Canon Canoscan Lide220 Quick Start Guide

							Scan Image 1Start Scanning Image 1 Scans the first item.
Scan Image 2Start Scanning Image 2Scans the second item.
Adjust cropping frames You can adjust the scan area in preview.
If no area is specified, the image of the size selected in  Select Output Size will be saved. If an area
is specified, only the image in the cropping frame will be scanned and saved.
Adjusting Cropping Frames in the Image Stitch Window
121
 
						

							SaveSaveSaves the two scanned images as one image.
Cancel Cancels  Stitch scan.
(2) Toolbar You can delete the scanned images or adjust the previewed images.
 (Delete)
Deletes the scanned image.
 (Enlarge/Reduce)
Allows you to enlarge or reduce the preview image.
Left-clicking the Preview area enlarges the displayed image. Right-clicking the Preview area reduces the displayed image.
 (Rotate Left)
Rotates the preview image 90 degrees counter-clockwise.
 (Invert Vertically)
Rotates the preview image 180 degrees.
 (Rotate Right)
Rotates the preview image 90 degrees clockwise.
 (Open Guide)
Opens this page.
(3) Thumbnail View Area Displays the thumbnails of the scanned images. Appears blank if none has been scanned.
(4) Preview Area Displays the scanned images. You can adjust the layout by dragging the scanned image or check the
results of the settings made in "
(1) Settings and Operation Buttons ."
122
 
						

							When no image has been scanned:
After scanning the first item by clicking Start Scanning Image 1:
The image is scanned in the direction specified in Scan Direction, and 2 appears next to it.
After scanning the second item by clicking Start Scanning Image 2:
The two scanned images appear.
Related Topic
Scanning Items Larger than the Platen (Image Stitch)
123
 
						

							Scanning with Application Software that You are Using (ScanGear)
What Is ScanGear (Scanner Driver)?
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
Starting ScanGear (Scanner Driver)
Scanning in Basic Mode
Scanning in Advanced Mode
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
ScanGear (Scanner Driver) Screens
Placing Items (When Scanning from a Computer)
Adjusting Cropping Frames (ScanGear)
General Notes (Scanner Driver)
Updating the ScanGear (Scanner Driver)
124
 
						

							What Is ScanGear (Scanner Driver)?ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the output
size and make image corrections when scanning.
ScanGear can be started from IJ Scan Utility or applications that are compatible with a standard interface
called TWAIN. (ScanGear is a TWAIN-compatible driver.)
What You Can Do with This SoftwareThis software enables you to preview scan results or set document type and output size, etc. whenscanning documents. It is useful when you want to scan in a specific color tone, as it allows you to make
various corrections and adjust brightness, contrast, etc.
Screens There are two modes: Basic Mode and Advanced Mode.
Switch modes by clicking a tab on the upper right of the screen.
Note
•
ScanGear starts in the last used mode.
•
Settings are not retained when you switch modes.
Basic Mode
Use the  Basic Mode  tab to scan easily by following three simple on-screen steps ( 
, , and
 ).
125
 
						

							Advanced ModeUse the  Advanced Mode  tab to specify the color mode, output resolution, image brightness, color tone,
etc. when scanning.
126
 
						

							Scanning with Advanced Settings Using ScanGear (Scanner
Driver)
Starting ScanGear (Scanner Driver)
Scanning in Basic Mode
Scanning in Advanced Mode
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
127
 
						

							Starting ScanGear (Scanner Driver)Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. ScanGear
can be started from IJ Scan Utility or other applications.
Starting IJ Scan Utility
Follow these steps to start ScanGear from IJ Scan Utility.1.
Start IJ Scan Utility.
Refer to "Starting IJ Scan Utility" for your model from Home of the  Online Manual for how to start IJ
Scan Utility.
2.
Click ScanGear in the IJ Scan Utility main screen.
The ScanGear screen appears.
Starting from an Application
Follow these steps (example) to start ScanGear from an application.
The procedure varies depending on the application. For details, refer to the application's manual.
1.
Start the application.
2.
On the menu of the application, select the machine.
3.
Select the command to scan a document.
The ScanGear screen appears.
128
 
						

							Scanning in Basic ModeUse the  Basic Mode  tab to scan easily by following the on-screen steps.
Refer to "
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multiple
documents at one time.
Important
•
The following types of documents may not be scanned correctly. In that case, click  (Thumbnail)
on the Toolbar to switch to whole image view and scan.
•
Photos that have a whitish background
•
Documents printed on white paper, hand-written text, business cards, etc.
•
Thin documents
•
Thick documents
•
The following types of documents may not be scanned correctly.
•
Documents smaller than 1.2 inches (3 cm) square
•
Photos that have been cut to various shapes
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Placing Items (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2.
Set  Select Source  according to the document placed on the Platen .
Note
•
To scan magazines containing many color photos, select  Magazine (Color).
3.
Click Preview .
Preview image appears in the Preview area.
129
 
						

							Note
•
Colors are adjusted based on the document type selected in Select Source.
4.
Set Destination .
5.
Set Output Size  according to purpose.
Output size options vary by the item selected in  Destination.
6.
Adjust the cropping frames (scan areas) as required.
Adjust the size and position of the cropping frames on the preview image.
Adjusting Cropping Frames (ScanGear)
7.
Set  Image corrections  as required.
8.
Click Scan.
Scanning starts.
Note
•
Click  (Information) to open a dialog box in which you can check the current scan settings
(document type, etc.).
•
A response of ScanGear after scanning can be specified in  Status of ScanGear dialog after scanning
on the 
Scan tab  of the  Preferences  dialog box.
Related Topic
Basic Mode Tab
130