Canon camcorder DC220 User Manual

 Connecting to a Computer
External Connections
91
MANUAL TRANSFER OPTIONS
When you select [  SELECT & 
TRANSFER] or [  WALLPAPER] you 
can select the images you want to 
transfer one by one.
1Select ( ) a transfer option and 
press .
2Select ( ) the image you want to 
transfer and press  .
The   button will flash while the 
images are being transferred.
1Select ( ) a transfer option and 
press ( ).
2Select ( ) the image you want to 
transfer and press ( ).
• [ SELECT & TRANSFER]: The 
selected image is...

Connecting to a Printer 92
Erasing All Transfer OrdersConnecting to a Printer
Printing Still Images - Direct Print
The camcorder can be connected to any 
PictBridge compatible printer. From the still 
images on the memory card, you can mark 
in advance the images you want to print and 
set the desired number of copies as a print 
order ( 96).
Canon printers: SELPHY printers of the CP, 
DS and ES series and PIXMA printers 
marked with the PictBridge logo.
Connecting the Camcorder to the Printer
1Insert...

 Connecting to a Printer
External Connections
93
IMPORTANT
   If   continues to flash (for more than 1 
minute) or if   does not appear, the camcorder 
is not correctly connected to the printer. In such 
case, disconnect the USB cable and turn off the 
camcorder and the printer. After a short while, 
turn them on again, set the camcorder to 
 mode and restore the connection.
   During the following operations, even if you 
connect a printer to the camcorder it will not be 
recognized.
- Deleting all...

Connecting to a Printer 94
Options
NOTES
Print setting options and [DEFAULT] settings 
vary depending on the printer model. For 
details, refer to the printer’s instruction manual.
[PAPER]
[ PAPER SIZE]
Available paper sizes vary depending on 
the printer model.
[ PAPER TYPE] 
Select [PHOTO], [FAST PHOTO] or 
[DEFAULT].
[ PAGE LAYOUT]
Select [DEFAULT] or one of the following 
available page layouts.
[BORDERED]: Prints the whole image 
area almost exactly as the recorded still 
image. 
[BORDERLESS]:...

 Connecting to a Printer
External Connections
95
Printing after Changing the Print Settings
1If the joystick guide does not appear 
on screen, press ( ) to display it.
2Push the joystick ( ) toward  .
• The print settings menu appears.
• Depending on the printer, the 
message “BUSY” may appear before 
the camcorder displays the print 
settings menu.
3In the print settings menu, select 
( ,  ) the setting you want to 
change and press  .
4Select ( ) the desired setting 
option and press  .
5Select ( ,  )...

Connecting to a Printer 96
Trimming Settings
Set the paper size and page layout before 
changing the trimming settings.
1In the print settings menu ( 93), 
select ( ,  ) [TRIMMING] and 
press ( ).
The trimming frame appears.
2Change the size of the trimming 
frame.
• Move the zoom lever toward T to 
shrink the frame, and toward W to 
enlarge it. Press ( ) to change the 
orientation of the frame (portrait/
landscape).
• To cancel the trimming settings, 
move the zoom lever toward W until 
the trimming...

 Connecting to a Printer
External Connections
97
FROM THE IMAGE SELECTION SCREEN
1Select ( ) the still image you 
want to mark with a print order.
2Press ( ) to set the print order.
The number of copies appears in 
orange in the box next to the print 
order symbol  .
3Set ( ) the number of copies 
desired and press ( ).
To cancel the print order, set ( ) the 
number of copies to 0.
4Repeat steps 1-3 to mark additional 
images with print orders or press 
 twice to close the menu. 
Erasing All Print...

98Trouble? 
Additional Information 
Trouble?
If you have a problem with your camcorder, refer to this checklist. Consult your dealer 
or a Canon Service Center if the problem persists.
Power Source
Recording/Playback
Troubleshooting
ProblemSolution
• Camcorder will not turn on.
• The camcorder switches off 
by itself.
• The disc compartment cover 
will not open.
• LCD/viewfinder switches on 
and off.Battery pack is exhausted. Replace or charge the battery pack. 23
Attach the battery pack correctly.
The...

 Trouble?99
Additional Information
Recording
Even without a disc loaded, 
when closing the disc 
compartment cover a motor 
sound can be heard.The camcorder is checking if a disc is loaded or not. This is not a 
malfunction.–
The disc cannot be ejected. Turn off the camcorder, disconnect the compact power adapter 
and remove the battery pack. Restore the power supply and try 
again.–
The camcorder has exceeded its operational temperature. Turn 
off the camcorder and let it cool down before resuming use....

100Trouble? 
Playback/Editing
The point where the start/stop 
button was pressed does not 
match the beginning/end of the 
recording.There is a slight interval between pressing the start/stop button 
and the actual start of the recording on the disc. This is not a 
malfunction.–
The recording suddenly stops 
shortly after starting recording.The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If 
the problem persists replace the disc.108
The camcorder has exceeded its operational...