Canon Digital IXUS 230 HS User Manual

							Safety Precautions
11
•Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of 
electronic instruments and other devices. Exercise adequate caution when using the 
camera in places where use of electronic devices is restricted, such as inside airplanes 
and medical facilities.
• Do not play the supplied CD-ROM(s) in any CD player that does not support data 
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of 
a CD-ROM played on an audio CD player (music player). Additionally, this could damage 
the speakers.
 CautionDenotes the possibility of injury.
• When holding the camera by the strap, be careful not to bang it, subject it to 
strong impacts or shocks, or let it get caught on other objects.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
• When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
• Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in 
electrical shock, fire, burns or other injuries. 
High temperatures may cause deformation of the camera or battery charger casing.
•The slideshow transition effects may cause discomfort when viewed for 
prolonged periods.
CautionDenotes the possibility of damage to the equipment.
• Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
• When using the camera on a beach or at a windy location, be careful not to allow 
dust or sand to enter the camera.
This may cause the product to malfunction.
 
						

							Safety Precautions
12
•In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the 
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from 
the flash to prevent heat build-up and damage to the unit.
• Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
• Before you discard the battery, cover the terminals with tape or other i\
nsulators.
Contacting other metal materials may lead to fire or explosions.
• Unplug the battery charger from the power outlet after charging is complete, or 
when you are not using it.
• Do not place anything, such as cloth on top of the battery charger while it is 
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, 
resulting in fire.
• Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or 
damage.
• Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
• When putting the camera in your bag, ensure that hard objects do not come into 
contact with the screen.
• Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
 
						

							13
Getting Started
This chapter explains preparations before shooting, how to shoot in 
A  mode, and then how to view and erase the images you take. 
The latter part of this chapter explains how to shoot and view movies 
and transfer images to a computer.
Attaching the Strap/Holding the Camera
• Attach the included strap and wrap it around your wrist to avoid dropping 
the camera during use.
• Keep your arms tight against your body while holding the camera firmly by 
the sides when shooting. Be sure that your fingers do not block the flash.
1
Strap
 
						

							14
Use the included charger to charge the battery. Be sure to charge the battery 
as it is not charged at the time of purchase.
Remove the cover.
Insert the battery.
zAlign the S marks on the battery and 
charger, then insert the battery by sliding it 
in ( ) and down ( ).
Charge the battery.
zFor CB-2LV:  Flip out the plug ( ) and 
plug the charger into a power outlet ( ).
zFor CB-2LVE:  Plug the power cord into 
the charger, then plug the other end into a 
power outlet.
XThe charge lamp lights orange and 
charging starts.
XThe charge lamp will light green when 
charging has finished. Charging takes 
approx. 1 hour and 30 minutes.
Remove the battery.
zUnplug the battery charger from the power 
outlet, then remove the battery by sliding it 
in ( ) and up ( ).
Charging the Battery
CB-2LV
CB-2LVE
To protect the battery and prolong its life, do not charge it for longer than 
24 hours continuously.
 
						

							Charging the Battery
15
Number of Possible Shots/Shooting and Playback Times
*1 The number of shots that can be taken is based on the Camera & Imaging Products Association (CIPA) measurement standard.
*2 Times are based on default settings, starting and stopping shooting, turning the camera on  and off, and operations such as using the zoom.
*3 Times are based on repeatedly shooting until the maximum clip length is reached or recording  stops automatically.
•Under some shooting conditions, the number of possible shots and shooting time may 
be less than mentioned above.
Battery Charge IndicatorAn icon or message will appear on the screen indicating the battery’s charge 
state.
Number of Shots*1Approx. 210
Movie Shooting Time*2Approx. 40 minutes
Continuous 
Shooting*3Approx. 1 hour 10 minutes
Playback Time Approx. 4 hours
DisplaySummary
Sufficient charge.
Slightly depleted, but sufficient.
(Blinking red) Nearly depleted. Charge the battery.
“Change the battery pack.” Depleted. Charge the battery.
What if...
• What if the battery develops a bulge?
This is a normal characteristic of the  battery and does not indicate a problem. 
However, if the battery bu lges to the point where it will no longer fit into the 
camera, please contact a Canon Customer Support Help Desk.
• What if the battery is quickly depleted even after charging?
The battery has reached the end of it s life span. Purchase a new battery.
 
