Canon cinema EOS C100 Mark II User Manual

151
Selecting a Network Connection
Selecting a Network Connection
You can save up to 5 different network configuration profiles. You can select which one to use depending on 
where you plan to use the camcorder. If you just saved a new network configuration (A150), that network 
configuration will already be automatically selected and this procedure is not required.
1 Open the [Select] submenu.
[w Other Functions] > [Network Settings] > [Connection Settings] 
> [Select]
2 Select the desired configuration...

Changing Network Settings
152
Changing Network Settings
You can edit the settings of the currently selected network configuration profile even after the initial setup. 
Changing settings manually requires more advanced knowledge of Wi-Fi and network settings. Turn off any 
active Wi-Fi functions and wait until the network icons disappear from the screen before starting the procedure.
1 Select the network configuration profile whose settings you want to change (A151).
2 Open the [Edit] submenu.
[wOther...

153
Browser Remote: Controlling the Camcorder from a Network Device
Browser Remote: Controlling the Camcorder from a Network 
Device
After connecting the camcorder to a network, you can control the camcorder remotely from the Web browser of 
a connected network device* using the Browser Remote application. Browser Remote lets you monitor the 
image through live view, start and stop recording and remotely control the shutter speed, gain and other 
settings. You can also check the SD cards, remaining...

Browser Remote: Controlling the Camcorder from a Network Device
154
3 Select [On] and then press the joystick.
•    will appear on the top of the screen. When the icons turn white, the camcorder is ready to accept 
commands from the Browser Remote application.
• With Camera Access Point connections, you need to actively connect the Wi-Fi enabled device to the 
camcorder.
4 Check the camcorder’s IP address on the status screen.
• Press the STATUS button to open the status screens and push the joystick...

155
Browser Remote: Controlling the Camcorder from a Network Device
4 Select the language for Browser Remote.
5 Use the Browser Remote controls to operate the camcorder.
• Descriptions of the controls are given in the following pages. Detailed operation is 
given in each function’s reference page.
6 When you have finished using Browser Remote, on the camcorder set 
[wOther Functions] > [Browser Remote] to [Off] and the press the joystick.
• The network icons will turn yellow and then disappear from the...

Browser Remote: Controlling the Camcorder from a Network Device
156
The [Advanced Control] Screen
When using a computer, tablet and other devices with larger screens, the [Advanced Control] screen offers all 
the controls available for operating the camcorder remotely via Browser Remote. For details, refer to each 
function’s explanation.
* Onscreen display/indication only. The content or value cannot be changed using Browser Remote.
11 10 6789
21 22 2423 1
12
15 13
16
17
18
19
20 14
3 2
4
5
1 Browser...

157
Browser Remote: Controlling the Camcorder from a Network Device
The [Basic Control] Screen
When using a smartphone or other device with a smaller screen, you can use the [Basic Control] screen that 
offers only the most important shooting controls (START/STOP, live view, and focus and aperture adjustment) 
but will fit in the screen without scrolling. For details, refer to each function's explanation.
1 Open the [Basic Control] screen.
From the [Advanced Control] screen press the [Basic Control]...

FTP File Transfer
158
FTP File Transfer
After connecting the camcorder to a network, you can transfer clips and photos from the camcorder to another 
device connected to the network using the FTP protocol. The following explanations assume that the FTP server 
is on, ready and correctly configured.
Preparations
Before you can transfer clips to a connected device, you need to configure the FTP server settings and other 
settings related to the handling of folders and files.
FTP Server Settings
To complete...

159
FTP File Transfer
FTP Transfer Settings
These settings determine the handling of files and folders on the FTP 
server.
1 Open the [Create Folder by Date] submenu.
[w Other Functions] > [Network Settings] > [FTP Transfer Settings] 
> [Create Folder by Date]
2 Select the desired option and then press the joystick.
3 Back in the [FTP Transfer Settings] submenu, select [Same 
Named Files] and then press the joystick.
4 Select the desired option and then press the joystick.
Options
[On]: A new subfolder...

FTP File Transfer
160
5 When the confirmation message appears, press the joystick.
Transferring Multiple Clips or Photos
1 Open the index screen that contains the clips or photos you want 
to transfer (A126).
2 Connect the camcorder to the desired network (A151).
• With Camera Access Point connections, you need to actively 
connect the Wi-Fi enabled device to the camcorder.
3 Open the [FTP Transfer] submenu.
[w Other Functions] > [Clips] or [Photos] > [FTP Transfer]
4 Select [Select] to select which...