Canon 80d Manual

							361
During playback, you can press the  button to set the following: 
[J: Protect images], [b: Rotate image], [9: Rating], [R: RAW 
image processing], [
U: Creative filters], [S: Resize (JPEG images 
only)], [
N: Cropping (JPEG images only)], [1: Highlight alert], [T: 
AF point display], [e: Image jump w/6], and [q: Send images to 
smartphone
*].
For movies, only the functi ons in bold above can be set.
* Not selectable if [Wi-Fi/NFC] under [51: Wireless communication settings ] is set to [Disable ].
1Press the  button.
During image playback, press the 
 button.
The Quick Control options will 
appear.
2Select a function and set it.
Press the   keys to select a 
function.
The current setting of the selected 
function is displayed at the bottom of 
the screen.
Press the   keys to change 
the setting.
When setting the RAW image 
processing (p.390), Creative filters 
(p.399), Resize (p.395), Cropping 
(p.397), or Send images to 
smartphone, also press <
0> to 
finalize the setting.
Image jump w/6: Set the Rating 
(p.354) by pressing the <
B> 
button.
To cancel, press the  button.
Q  Quick Control for Playback 
						

							Q Quick Control for Playback
362
3Exit the setting.
Press the  button to exit the 
Quick Control screen.
To rotate an image, set [ 51: Auto rotate ] to [OnzD ]. If [ 51: Auto rotate ] 
is set to [ OnD] or [ Off], the [ b Rotate image ] setting will be recorded to 
the image, but the camera will not rotate the image for display.
 Pressing the < Q> button during the index display will switch to the 
single-image display and the Quick Control screen will appear. Pressing 
the < Q> button again will return to the index display.
 For images taken with another camera, the options you can select may 
be restricted. 
						

							363
You can play back movies in the following three ways:By connecting the camera to a TV set 
with HDMI Cable HTC-100, you can play 
back the camera’s movies and still 
photos on the TV set.
You can play back movies on the 
camera’s LCD monitor. You can also edit 
out the movie’s first and last scenes, and 
play back the still photos and movies on 
the card in an automatic slide show.
k Enjoying Movies
Playback on a TV Set(p.373)
Playback on the Camera’s LCD Monitor(p.365-372)
 Since hard disk recorders do not have an HDMI IN terminal, the camera 
cannot be connected to a hard disk recorder with an HDMI cable.
 Even if the camera is connected to a hard disk recorder with a USB 
cable, movies and still photos cannot be played back or saved.
A movie edited with a computer cannot be rewritten to the card and played 
back with the camera. 
						

							k Enjoying Movies
364
The movie files recorded on the card can 
be transferred to a computer and played 
back or edited with pre-installed or 
general-purpose software compatible 
with the movie’s recording format.
Playback and Editing with a Computer
To play back or edit a movie with commercially-available software, use 
software compatible with MOV-format and MP4-format movies. For details 
on commercially-available software, contact the software manufacturer. 
						

							365
1Play back the image.
Press the  button to display an 
image.
2Select a movie.
Turn the  dial to select the 
movie to be played back.
In the single-image display, the 
 icon displayed on the upper 
left of the screen indicates a movie. If 
the movie is a video snapshot, 
<
st> will be displayed.In the index display, perforations at 
the left edge of a thumbnail indicate a 
movie. 
As movies cannot be played 
back from the index display, press 
<
0> to switch to the single-image 
display.
3In the single-image display, press 
< 0>.
The movie playback panel will appear 
at the bottom of the screen.
4Play back the movie.
Select [7] (Play), then press .The movie will start playing back.Press  during playback to 
pause. Press again to resume.
You can adjust the sound volume by 
turning the  dial even during 
movie playback.
For more details on the playback 
procedure, see the next page.
k  Playing Back Movies
Spe aker
 Before listening to a movie’s sound through headphones, turn down the 
volume to prevent hurting your ears.