						

							Compatible Memory Cards (Sold Separately)
16
The cards below can be used without restrictions on their capacities.
•SD memory cards*
• SDHC memory cards*
• SDXC memory cards *
• Eye-Fi cards
* This memory card complies wit h SD standards. Some cards may not operate properly 
depending on the brand of card used.
This product is not guaranteed to support Eye-Fi card functions (including 
wireless transfer). In case of an issue with an Eye-Fi card, please check with 
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries 
or regions. Without approval, use of the card is not permitted. If it is unclear 
whether the card has been approved for use in the area, please check with 
the card manufacturer.
Using the battery and charger effectively
• Charge the battery on the day, or  the day before, it will be 
used.
Charged batteries continue to discharge naturally even if 
they are not used.
Attach the cover to a charged battery so that the  S mark is 
visible.
• How to store the battery for long periods:
Deplete and remove the battery from the camera. Attach the terminal cover and 
store the battery. Storing a battery for long periods of time (about a year) without 
depleting it may shorten its life span or affect its performance.
• The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power. 
If the plug does not fit the outlet, use  a commercially available plug adapter. 
Do not use electrical transformers for foreign travel as they will cause damage.
Compatible Memory Cards 
(Sold Separately)
Depending on your computer’s OS version, SDXC memory cards may not 
be recognized even when using a commercially available card reader. Check 
to make sure that your OS supports SDXC memory cards beforehand.
About Eye-Fi Cards
 
						

							17
Insert the included battery and a memory card (sold separately).
Check the card’s write-protect tab.
zIf the memory card has a write-protect tab, 
you will not be able to record images if the 
tab is in the locked position. Slide the tab 
up until you hear a click.
Open the cover.
zSlide the cover ( ) and open it ( ).
Insert the battery.
zPress the battery lock in the direction of the 
arrow, then insert the battery as shown 
until it locks into place with a click.
zBe sure to insert the battery in the correct 
direction or it will not properly lock into 
place.
Insert the memory card.
zInsert the memory card as shown until it 
locks into place with a click.
zBe sure the memory card is oriented 
correctly. Inserting the memory card in the 
wrong direction could damage the camera.
Inserting the Battery and Memory Card
TerminalsBattery 
Lock
Terminals
 
						

							Inserting the Battery and Memory Card
18
Close the cover.
zClose the cover ( ), and press downward 
as you slide it until it clicks into place ( ).
Remove the battery.
zOpen the cover and press the battery lock 
in the direction of the arrow.
XThe battery will pop up.
Remove the memory card.
zPush the memory card in until you hear a 
click, then slowly release it.
XThe memory card will pop up.
What if [Memory card locked] appears on the screen?
If the write-protect tab is in the locked position, [Memory card locked] will appear 
on the screen and you will not be able to take or erase images.
Removing the Battery and Memory Card
 
						

							Inserting the Battery and Memory Card
19
Number of Shots per Memory Card
•Values are based on the default settings.
• The number of shots that can be taken will vary depending on camera settings, the 
subject and the memory card used.
Memory Card 4GB16GB
Number of Shots Approx. 1231Approx. 5042
Can you check the number of shots that can be taken?
You can check the number of shots that can be 
taken when the camera is in a Shooting mode 
(p. 26).
 
						

							20
The Date/Time settings screen will appear the first time the camera is turned 
on. Since the dates and times recorded into your images are based on these 
settings, be sure to set them.
Turn on the camera.
zPress the ON/OFF button.XThe Date/Time screen will appear.
Set the date and time.
zPress the qr buttons to choose an option.zPress the op  buttons to set a value.zOnce all settings are complete, press the 
m button.
Set the home time zone.
zPress the qr  buttons to choose your 
home time zone.
Complete th e setting.
zPress the m  button to complete the 
setting. After a confirmation screen 
appears, the shooting screen will 
reappear.
zPressing the ON/OFF button will turn off 
the camera.
Setting the Date and Time
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time and the home 
time zone, the Date/Time screen will appear each time you turn on the camera.