Candy Cdcp 6e Manual

							Instruction  Manual
Dishwasher
CDCP 6/E
CDCP 6/E-S 
						

							To review the section on troubleshooting Tips
will help you to solve some common problems
by yourself.
NOTE:
Dear Customer,
Please carefully read this manual before using the
dishwasher, it will help you to use and maintain the
dishwasher properly.
Pass it on to any subsequent owner of the appliance.
This manual contains sections on safety Instructions,
Operating Instructions, Installation Instructions and
Troubleshooting Tips etc.
The manufacturer, following a policy of constant
development and updating of the product, may
make modifications without giving prior notice.
Read this Manual
Before Calling for Service
Keep it for refererce in future.
If you can not solve the problems by yourself,
please ask for the help from professional technicians.
Dishwasher Features.................................... ....3
4) Prior to using for the first time.............................4
5) Loading the Dishwasher Basket.........................8
Attention before or after loading the Dishwasher
Baskets...........................................................9
7) Maintenance and cleaning...............................13
Filtering System..............................................13
Caring for the Dishwasher..................... ..........14.
A. Loading the Salt into the Softener...................4
B. Rinse Aid Dispenser......................................5
C. Detergent ....................................................6
Loading the Basket............................................9
Cutlery Basket...............................................10
6) Starting a washing programme.........................11
Wash Cycle Table............................................11
Turning on the Appliance.................................11
Change the Programme.............. .................12....
At the end of the Wash Cycle............................12
8) Installation instruction...................... .............15..8) Installation instruction...................................15..
Positioning the Appliance................... ...........16..
Water Connection.................................. ........16. About Power Connection........................ ........16.
Connection of Drain Hose..................... ..........17.
Start of dishwasher............................. .. .......18.. ..
9) Troubleshooting Tips................................ .....19..9)TroubleshootingTips.....................................19..
Before calling for service........................... ......19.
Error codes.................................... ...............20.
Technical information.............................. ......21..
1) Safety Information...........................................1
2) Disposal..........................................................2
3) Operation Instruction........................................3
Control Panel....................................................3
This user manual shall also be got from the 
manufacturer or responsible vendor. 
						

							1-11-1
This appliance is intended to be used in household and similar 
applications such as:
-staff kitchen areas in shops, offices and other working environments;
-farm houses;
-by clients in hotels, motels and other residential type environments;
-bed and breakfast type environments.
This appliance can be used by children aged from 8 years and above and
 persons with reduced physical, sensory or mental capabilities or lack of 
experience and knowledge if they have been given supervision or 
instruction concerning use of the appliance in a safe way and understand 
the hazards involved. Children shall not play with the appliance. Cleaning 
and user maintenance shall not be made by children without supervision.
For EN60335-1 
This appliance is not intended for use by persons(including children )with 
reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge ,unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible for their safety.
For IEC60335-1 
This appliance is for indoor use only, for household use only. To protect 
against the risk of electrical shock, do not immerse the unit, cord or plug in 
water or other liquid.
Please unplug before cleaning and maintenance the appliance .Use a soft 
cloth moisten with mild soap, and then use a dry cloth to wipe it again .
1.IMPORTANT SAFETY INFORMATION1.IMPORTANT SAFETY INFORMATION
When using your dishwasher, 
follow the precautions listed below:           WARNING!          WARNING!
EARTHING INSTRUCTIONS
This appliance must be earthed. In the event of a malfunction or breakdown, 
earthing  will   reduce  the  risk  of  an electric  shock  by  providing  a  path  of  least
resistance  of  electric  current.  This  appliance  is  equipped  with  a  cord  having  
an  equipment-earthing conductor and a earthing plug. 
The plug must be plugged into an appropriate  outlet that  is  installed  and  
earth ed in  accordance  with all local codes and ordinances.
Improper connection of the equipment-earthing conductor can result 
in the risk of an electric shock. Check with a qualified electrician or service 
representative if you are in doubt whether the appliance is properly earthed.
Do not modify the plug  provided  with  the  appliance; If  it does not fit  the outlet. 
Have a proper outlet installed by a qualified electrician. 
						

							1-21-2
Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
Do not operate your dishwasher unless all enclosu re panels are properly in place. 
Open the door very carefully if the dishwasher is operating, there is a risk of water 
squirting out.
Do not place any heavy objects on or stand on the door when it is open. The 
appliance could tip forward.
When loading items to be washed:
1) Locate sharp items so that they are not likely to damage the door seal; 
2) Warning: Knives and other utensils with sharp points must be loaded in the 
basket with their points down or placed in a horizontal position.
Check that the detergent powder is empty after completion of the wash cycle.
Do not wash plastic items unless they are marked dishwasher  safe  or  the  
equivalent. For  plastic  it ems n     check th e m anufacturer's  
ot so marked,   
recommendations.
Use only det ergent and rins e add itives des  igned for  an  aut omatic dish washer.
 
