Canon 5dsr Manual

61
You can directly select and set the shooting functions displayed on the 
LCD monitor. This is called Quick Control.
The basic operating procedures are the same for the Quick Control 
screen (p.60) and the Custom Quick Control screen (p.427).
1Press the  button ( 7 ).
The Quick Control screen will appear.
2Set the desired functions.
 Use < 9> to select a function.
 The setting of the selected function is 
displayed.
 Turn the < 5> or  dial to 
change the setting.
3Take the picture.
 Press the...

Q Quick Control for Shooting Functions
62
You can customize the layout of the Custom Quick Control screen. This 
feature lets you display and position the shooting functions on the 
Custom Quick Control screen as desired. For details, see page 427.
Settable Functions on Quick Control Screen
Custom Quick Control Screen
Shutter speed (p.206)
AF operation (p.86) White balance correction /White balance bracketing (p.179/180)
Shooting mode* (p.33)
Highlight tone priority* (p.187)
Auto Lighting Optimizer...

63
Q Quick Control for Shooting Functions
 Select a function and press < 0>. 
The function setting screen will 
appear.
 Turn the < 6> or < 5> dial to 
change some of the settings. There 
are also functions that are set by 
pressing the button.
 Press < 0> to finalize the setting and 
return to the previous screen.
 When you select < > (p.413) and 
press the < M> button, the 
previous screen will reappear.
Quick Control Screen
< 0 > 

64
You can set various settings with the menus such as the image-recording quality, date/time, etc.
* Certain menu tabs and menu items are not displayed in the  mode.
3  Menu Operations
A Mode Menu Screen
d/s /f /a /F  Mode Menu Screen
 Quick Control Dial
 button
 Main Dial
LCD monitor
 button
 button
Menu items Menu settings
z: Shooting
5: Set-up
9: My Menu
3: Playback8: Custom Functions
Main tabsSecondary
tabs2
: AF 

65
3 Menu Operations
1Display the menu screen.
Press the < M> button to display 
the menu screen.
2Select a tab.
 Each time you press the  button, 
the main tab will switch.
 Turn the < 6> dial to select a 
secondary tab.
 For example, the [ z5] tab refers to 
the screen displayed when the  z 
(Shooting) tab’s fifth dot “ ” from the 
left is selected.
3Select the desired item.
 Turn the < 5> dial to select the item, 
then press < 0>.
4Select the setting.
 Turn the < 5> dial to select the 
desired...

3 Menu Operations
66
Example: When Multi Shot 
Noise Reduction is set
Dimmed menu items cannot be set. The 
menu item is dimmed if another function 
setting is overriding it.
You can see the overriding function by 
selecting the dimmed menu item and 
pressing .
If you cancel the overriding function’s 
setting, the dimmed menu item will 
become settable.
Dimmed Menu Items
 The explanation of menu functions hereinafter assumes that you have 
pressed the < M> button to display the menu screen.
 You can...

67
If the card is new or was previously formatted by another camera or 
computer, format the card with this camera.
1Select [Format card].
Under the [5 1] tab, select [Format 
card ], then press < 0>.
2Select the card.
 [f] is the CF card, and [g ] is the SD 
card.
 Select the card, then press .
3Select [OK].
The card will be formatted.
 When [g ] is selected, low-level 
formatting is possible (p.68).
For low-level formatting, press the 
< L > button to append [ Low level 
format ] with a checkmark...

Before You Start
68
The card is new.
 The card was formatted by a different camera or a computer.
 The card is full with images or data.
 A card-related error is displayed  (p.487).
Format the card in the following cases:
Low-level FormattingPerform low-level formatting if the SD card’s reading or writing speed 
seems slow or if you want to totally erase all data on the card.
 Since low-level formatting will erase all recordable sectors on the SD card, 
the formatting will take longer than normal...

69
Before You Start
You can prevent the beeper from sounding when focus is achieved or 
during self-timer operation.
1Select [Beep].
Under the [z 1] tab, select [Beep ], 
then press < 0>.
2Select [Disable].
 Select [ Disable], then press < 0>.
 The beeper will not sound.
To save battery power, the camera turns off automatically after a set 
time of idle operation elapses. The default setting is 1 min., but this 
setting can be changed. If you do not want the camera to turn off 
automatically, set this...

Before You Start
70
You can set how long the image is displayed on the LCD monitor just 
after shooting. To keep the image displayed, set [Hold]. To not have the 
image displayed, set [ Off].
1Select [Image review].
Under the [z 1] tab, select [Image 
review ], then press < 0>.
2Set the desired time.
 Select the desired setting, then press 
.
The camera’s shooting function  settings and menu settings can be 
reverted to their defaults.
1Select [Clear all camera settings].
 Under the [5 4] tab, select...