Card.
Press 
Set.
4Press   or   to select...

3 - 16   WALK-UP PHOTOCAPTURE CENTER™
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while 
you’re using the PhotoCapture Center™, you can easily identify and 
troubleshoot any difficulties.
When an error message appears on the LCD, the machine will beep 
to get your attention.
Media Error
—This message will appear if you insert a media card 
that is either bad or not formatted, or when there is a problem with 
the media drive. To clear this error, take out...