Canon Eos Rebel T5 1200 Instruction Manual

							271
External Speedlites
 With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL 
autoflash mode, the flash can be fired at full output only.
Set the camera’s shooting mode to < a> (manual exposure) or 
< f > (aperture-priority AE) and adjust the aperture setting before 
shooting.
  When using a Speedlite that has manual flash mode, shoot in the 
manual flash mode.
Sync Speed
The camera can synchronize with  compact, non-Canon flash units at 
1/200 sec. or slower shutter s peeds. Use a sync speed slower than 
1/200 sec.
Be sure to test the flash unit beforehand to make sure it synchronizes 
properly with the camera.
Canon Speedlites Other Than the EX-series
Using Non-Canon Flash Units
  If the camera is used with a flash unit or flash accessory dedicated to 
another camera brand, the camera may not operate properly and 
malfunction may result.
  Do not attach a high-voltage flash unit on the camera’s hot shoe. It may 
not fire.
COPY  
						

							272
With a commercially-available Eye-Fi card already set up, you can 
automatically transfer c aptured images to a computer or upload them to 
an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. For instructions on 
how to set up and use the Eye-Fi card or to troubleshoot any image 
transfer problems, refer to the Eye-Fi card’s instruction manual or 
contact the card manufacturer.
The camera is not guaranteed to support Eye-Fi card functions 
(including wireless transfer). In case of an issue with an Eye-Fi 
card, please check with the card manufacturer. Also note that 
approval is required to use Eye-Fi cards in many countries or 
regions. Without approval, use of the card is not permitted. If it 
is unclear whether the card has been approved for use in your 
area, please check with the card manufacturer.
1Insert an Eye-Fi card (p.32).
2Select [Eye-Fi settings].
  Under the [5 1] tab, select [ Eye-Fi 
settings ], then press < 0>.
  This menu is displayed only when an 
Eye-Fi card is inserted into the 
camera.
3Enable Eye-Fi transmission.
 Select [Eye-Fi trans.], then press .
 Select [ Enable], then press < 0>.
  If you set [ Disable], automatic 
transmission will not  occur even with 
the Eye-Fi card inserted 
(transmission status icon  I).
4Display the connection information.
  Select [ Connection info.], then press 
< 0 >.
H  Using Eye-Fi Cards
COPY  
						

							273
H Using Eye-Fi Cards
5Check the [Access point SSID:].
 Check that an access point is 
displayed for [ Access point SSID: ].
  You can also check the Eye-Fi card’s 
MAC address and firmware version.
  Press the < M> button three times 
to exit the menu.
6Take the picture.
X The picture is transferred and the 
 icon switches from gray (not 
connected) to one of the icons below.
  For transferred images,  O is 
displayed in the shooting information 
display (p.229).
H(Gray)  Not connected : No connection with access point.
H(Blinking) Connecting...: Connecting to access point.
H(Displayed)  Connected : Connection to access point established.
H( )  Transferring... : Image transfer to access point in progress.
Transmission status icon
Cautions for Using Eye-Fi Cards If “J ” is displayed, an error occurred while retrieving the card 
information. Turn the camera’s power switch off, and on again.
  Even if [ 51: Eye-Fi trans. ] is set to [Disable ], it may still transmit a 
signal. In hospitals, airports, and other places where wireless 
transmissions are prohibited, remove the Eye-Fi card from the camera.
  If the image transfer does not function, check the Eye-Fi card and 
computer settings. For details, refer to the card’s instruction manual.
  Depending on the wireless LAN’s connection conditions, the image 
transfer may take longer or it may be interrupted.
  Because of the transmission function , the Eye-Fi card may become hot.
  The battery power will be consumed faster.
  During the image transfer, auto power off will not take effect.
  If you insert a wireless LAN card other than an Eye-Fi card, [ 51: Eye-Fi 
settings ] will not appear on the menu. Also, the transmission status icon 
< H > will not appear on the LCD monitor.
COPY  
						

