Canon 5d Mark 2 Instruction Manual

							181
You can set the print type, date imprinting, and file No. imprinting. The 
print settings will be applied to all print-ordered images. (They cannot 
be set individually for each image.)
1Select [Print order].
X Under the [ 3] tab, select [ Print 
order], then press < 0>.
2Select [Set up].
  Select [Set up ], then press .
3Set the option as desired.
  Set the [Print type ], [Date ], and [ File 
No. ].
  Select the option, then press < 0>. 
Select the desired setting, then press 
< 0 >.
W Digital Print Order Format (DPOF)
Setting the Printing Options
[Print type][Date][File No.]
COPY  
						

							182
W Digital Print Order Format (DPOF)
4 Exit the setting.
 Press the < 7> button.
X The print order screen will reappear.
  Next, select [Sel.Image], [ Byn ], or 
[All image] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple, thumbnail images are printed on one sheet.
K
LBothPrints both the standard and index prints.
Date On
[On ] imprints the recorded  date on the print.
Off
File numberOn[On ] imprints the file  No. on the print.
Off
  Even if [ Date] and [ File No. ] are set to [ On], the date or fi le No. might not 
be imprinted depending on the pr int type setting and printer model.
  When printing with DP OF, you must use the ca rd whose print order 
specifications have been set. It will  not work if you just extract images 
from the card and try to print them.
  Certain DPOF-compatible printers an d photofinishers might not be able 
to print the images as you specified.  If this happens with your printer, 
refer to the printer’s inst ruction manual. Or check  with your photofinisher 
about compatibility wh en ordering prints.
  Do not insert into the camera a ca rd whose print order was set by a 
different camera and then try to spec ify a print order. The print order may 
not work or may be overwritten. Also , depending on the image type, the 
print order may not be possible.
  Print ordering does not work  with RAW images and movies.
  With [ Index ] prints, both the [ Date] and [ File No. ] cannot be set to [ On] 
at the same time.
COPY  
						

							183
W Digital Print Order Format (DPOF)
 Sel.Image
Select and order images one by one.
Press the  button to display the 
three-image view. To return to the single-
image display, press the < u> button.
After completing the print order, press 
the < M > button to save the print 
order to the card.
[Standard] [Both]
Press < 0> and a print order for 1 copy 
of the displayed image will be placed. 
Then turn the < 5> dial to set the 
number of copies (up to 99) to be printed 
for that image.
[Index]
Press , and the displayed image will 
be included in th e index print. The <
X> 
icon will also appear on the upper left.
  Byn
Select [By n] and select the folder. A prin t order for 1 copy of all the 
images in the folder will be placed.  If you select Clear all and a 
folder, the print order for all the images in the folder will be canceled.
  All image
A print order for 1 copy of all the im ages in the card will be placed. If 
you select Clear all, the print orde r for all the images in the card will 
be canceled.
Print Ordering
QuantityTotal images selected
Index icon
Check mark
 
Note that RAW images and movies will  not be included in the print order 
even if you set “By n” or “All image.”
  When using a PictBridge  printer, print no more than 400 images for one 
print order. If you specify more than  this, all the images might not be 
printed.
COPY  
						

							184
With a PictBridge printer, you can easily 
print images with DPOF.
1Preparing to print.
 See page 172. Follow the “Connecting  the Camera to a Printer” 
procedure up to step 5.
2Under the [3] tab, select [Print order].
3Select [Print].
  [Print] will be displayed only if the camera is connected to the 
printer and printing is possible.
4Set the [Paper settings]. (p.174)
  Set the printing effects (p.176) if necessary.
5Select [OK].
WDirect Printing with DPOF
 Before printing, be sure  to set the paper size.
  Certain printers cannot  imprint the file No.
 
If [Bordered] is set, the date might be imprinted on the border, depending on the printer.  Depending on the printer, th e date might look light if it is imprinted on a 
bright background  or on the border.
 Under [ Adjust levels ], [Manual ] cannot be selected.
  If you stopped the printing and want to resume  printing the remaining 
images, select [Resume ]. Note that printing will not resume if you stop 
the printing and any of the following occurs:
• Before resuming the printing, you  changed the print order or deleted 
print-ordered images.
•
When you set the index, you changed the paper setting before resuming the printing.• When you paused the printing, the  card’s remaining capacity was low.
  If a problem occurs during  printing, see page 180.
COPY  
						