The camera may not be able to play back movies shot with another camera. 
						

							k Playing Back Movies
366
Movie Playback Panel
* When background music is set, the movie sound will not be played back.
OperationPlayback Description
7 PlayPressing  toggles between play and stop.
8  Slow motion Adjust the slow motion speed by pressing the <
Y> < Z> 
keys. The slow motion speed  is indicated on the upper 
right of the screen.
5  First frame Displays the movie’s first frame.
3  Previous frame Each time you press <
0>, the previous frame is 
displayed. If you hold down < 0>, it will rewind the movie.
6  Next frame Each time you press <
0>, the movie will play frame-by-
frame. If you hold down < 0>, it will fast forward the 
movie.
4  Last frame Displays the movie’s last frame.
v  Background 
music* Plays back a movie with the selected background music 
(p.372).
X  Edit Displays the editing screen (p.367).
Playback position
mm ss Playback time (minutes:seconds)
9  Vo l u m e Turn the <
6> dial to adjust the volume of the built-in 
speaker (p.365).
3 2 Press the <
M> button to return to the single-image 
display.
 With a fully-charged Battery Pack LP-E6N, the continuous playback time 
at room temperature (23°C / 73°F) is approx. 3 hr. 40 min.
 By connecting commercially-available headphones equipped with a 3.5 
mm diameter stereo mini plug to the camera’s headphone terminal 
(p.26), you can listen to the movie’s sound (p.313).
 If you connect the camera to a TV set to play back a movie (p.373), 
adjust the sound volume with the TV set. (Turning the < 6> dial will not 
change the sound volume.) If there is audio feedback, place the camera 
farther away from the TV set or turn down the TV sound volume. 
						

							367
X Editing a Movie’s First and Last Scenes
Ta p  [7] on the center of the 
screen.
The movie will start playing back.
To display the movie playback panel, 
tap  on the upper left of the 
screen.
To pause the movie while it is playing 
back, tap on the screen. The movie 
playback panel will also appear.
Playback with the Touch Screen
X  Editing a Movie’s First and Last Scenes
You can edit out the first and last  scenes of a movie in approx. 1-sec. 
increments.
1On the movie playback screen, 
select [X].
The movie editing panel will be 
displayed at the bottom of the screen.
2Specify the part to be edited out.
Select either [U] (Cut beginning) or 
[
V] (Cut end), then press .
Press the   keys to see the 
previous or next frames. Holding 
down the key will fast forward or fast 
rewind the frames. Turn the <
5> dial 
for frame-by-frame playback.
After deciding which part to edit out, 
press <
0>. The portion highlighted 
in white on the top is what will remain. 
						

							X Editing a Movie’s First and Last Scenes
368
 3Check the edited movie.
Select [7] and press  to play 
back the edited movie.
To change the editing, go back to step 
2.
To cancel the editing, press the 
 button, then select [OK] on 
the confirmation dialog.
4Save the edited movie.
Select [W], then press .
The save screen will appear.
To save it as a new movie, select 
[New file]. To save it and overwrite 
the original movie file, select 
[
Overwrite], then press .On the confirmation dialog, select 
[
OK], then press  to save the 
edited movie and return to the movie 
playback screen.
 Since the editing is performed in ap prox. 1-sec. increments (position 
indicated by [ Z] on the top of the screen), the actual position where the 
movie is edited may differ from the position you specified.
 If the card does not have enough free space, [ New file] will not be 
available.
 When the battery level is low, movie editing is not possible. Use a fully-
charged battery.
 Movies shot with another camera cannot be edited with this camera. 
						

							369
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
Under the [32] tab, select [Slide 
show], then press .
2Select the images to be played 
back.
Press the   keys to select 
the desired option, then press .
All images/Movies/Stills
Press the   keys to select 
one of the following: [jAll images] 
[
kMovies] [zStills]. Then press 
<
0>.
Date/Folder/Rating
Press the   keys to select 
one of the following: [
iDate] 
[nFolder] [9Rating].
When  is highlighted, 
press the <
B> button.Press the   keys to select an 
option, then press <
0>.
3 Slide Show (Auto Playback)
Number of images 
to be played back
[Date][Folder][Rating] 
						

							3 Slide Show (Auto Playback)
370
3Configure [Set up] as desired.
Press the   keys to select 
[
Set up], then press .Set the [Display time], [Repeat] 
(repeated playback), [
Transition 
effect
] (effect when changing 
images), and [Background music] 
for the still photos.
The background music selection 
procedure is explained on page 372.
After selecting the settings, press the 
<
M> button.
ItemPlayback Description
j All images All the still photos and movies on the card will be played 
back.
i Date Still photos and movies taken on the selected shooting date 
will be played back.
n Folder Still photos and movies in the selected folder will be played 
back.
k Movies Only the movies on the card will be played back.
z Stills Only the still photos on  the card will be played back.
9 Rating Only the still photos and movies
 with the selected rating will 
be played back.
[Display time] [Repeat]