Candy Cy 104 Txt User Instructions

When in transit never rest the porthole against the trolley.
M)N.B!
If the appliance is installed on a carpeted floor ensure that the ventilation holes on the
base of the appliance are not obstructed.
N) The appliance should be lifted by two people.
O) If the appliance is not running properly or breaks down, switch it off, turn off the tap and
do not tamper with the appliance.
Consult only the Authorised Technical Support Service for possible repair and ask them to
use original spare parts.
Failure to...

A quick guide around your Candy Infotext menu:Connect product up to the electric / water supplies and drainage (see pag. 70).
Select any wash programme. After a short time a message will be displayed:
43
WELCOME 
0.00
accurate time can be reset later
COTTON WHITE
HEAVY SOIL
this is displayed if prog. 1 is selected
ADOPT LANGUAGE
ENGLISH
Your washing machine is automatically
set to English. Prior to entering the Infotext pre set, remember time is limited while you decide on your
options (30 sec. /...

When using your new Infotext for the first timeThis machine will operate prior to programming the Infotext set up. However, this machine has
Start Delay and Programme End functions and for these functions to work efficiently the
Infotext set must be programmed. This is a simple operation and special care has been taken
during manufacture to ensure that the user can operate this machine simply and effectively.Programming the machineInfotextneeds to be programmed so that the correct clock setting, language...

Enable Final Beeping
Here you have the option to have a beeping alarm to let you know the wash cycle has finished.
By pressing the (        ) button you can scroll through the “yes” and “no” options.
To enter your selection press the (       ) button and the screen will then move to the next
stage and ask you to “Enable memory”
Enable Memory
This is a useful feature if you frequently wash laundry using the same programme.
Selecting “Enable Memory” will tell the machine to remember the last...

Start/Pause ButtonSTART
To start a programme press this button once. 
The machine will now be sensing the wash load and ask you to please wait.
Example
The Infotext panel will then display the time to complete the programme and then the wash
cycle will commence. Infotext calculates the time to the end of the selected programme based
upon a standard 4 Kg load, during the cycle, Infotext corrects the time to that applicable to the
size and composition of the load.
Example
PAUSE
The programme may be paused...

Crease guard Button The Crease Guard function minimizes creases as much as possible with a uniquely
designed anti-crease system that is tailored to specific fabrics.
MIXED FABRICS- the water is gradually cooled throughout the final two rinses with no
spinning and then a delicate spin assures the maximum relaxation of the fabrics.
DELICATE FABRICS– final two rinses with no spinning and then the fabrics are left in
water until it is time to unload. When you are ready to unload, press the "Crease...

Buttons indicator lightThe indicator light buttons will light when specific options are selected.Display INFOTEXT
Door HandlePress the button inside the door handle to open the door.
Door open:  Aspecial safety device prevents the door from being opened immediately
after the end of the cycle.Wait for 2 minutes after the wash cycle has finished before
opening the door.The display will read “DOOR OPEN” and the door may be opened.
As a safety measure check that there is no water evident in the drum.
53
M...

Programme selectorFor the various types of fabrics and various degrees of dirt
the washing machine has 4 different programme bands
according to: wash cycle, temperature and lenght of cycle
(see table of washing cycle programmes).
1 RESISTANTS FABRICS
The programmes have been designed for a maximum wash and the rinses,
with spin intervals, ensure perfect rinsing. 
The final spin gives more efficient removal of water.
2 MIXED AND SYNTHETIC FABRICS 
The main wash and the rinse gives best results thanks to...

Main wash
Auto half loadThe washing machine is fitted with a self adjusting water level system.
This system enables the machine to use the amount of water needed to wash and rinse the
laundry in relation to the particular load.
This results in a reduction of the water and electricity used, without in any way
compromising the washing and rinsing performance.
In fact the amount of water and electricity used will always be appropriate for the clothes load.
The washing machine automatically ensures excellent...

Selecting the wash programmeRefer to the programme guide to select the most suitable programme.
The programme is selected by turning the programme selector clockwise and aligning the
programme number with the indicator.
Check that the tap is turned on and that the discharge hose is positioned correctly.
Press additional function buttons if you require.
Press the start button, the programme will begin.When the programme has finished–The display will read “DOOR LOCKED-WAIT TO OPEN”.
–After 2 minutes the...