Canon Digital Ixus 310 Hs User Guide

							
Quickly Searching Images
121
Searching Images by Scrolling
Dragging across the screen will display images in a line letting you quickly 
search them. You can also jump by the shooting date (Scroll Display).
Choose an image.
zYou can switch between images in single 
image playback by dragging across the 
screen.
Continuously dragging quickly across the 
screen will display the screen on the left 
(Scroll Display).
In this display, drag across the screen to 
choose images.
zTouching the center image restores single 
image playback.
zWhile in Scroll Display, if you quickly drag 
up or down the screen, you can search 
images by the shooting date.
To turn off this effect, touch ø and then  n. Choose [Scroll 
Display] in the  1 tab, then touch  qr to choose [Off].
 
						

							
Quickly Searching Images
122
Viewing Movies Made with Movie Digest
You can select movies made in   mode (p. 67) by date for viewing.
Choose .
zAfter touching  ø, drag the menu 
appearing on the left side of the screen up 
or down to choose  , then touch the 
menu item again.
Choose a movie date.
zTouch a date to choose it.
Play the movie.
zTouch the date chosen in Step 2.XThe movie will play.
 
						

							
123
When there are many images on the memory card, you can filter and display 
them by a specified filter. You can also protect (p. 137) or delete  (p. 139) all 
images at once while filtered.
Choose  ‚.
zTouch  ø, then drag up or down the 
menu to the left to choose  ‚.
Choose a filter.
zTouch an item you want to set.zIf you drag up or down the menu on the 
right, other items will appear.
zTouch the item you chose again to 
complete the setting.
View the filtered images.
zTouch the desired filter, then touch it again 
(except for  ).
XFiltered playback starts and a yellow frame 
appears.
zIf you drag across the screen, only the 
chosen target images will display.
zIf you choose  in Step 2, filtered 
playback will be canceled.
Search filters
Viewing Images in Filtered Playback
Favorites Displays the images tagged as favorites  (p. 141)
Shot Date Displays the images shot on a specified date
My Category Displays the images of a specified category  (p. 143)
Still image/Movie Displays still images, movies or movies made in   mode.
What if you cannot choose a filter?
Filters that do not have any  corresponding images cannot be chosen.
;
 
						

							
Viewing Slideshows
124
You can automatically play back images recorded to a memory card. Each 
image displays for approximately 3 seconds.
Choose ..
zAfter touching  ø, drag the menu 
appearing on the left side of the screen up 
or down to choose  ., then touch the menu 
item again.
Choose a transition effect.
zTouch an effect to choose it.zTouch the menu item again to complete 
the setting.
XThe slideshow will start a few seconds 
after [Loading image...] appears.
zIn filtered playback  (p. 123), only images 
matching a filter play back.
zTouch the screen to stop the slideshow.
Filtered playback
In filtered playback (Step 3), you can view filtered images with “Quickly Searching 
Images”  (p. 120), “Viewing Slideshows”  (p. 124), and “Magnifying Images” 
(p. 127) . You can process all filtered images at once while performing operations 
in “Protecting Images”  (p. 137), “Erasing All Images”  (p. 139), or “Choosing 
Images for Printing (DPOF)”  (p. 159), by choosing all of the filtered images.
However, if you change the category  (p. 143), or edit an image and save it as a 
new image  (p. 145), a message will appear, and filtered playback will cancel.
Viewing Slideshows
•You can switch images if you lightly tap the camera  (p. 29) during a 
slideshow (Active Display).
• The power saving function  (p. 52) does not work during slideshows.
• You can also use Touch Actions to start a slideshow  (p. 131).
 
						

							
Viewing Slideshows
125
Changing Settings
You can set a slideshow to repeat, or change transition effects and the time 
that slideshow images are displayed. You can choose from 6 transition 
effects when switching between images.
Choose [Slideshow].
zTouch ø, then n  to choose the 
1  tab, and touch [Slideshow].
Choose a setting.
zTouch an item, then touch  qr to make the 
setting.
zIf you touch [Start], the slideshow starts 
with your settings.
zTouching the screen during playback will 
restore the menu screen.
You cannot change [Play Time] if  [Bubble] is chosen in [Effect].
 
