Brother Mfc 8600 12ppm 600dpi Multifunction Laser Fax Printe Owners Manual

							Using Remote Access Code1
Dial your fax number from a fax machine using touch tone.
2
When your machine answers and beeps, immediately enter
your Remote Retrieval Access Code (159    ).
3
Your machine signals the kinds of messages received:
1 long beep — Fax message(s)
No beeps — No messages.
4
After 2 short beeps, enter a command.
5
Press             to reset your machine when you finish.
9
0
6
Hang up.
1
4
Press 
9
7
1
1 long beep — Fax message(s)
No beeps — No messages
CHANGE
 ANSWER
 MODE
Press 
9
8
then for TAD, press
1   .
FAX/TEL (Fax/Telephone), press
2   .
FAX, press      .
3
EXIT REMOTE
 OPERATION
Press 
9 0   .
CHECK 
RECEIVING 
STATUS
REMOTE
RETRIEVAL
ACCESS
CARD
FoldFold
Remote Retrieval Access Card
If you plan to receive fax messages while away
from your machine, carrying the Remote Retrieval
Access Card printed below will serve as a
convenient reminder of the retrieval procedures.
Simply cut out the card and fold it to fit your
wallet or organizer. Keeping it handy will help
you derive the full benefit of your machineÕs
forwarding, paging and remote retrieval features. 
						

							For the FAX, press            ,      ,      .
For the MFC, press             ,     
 ,      ,      .
fax number where you want your fax messages forwarded,
and press            . To retrieve a Memory Status List
to check the new number, after two short beeps
,
press                  . Enter the number of the remote fax
machine, and press            . Program Fax Forwarding Number press      . Enter the new
4
 
9 6 1
 
Turn Fax Storage on
, press
6   .
Turn Fax Storage off
, press
7   .
RETRIEVE A 
FAX
Press 
9
6
then toPrint a Memory Status List, press      .
1
then enter the number of remote fax machine, and press
            . After the beep, hang up and wait.Retrieve all faxes, press      ,
2
then enter the number of remote fax machine, and press
            . After the beep, hang up and wait.Erase all fax messages, press
3   .
Changing Remote Retrieval Access Code1
Function
8
3
Function
1
8
3
2
Enter a three-digit number from 000 to 999.
The      cannot be changed.
3
Press       . 
Set
4
Press         to exit.         
Stop
Remote Commands CHANGE 
PAGING
/FAX FORWARDING 
SETTING
Press            . 
9 5
then to Turn feature off, press
1   .
Select Fax Forwarding, press
2   .
Select Paging, press
3   .
3
2
FoldFold 
						

							UU20860012
Printed in China
These machines are made for use in the USA and CANADA only. We cannot 
recommend using them overseas because it may violate the 
Telecommunications Regulations of that country and the power requirements of 
your Multi-Function Center may not be compatible with the power available in 
foreign countries. Using USA or CANADA models overseas is at your own 
risk and will void your warranty. 
®
Brother International Corporation
100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807–0911  USA
Brother International Corporation (Canada) Ltd.
1 rue Hôtel de Ville,
Dollard-des-Ormeaux, QC, CANADA H9B 3H6
Visit us on the World Wide Web
http://www.brother.com