							274
o: Set automatically   k: User selectable    : Not selectable/Disabled
*1: The  z icon indicates still photo shooting during movie shooting.
*2: Settable only for manual exposures.
*3: If used during movie shooting, it will switch to <
d>.
*4: If the AF method is  during Live View shooting, the external Speedlite 
will emit the AF-assist beam when necessary.
Function Availability Table According to Shooting Mode
Mode DialBasic ZoneCreative ZonekA7C23456dsfakz*1
All image quality settings selectablekkkkkkkkkkkkk
ISO speed
Automatically set/ISO Autoooooooookkkk kManualkkkk k*2
Maximum for Autokkkk
Picture 
StyleAutomatically set/Autoooooooookkkk kManual selectionkkkk kAmbience-based shotskkkkkkLighting/scene-based shotskkkkBlurring/sharpening the backgroundk
White 
balance
Autoooooooookkkk kPresetkkkk kCustomkkkk kCorrection/BracketingkkkkAuto Lighting Optimizerooooooookkkk kPeripheral illumination correctionkkkkkkkkkkkk kLong exposure noise reductionkkkkHigh ISO speed noise reductionooooooookkkkHighlight tone prioritykkkk k
Color 
spacesRGBooooooookkkkAdobe RGBkkkk
Focusing
One-Shot AFooookkkkd
c
f
*3AI Servo AFokkkkAI Focus AFoookkkkAF point selectionooooooookkkkfAF-assist beamooo*4o*4okkkkManual (MF)kkkkkkkkkkkk k
COPY  
						

							275
Function Availability Table According to Shooting Mode
*5: Settable only for Live View shooting.
*6: Settable only for autoexposures.
Mode DialBasic ZoneCreative ZonekA7C23456dsfakz*1
Metering 
modeEvaluative meteringooooooookkkkMetering mode 
selectionkkkk
Exposure
Program shiftkExposure 
compensationkkkk*6
AEBkkkkAE lockkkkk*6
Depth-of-field 
previewk(C.Fn-9-4)
Drive/
self-timer
Single shootingkkkkkkkkkkoContinuous shootingkkkkkkkj (10 sec.)kkkkkkkkkkkkl  (2 sec.)kkkkq  (Continuous)kkkkkkkkkkkk
Built-in 
flash
Automatic firingokoooFlash on (Fires at 
all times)kkkkk
Flash offokookkkk oRed-eye reductionkkkkkkkkkFE lockkkkkFlash exposure 
compensationkkkk
External 
flashFunction settingskkkkCustom Function 
settingskkkk
Live View shootingkkkkkkkkkkkkAspect ratio*5kkkkQuick Controlkkkkkkkkkkkk kFeature guidekkkkkkkkkkkk k
COPY  
						

							276
System Map
270EX II
ST-E2ST-E3-RT90EX 430EX II
320EX600EX-RT/
600EX
Bundled 
Accessories
Macro Twin Lite  MT-24EX
Macro Ring Lite 
MR-14EX II
Eyepiece Extender  EP-EX15
II
Rubber Frame Ef
E-series Dioptric 
Adjustment Lenses
Wide Strap Eyecup Ef
Angle Finder C
Semi Hard Case  EH22-L/EH24-L
Battery PackLP-E10 Battery Charger
LC-E10 or LC-E10E
Compact Power Adapter 
CA-PS700
DC Coupler  DR-E10
AC Adapter Kit
ACK-E10
Hand Strap E2
COPY  
						

							277
System Map
Remote SwitchRS-60E3
EF-S lenses
EF lenses
HDMI Cable 
HTC-100 (2.9 m/9.5 ft.) TV/Video
PictBridge-compatible printer
Interface Cable
(1.3 m/4.3 ft.)EOS DIGITAL
Solution Disk
Interface Cable IFC-200U/500U (1.9 m/6.2 ft.) / (4.7 m/15.4 ft.)
Windows 8
Windows 7
Windows Vista
Windows XP
Mac OS XComputer
Card slot
USB port
SD/SDHC/SDXC memory card Card reader
*  When using the GP-E2 with this camera, connect it to the camera with the\
 cable provided 
  with the GP-E2.
*  All cable lengths given are approximate figures. TV set/Video
GPS Receiver
GP-E2
COPY  
						