						

							
126
You can magnify the area of a recorded image that was inside the AF Frame 
to check the focus.
Touch l to switch the focus 
check display  (p. 44).
XA white frame will appear where the AF 
frame was when the focus was set.
XA gray frame will appear on a face 
detected during playback.
XThe area within the orange frame appears 
magnified.
Switch frames.
zTouch the lower right image, or move the 
zoom lever toward  k once.
XThe screen shown on the left will appear.zTouch   to move to a different frame 
when multiple frames appear.
Change the magnification level or 
location.
zMoving the zoom lever, or touching the 
magnified image on the lower right of the 
screen, or   will change the displayed 
magnification rate.
zIf you drag across the image on the lower 
right, you can move the location of the 
displayed area.
zTouching  Ú, or the image in the upper left 
resets the display to Step 1.
Checking the Focus
The focus check display is not available for movies.
 
						

							
127
Magnify an image.
zWhen you touch the screen, the image will 
magnify and   and   will appear.
zIf you keep your finger on the screen, the 
display will continue to zoom on that part of 
the image up to a factor of 10x.
zYou can also zoom in or out on images by 
touching  or .
If you touch and hold   or  , the 
display will continue zoom in or out on the 
image.
zIf you drag across the screen, you can 
move the location of the displayed area.
zTouch Ú to restore single image playback.zYou can also tap the side of the camera 
gently  (p. 29) to switch between images at 
the same zoom factor (Active Display).
Magnifying Images
Approximate Location of 
Displayed Area
• If you move the zoom lever toward  k, the display will zoom in on the 
image and, if you continue  to hold the zoom lever, it will continue to zoom 
in up to a maximum factor of 10x. To zoom out, move the zoom lever 
toward  g, or continue to hold it to return to single image playback.
• Movies cannot be magnified.
 
						

							
128
Grouped images taken in   mode (p. 80) can also be viewed individually.
Choose an image group.
zDrag left or right across the screen to 
choose an image that displays  , then 
touch .
View each image in the group.
zIf you drag left or right across the screen 
only the images in the group will be 
displayed.
zTouch  Ú to exit group playback.
Viewing Each Image in a Group
Group playback
In group playback (Step 2 above), you c an use the FUNC. menu functions that 
appear when you touch  ø, as well as search  (p. 120) and magnify  (p. 127) 
images. You can process all the images in a group at once while performing 
operations in “Protecting Images”  (p. 137), “Erasing All Images”  (p. 139), or 
“Choosing Images f
or Printing (DPOF)”  (p. 159), by choosing a set of grouped 

images.
 
						

							
Viewing Each Image in a Group
129
Ungrouping Images
Grouped images taken in   mode can be ungrouped and viewed 
individually.
Choose [Group Images].
zTouch ø and then  n to choose 
[Group Images] in the  1 tab.
Choose a setting.
zTouch  qr to choose [Off].zTouch  Ú to complete the setting and 
restore single image playback.
XGrouped images taken in   mode are 
ungrouped and appear individually.
zTo regroup the images, follow the steps 
above and select [On].
Grouping cannot be canceled while viewing images individually  (p. 128).
 
						

							
130
The camera will choose four images based on the displayed image.
If you choose one of those images, the camera will select four more images
letting you enjoy playing back images in an unexpected order.
This will work best if you take many shots of various scenes.
Choose .
zTouch ø, then drag up or down the 
screen to choose  .
XFour images will appear as possibilities.
Choose an image.
zTouch the image you want to view next.XThe chosen image will be displayed in the 
middle, and the next four possibilities will 
appear.
zIf you touch the image in the center of the 
screen, it will display full-screen. Touch the 
screen to restore the original display.
zTouch  Ú to return to single image view.
Displaying Various Images (Smart Shuffle)
•Only still images shot with this came ra will play back in Smart Shuffle.
•  is not available in the following situations:
-If there are less than 50 images taken with this camera on the memory card
- If you play back images not supported by Smart Shuffle
- During filtered playback