Never use soap, laundry detergent, or hand washing detergent in your dishwasher. 
Children should be supervised to ensure that they do not play with the appliance.
The door should not be left open, since this could increase the risk of tripping. 
If the supply cord is damaged, it must be replaced by the manufacturer or 
its service agent or a similarly qualified person in order to avoid a hazard.
During installation, the power supply must not be excessively or dangerously 
bent or flattened.
Do not tamper with controls.
The appliance is to be connected to the water mains using new hose sets and 
that old hose-sets should not be reused.
The maximum number of  place settings to be washed is 6.
The maximum permissible inlet water pressure is 1MPa.
The minimum permissible inlet water pressure is 0.04MPa.       
						

							   Dispose of the dishwasher packaging material correctly.
All packaging materials can be recycled.
   Plastic parts are marked with the standard international 
abbreviations:
PE          for polyethylene, e.g. sheet wrapping material
PS          for polystyrene, e.g. padding material
POM      polyoxymethylene, e.g. plastic clips
PP          polypropylene, e.g. Salt filler
ABS        Acrylonitrile Butadiene Styrene, e.g. Control Panel  .  
   Packaging material could be dangerous for children!
   For disposing of package and  the appliance please go to a 
recycling centre. Therefore cut off the power supply cable 
and make the door closing device unusable.  
   Cardboard packaging is manufactured from recycled paper 
and should be disposed in the waste paper collection for 
recycling.
   By ensuring this product is disposed of correctly, you will 
help prevent potential negative consequences for the 
environment and human health, which could otherwise be 
caused by inappropriate waste handling of this product.
   For more detailed information about recycling of this 
product, please contact your local city office and your 
household waste disposal service.
   DISPOSAL: Do not dispose this product as unsorted 
municipal waste. Collection of such waste separately for 
special treatment is necessary.
          WARNING!          WARNING!
1-31-3
          Disposal          Disposal 
						

							CompartmentA:CompartmentA:
For each wash cycle.
CompartmentB:
For programs with pre-wash only.
(Follow the user instructions)
Mechanical indicatorC.MechanicalindicatorC.Electric indicator on control panel (if provided). Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.Check the regeneration
salt level
Load the baskets
Select a programme
T urn on the water tap and press the button. The machine will start working
after about 10 seconds.Start/Reset
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid scald,
as the dishes and utensils are still hot and more susceptible to break.
They also could dry better.
Changing the programme
Add forgotten dishes in the
dishwasher.
Scrape off any large food particles. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Close the door,Press the until the selected program lights up.
( See the section entitled )“”program button
Operation instruction
Closethedoor,
When the working cycle is finished, the buzzer of the dishwasher will sound 8 times, then stop.
Turn off the appliance using the button.Power
Since the appliance is standing by, it will power off automaticly after 30 minutes
without any operation.
If the appliance is switched
off during a wash cycle.
Open the door carefully.
Hot steam may escape
when the door is opened!
WARNING!
If the appliance was switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
from the beginning ).
Switch on the appliance
Press the Power switch button to switch on the appliance, Open the door.
1.Press the button to stop the machine.
2.Open the door.
3.Add the forgotten dishes.
4.Close the door, then press the button,  the dishwasher will
start running again after 10  seconds.Start/Reset
Start/Reset
Quick Operation guide
For detailed operating method read the corresponding content on the instruction manual.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If in this case, the detergent
dispenser must be refilled.
2.
3. Select a new program.
4. Restart the dishwasher.Press the Start/Reset button, then press the program button more than 3 seconds to cancel the
running program.
C
AB
CompartmentA:CompartmentA:
With each wash cycle.
CompartmentB:
For programmes with pre-wash only.
(Follow the user instructions!)
Mechanical indicatorC.MechanicalindicatorC.Electric indicator on control panel (if provided). Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.Check the regeneration
salt level
Load the baskets
Select a programme
T urn on the water tap and press the Start/Pause button. The machine will start working
after about 10 seconds. Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better.Unload the appliance, starting from the lower basket.
Changing the programme
Add forgotten dishes in the
dishwasher.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Close the door Press the programme button until the selected programme lights up.
( See the section entitled Operation instruction )，
“”
ClosethedoorPresstheprogrammebuttonuntiltheselectedprogrammelightsup.(SeethesectionentitledOperationinstruction)，“”
When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the Power button.
Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.
If the appliance is switched
off during a wash cycle.
Open the door carefully.
Hot steam may escape
when the door is opened!
WARNING!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance
Press the Power switch button to switch on the appliance, Open the door.
1.Press the start/pause button to stop the machine.
2.Open the door.
3.Add the forgotten dishes.
4.Close the door, then press the  start/pause button, the dishwasher will
start running again  after  10  seconds.
Quick operation guide
For detailed operating method read the corresponding content on the instruction manual.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press theStart/Pause button ,then press the program button more than 3 seconds to cancel therunning programme.
3. Select a new programme.
4. Restart the dishwasher.
C
AB
2
2.
2. Press the Start/Pause button ,then press the program button more than 3 seconds to cancel the 
						