							185
By connecting the camera to a personal computer, you can transfer 
images from the camera’s card by operating the camera. This feature is 
called direct image transfer. Before connecting the camera to a personal computer, be sure 
to install the provided software (EOS DIGITAL Solution Disk 
on CD-ROM) in the personal computer.
For instructions to install the pr ovided software, see the separate 
sheet, CD-ROM Guide.
1Set the camera’s power switch to 
.
2Connect the camera to the 
personal computer.
 Use the interface cable provided with 
the camera.
  When connecting the cable plug to 
the camera’s < D> terminal, the 
cable plug’s < D> icon must face the 
front side of the camera.
  Connect the plug on other end of the 
cable to the personal computer’s 
USB port.
3Set the camera’s power switch to 
.
  When the program selection screen 
appears on the personal computer, 
select [EOS Utility ].
X The [ EOS Utility ] screen will appear 
on the computer, and the direct image 
transfer screen will appear on the 
camera’s LCD monitor.
d  Transferring Images to a Personal Computer
Preparation for Image Transfer
COPY  
						

							186
d Transferring Images to a Personal Computer
The images sent to the personal computer will be saved in the [ My 
Pictures] folder or [ Pictures] folder in subfolders organized according 
to the shooting date.
 All images
This is to transfer all the images in the 
card to the personal computer.
 Select [All images ], then press the 
< l > button.
X The < l> button’s blue lamp will 
blink and the image transfer will start.
X When the image transfer is 
completed, the lamp will stay on.
Transferring Images to a Personal Computer
  If the [ EOS Utility ] screen does not appear, see Software Instruction 
Manual in the CD-ROM.
  Before disconnectin g the cable, turn off the ca mera. Pull out the cable by 
grasping the plug (i nstead of the cord).
 Since movie files are larger than still  photo files, they will take longer to 
transfer.
  During the file transfer, do  not disconnect the cable.
  Shooting will be disabled while the  direct transfer screen is displayed.
COPY  
						

							187
d Transferring Images to a Personal Computer
Options other than [ All images] are explained below. To start the image 
transfer, press the < l> button.
  New images
Images which have not yet been  transferred to the personal 
computer will be selected by  the camera automatically and 
transferred.
  Transfer order images
You select the images and they  are transferred to the personal 
computer in a batch. To se lect the images, see page 188.
  Select & transfer
You select the images individually to be 
transferred. To exit, press the < M> 
button.
  Wallpaper
The image you select and transf er will appear as the personal 
computer’s wallpaper. To exit, press the < M> button.
 If you press  instead of the < l> button, a confirmation dialog 
will appear. Select [ OK], then press  to start the transfer.
  RAW images and movies cannot be transferred as wallpaper.
COPY  
						

							188
d Transferring Images to a Personal Computer
Under the [ 3] tab, you can use 
[Transfer order ] to select the images to 
be transferred to a personal computer.
When you select [ Transfer order 
images ] on page 187, you can transfer 
the images set by  the transfer order.
 Sel.Image
Select and order images  one by one. Press 
 to include the displayed image in the 
transfer order. The  icon will also appear 
on the upper left.  After completing the 
transfer order, press the <
M> button to 
save the transfer order to the card.
  BynSelect [Byn] and select the folder. All the  images in the folder will then 
be included in the transfer order. If  you select Clear all and a folder, the 
transfer order for all the images  in the folder will be canceled.
 All image
When you select All image, all the images in the card will be 
included in the transfer order. If yo u select Clear all, the transfer 
order for all the images in the card will be canceled.
3  Selecting the Images  to be Transferred
Do not put into the came ra any images whose tran sfer order was set by a 
different camera and then  try to specify another transfer order. The images 
in the transfer order mi ght all be overwritten. Al so, depending on the image 
type, the transfer ord er may not be possible.
 For the transfer order, if you select an image captured in the RAW+JPEG 
mode, it will be counted as one image. During the direct image transfer, both 
the RAW and JPEG images will be transfe rred to the personal computer.
 If you want to transfer more than 999  images in one batch, select [All 
images ] on the direct tran sfer screen (p.186).
COPY  
						

							189
Customizing theCamera
With Custom Functions, yo u can change the camera 
functions according to your preference. Also, the 
current camera settings can  be saved under the Mode 
Dial’s < w>, , and < y> positions.
The features explained in th is chapter can be set and 
used in the follow ing shooting modes:  d, s , f , a , 
F .
COPY  
						

							190
1Select [8].
  Turn the < 6> dial to select the [ 8] 
tab.
2Select the group.
  Turn the < 5> dial to select C.Fn I - 
IV, then press < 0>.
3Select the Custom Function 
number.
  Turn the < 5> dial to select the 
Custom Function No., then press 
< 0 >.
4 Change the setting as desired.
  Turn the < 5> dial to select the 
setting (number), then press < 0>.
  Repeat steps 2 to 4 if you want to set 
other Custom Functions.
  At the bottom of the screen, the 
current Custom Function settings are 
indicated below the respective 
function numbers.
5Exit the setting.
 Press the < M> button.
X The screen for step 2 will reappear.
In step 2, select [ Clear all Custom Func. (C.Fn) ] to clear all the 
Custom Function settings.
3  Setting Custom Functions N
Custom Function No.
Clearing All Custom Functions
Even after all the Custom Function s are cleared, the setting for [8C.Fn IV -
5: Focusing Screen ] will remain unchanged.
COPY