Canon Digital Ixus 990 Is User Guide

							* Editing
101
Summary for “1 Viewing Movies” (p. 34)
You can trim the beginnings and ends of recorded movies in one-second 
increments.
Select *.
●Follow Steps 1 to 3 on p. 34, select * and 
press the m button.
XThe movie editing panel and the movie 
editing bar will display.
Set the editing range.
●Press the op buttons and select   or 
.
●Press the qr buttons or turn the  dial 
to move  .   will display at each one-
second interval. If you select  , you can 
trim the beginning of the movie from  . If 
you select  , you can trim the end of the 
movie from  . 
Exit
Playback
Slow Motion Playback (you can use the qr buttons to adjust the speed. 
Sound will not play back.)
Display the first frame
Previous frame (Rewind if you hold down the
 m button.)
Next frame (Fast forward if you hold down the
 m button.)
Display the last frame
*Edit (p. 101)
Displays when connected to a PictBridge compliant printer (p. 30). 
Refer to the Personal Printing Guide for details.
* Editing
Movie Editing Bar Movie Editing Panel
 
						

							* Editing
102
XEven if you move  to a point other than a 
 point, only the portion from the nearest 
 to the left will be trimmed when   is 
selected. Only the portion from the 
nearest   to the right will be trimmed 
when   is selected.
XThe section selected with   will be the 
section of the movie that remains after 
editing. 
Check the edited movie.
●Press the op buttons to select  , then 
press the m button. The edited movie will 
play.
●To edit the movie again, repeat Step 2.●To cancel editing, press the op buttons, 
and select  . After pressing the m button, press the qr buttons or turn the  
dial to select [OK], and press the m button.
Save the edited movie.
●Press the op buttons to select  , then 
press the m button.
●Press the qr buttons or turn the  dial 
to select [New File], then press the 
mbutton.
XThe movie will be saved as a new file.
•When [Overwrite] in Step 4 is selected, the unedited movie is overwritten 
with the edited movie, erasing the original movie.
•When there is not enough space left on the memory card, only 
[Overwrite] can be selected.
•If the battery is depleted partway through editing, the edited movie clips 
may not be saved. When editing movies, you should use a fully charged 
battery or the separately sold AC adapter kit (p. 40).
 
						

							103
Using Playback and Other
Functions
The first part of this chapter explains various ways to play back and 
edit images. The latter part explains how to specify images for printing.
•Press the 1 button to select the Playback mode before operating the 
camera.
•It may not be possible to play back or edit images that have been edited 
on a computer, had their file name changed, or have been taken on a 
different camera.
•The edit function (pp. 121 – 125) cannot be used if the memory card 
does not have free space available.
7
 
						

							104
Searching Images Using Index Display
Displaying multiple images at a time lets you quickly find the image you 
want.
Move the zoom lever toward g.
XImages will display in an index.●Move the zoom lever toward g to 
increase the number of images. The 
number of images increases each time 
you move the lever. 
●Move the zoom lever toward k to reduce 
the number of images. The number of 
images will reduce each time you move 
the lever. 
Change the displayed images.
●Turn the  dial to switch to the next set 
of images set in Step 1.
Select an image.
●Press the opqr buttons to select an 
image.
XAn orange frame appears on the selected 
image.
●Press the m button to display the 
selected image by itself.
Quickly Searching Images
 
						

							Quickly Searching Images
105
Searching Images Using the Control Dial
Turn the control dial to quickly search images. You can also jump by the 
shooting date.
Select an image.
●If you set the single image playback and 
turn the  dial quickly, the images will 
display as shown on the left.
●If you press the op buttons, you can 
search images by the shooting date.
●Pressing the m button restores the single 
image playback.
 
						

							106
When there are many images on the memory card, you can filter and display 
them by a specified condition. You can also delete (p. 112) or protect 
(p. 116) all images at once in the filtered condition.
Setting the Conditions
Select .
●Press the m
 button to select  , then 
press the 
m button.
Select a condition.
●Press the op buttons or turn the  dial 
to select a condition, then press the m 
button.
View the filtered images.
●Press the op buttons or turn the  dial 
to select a condition for playback, then 
press the m button.
XFiltered playback starts and a yellow 
frame displays.
●If you press the qr buttons, only the 
images selected in Step 1 will display.
●If you select [All Images] in Step 2, filtered 
playback will be canceled.
Search by  , ;,  and 
Conditions containing no images cannot be selected.
 Viewing Images in Filtered Playback
 Date Displays the images shot on the specified date
; My Category Displays the images of the specified category
 Folder Displays the images in a specified folder
 File Format Displays only still images or movies
What if you can’t select a target?
 
						

							
. Viewing Slideshows
107
You can use the following functions in filt ered playback for processing the filtered 
images at once.
• “/  Erasing Images”  (p. 29), “. Viewing Slideshows”  (p. 107), “:  Protecting 
Images”  (p. 116), “Selecting Images for Printing (DPOF)”  (p. 127)
You can automatically play back images recorded to a memory card. Each 
image displays for approximately 3 seconds.
Select ..
●Press the  m
 button to select  ., then 
press the  m button.
XThe slideshow will start a few seconds 
after [Loading image…] displays.
●In filtered playback 
(p. 106), only images 
in a filtered condition play back.
●You can pause/restart a slideshow by 
pressing the  m button again.
●Press the  n button to stop the 
slideshow.
Filtered Playback
.  Viewing Slideshows
•If you press the  qr buttons or turn the 
 dial during playback, the 
image will switch. If you press and hold down the  qr buttons you can 
fast-forward through images.
• The power saving function does  not work during slideshows (p. 53).
 
						

							. Viewing Slideshows
108
Changing Settings
You can change the time that slideshow images are displayed, transition 
effects and set the slideshow to repeat. You can select from seven transition 
effects when switching between images.
Select [Slideshow].
●Press the n button and select the 1 
tab, then select [Slideshow] and press the 
m button.
Make the setting.
●Press the op buttons or turn the  dial 
to select an item, then press the qr 
buttons to adjust the setting.
●If you select [Start] and press the m 
button, the slideshow starts with your 
settings.
●Pressing the n button restores the 
slideshow screen.
 
						

							109
You can magnify the area of a recorded image that was inside the AF frame 
or the area of a face that was detected to check the focus.
Press the l button, and switch 
to the focus check display (p. 45).
XA white frame will appear where the AF 
frame or face was when the focus was 
set.
XA gray frame will appear on a face 
detected during playback.
XThe area within the orange frame appears 
magnified.
Change the magnification level or 
location.
●Move the zoom lever toward k once.
●Use the zoom lever to change the display 
size, and the opqr buttons to change 
the display position while checking the 
focus.
Switch frames.
●Pressing the m button will switch to a 
different frame.
●Pressing the n button resets the 
display to Step 1.
Checking the Focus
 
						

							110Move the zoom lever toward k.
●The display will zoom in on the image and, 
if you continue to hold the zoom lever, it 
will continue to zoom in up to a factor of 
10x.
●If you press the opqr buttons, you can 
move the location of the displayed area.
●Move the zoom lever toward g to zoom 
out or return to Single Image Playback.
●If you turn the  dial, you can switch 
images in the zoomed state.
You can select from three transition effects when switching between images 
in single image playback.
Select [Transition].
●Press the n button and select the 1 
tab, then select [Transition] and use the 
qr buttons to select a transition effect.
●Press the n button to accept the 
setting.
k Magnifying Images
Approximate Location of 
Displayed Area
+ Changing Image Transitions