							33.Operation Instruction
3
Dishwasher Features
Control Panel
before using it for the first time.
To get the best performance from your dishwasher, read all operating instructionsIMPORTANT
Filter assembly Detergent DispenserCup Shelf Cutlery BasketRinse Aid Dispenser
Drain pipe connector Inlet pipe connector
Spray Arms
Basket
1Salt Container5
6
7
8
9
10
3
24
Back   View Front  view
910
78
1
2
3
4
5
6
2
36
7
Rinse Aid Warning Light : To be on when the
rinse aid dispenser needs to be refilled.
Washing Program Selector: Press the button
to select wash cycles.
Start/Pause Button: Press this button to start
or pause  the dishwasher, the process pilot
lamp will be blinking when starting.
8
51
2
3
4
6
7
Power Button: To turn on/off the power supply.
Delay Button :Press the button to set delay time.
Delay time:2/4/8 hours option
.
Program indicator light.
Salt Warning Light : To be on when the softener
needs to be refilled.
    2H ->4H->8H->0 
						

							normal for a small amount of water to come out of the salt container. It is
1
2
1. The salt container must only be  refilled when the salt warning light in the control panel comes on.
Depending on how fully the salt dissolves, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the control panel (For some Models),you can judge when to load
the salt into the softener by the cycles that the dishwasher had run.
2.  If there are spills of the salt, a soak or a rapid program should be run to remove the excess salt.
Always use salt intended for use with dishwasher.
The salt container is located beneath the basket and should be filled as follows:
Attention!
Only use salt specifically designed for use in dishwashers! All other types of
salt not specifically designed for use in a dishwasher, especially table salt, will
damage the water softener. in case of damages caused by the use of unsuitable
salt the manufacturer does not give any warranty nor is liable for any caused
damages.
Only fill with salt just before starting one of the complete washing programmes.
This will prevent any grains of salt or salty water, which may have been split,
remaining of the bottom of the machine for any period of time, which may cause
corrosion.
4
A. Loading the Salt Into the Softener
NOTE:
ARemove the basket and then unscrew and remove the cap from the salt container.
BBefore first wash, add 1lt. of water  in the  salt container  of  your  machine.
CPlace the end of the funnel (supplied) into the hole and introduce about 1kg of salt.
DAfter filling the container , screw the cap tightly back clockwise.
EUsually, the salt warning light will be cease to be illuminated within 2-6 days after the salt container has been filled with
salt.
FImmediately after filling the salt into the salt container, a washing programme should be started
Otherwise filter system, pump or other important parts of the machine may be damaged by salty
water. It is out of warranty.(Suggest choose rapid
program).
(Suggest choose rapid
program).
Open
NOTE:If your model have water softener, you may skip this section.no
4. toPrior using for the first time4.toPriorusing for the first time
12
Step 1: Enter the status of salt adjustment
Adjusting Salt Consumption
Close the door, within 60 seconds after power on, press button and hold for 5 seconds,
the machine will enter setting mode.Start/Pause 
						

							There are 6 levels of salt consumption in all.It is recommended to select the level according to below  table:
Step 2: select a certain level of salt consumption
Contact your local water board for information on the hardness of your water supply.Press the Start/pause button to select the proper set according to your local environment,
the sets will change in the following sequence: H1->H2->H3->H4->H5->H6;
Step 3: Exit the status of salt adjustment
Without any  operation in five seconds, the machine will exit from set mode,the machine is into standby status,
1) German degree of measurement for the water hardness
2) millimol, internationel unit for water hardness
*) factory setting
Note:
B. Fill the RinseAid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes. That can leave
spots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher is designed to
use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the
dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.
The volume of the rinse aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
5
Setting on the
water softenerDigital display stalls
1Rapid
2
3
4
5
dH
Water Hardness level
mmol/l1)2)
6
*
0-5 0-0.9
6-11 1.0-2.0
12-17
18-22
23-34
35-45
2.1-3.0
3.1-4.0
4.1-6.1
6.2-8.0
Daily   & Rapid Daily
Glass & Rapid
Glass &  Daily
Glass 
						

							To open the dispenser, turn the cap to the  "open" (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned with  "open" arrow and turning it to the closed (right) arrow.
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are a problem, increase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly or are spotted, adjust the dial to the next
higher number until your dishes are spot-free. The recommended setting is "4".
(Factory value is "4".)
Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish stains on your dishes or a bluish film on glassware or
knife blades.
123
1
2
3
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
3 / 4 f u l l
1 / 2 f u l l
1 / 4 full - Should refill to eliminate spotting
Empty
Adjust lever
(Rinse)Adjust lever(Rinse)
6
C (Rinse-Aid indicator)C
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can judge the amount of rinse-aid by the color
of the optical level indicator located next to the cap. When the rinse-aid container is full, the whole
indicator will be dark. As the rinse-aid diminishes, the size of the dark dot decreases. You should never let
the rinse aid get below 1 / 4 full.C
during the next wash. Don't forget to replace the cap before you close dishwasher door.
Clean up any rinse aid spill during filling with an absorbent cloth to avoid excessive foamingNOTE:
NOTE:
Detergents with have chemical ingredients that are necessary to remove dirt, crush dirt and transport it out of the dishwasher.
Most of the commercial quality detergents are suitable for this purpose.
C. Detergent
"   "
MAX
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
How to fill the Rinse Aid Dispenser