							278
 Shooting 1 (Red)Page
 Shooting 2 (Red)
3 Menu Settings
Viewfinder Shooting an d Live View Shooting
Image quality73/83 /74 /84 /7 a /8 a /b /c /
1 +73 /184
Beep
Enable / Disable180
Release shutter 
without card
Enable / Disable180
Image review time
Off / 2 sec. / 4 sec. / 8 sec. / Hold180
Peripheral illumination 
correctionEnable / Disable120
Red-eye reduction
Disable / Enable102
Flash controlFlash firing / Built-in flash function setting / 
External flash function  setting / External flash 
C.Fn setting / Clear external flash C.Fn setting194
Exposure 
compensation/AEB1/3-stop or 1/2-stop increments, ±5 stops 
(AEB: ±2 stops)11 4
Auto Lighting OptimizerDisable / Low / Standard / High11 9
Metering modeEvaluative metering / Partial metering / 
Center-weighted average metering111
Custom White 
BalanceManual setting of white balance127
White balance shift/
bracketingWB correction: White balance correction
BKT setting: White balance bracketing129
130
Color spacesRGB / Adobe RGB131
Picture Style
D Auto / P Standard /
Q Portrait / R Landscape /
S Neutral /  UFaithful /
VMonochrome / W User Def. 1-391
122
125
Shaded menu options are not displayed in Basic Zone modes.
COPY  
						

							279
3 Menu Settings
 Shooting 3  (Red) Page
 Shooting 4*  (Red) 
* In Basic Zone modes, it will appear as the [ z2] Shooting 2 tab.
 Playback 1  (Blue)
Dust Delete DataObtains data to be used to erase dust spots198
ISO AutoMax.:400 / Max.:800 / Max.:1600 / Max.:3200 / 
Max.:640090
Live View shooting
Enable / Disable135
AF method
FlexiZone - Single / uLive mode / Quick mode142
Grid display
Off / Grid 1 l / Grid 2 m139
Aspect ratio3:2 / 4:3 / 16:9 / 1:1140
Metering timer4 sec. / 8 sec. / 16 sec. / 30 sec. / 1 min. / 
10 min. / 30 min.141
Protect images
Select images / All images in folder / Unprotect 
all images in folder / All images on card / 
Unprotect all images on card225
Rotate image
Rotate images207
Erase images
Select and erase images / All images in folder / 
All images on card227
Print order
Specify images to be printed (DPOF)249
Photobook set-up
Select images / All images in folder / Clear all in 
folder / All images on card / Clear all on card253
Creative filters
Grainy B/W / Soft focus / Fish-eye effect / 
Toy camera effect / Miniature effect234
Resizing
Downsize the image’s pixel count237
COPY  
						

							3 Menu Settings
280
 Playback 2  (Blue)Page
  Set-up 1 (Yellow)
  Set-up 2  (Yellow)
Histogram displayBrightness / RGB231
Image jump with 6
1 image / 10 images / 100 images / Date / 
Folder / Movies / Stills / Rating205
Slide show
Playback description / Display time / Repeat /
Transition effect / Background music218
Rating
[ OFF ] / l  / m  / n  / o  / p208
Control over HDMI
Disable / Enable223
Auto power off
30 sec. / 1 min. / 2 min. / 4 min. / 8 min. / 
15 min. / Disable181
Auto rotate
On z D / On D / Off188
Format card
Initialize and erase data on the card50
File numbering
Continuous / Auto reset / Manual reset184
Select folder
Create and select a folder182
Screen color
Select the shooting settings screen color193
Eye-Fi settings
Appears when an Eye-Fi card (commercially 
available) has been inserted.272
LCD brightness
Seven brightness levels provided181
LCD off/on button
Shutter button / Shutter/DISP / Remains on193
Date/Time/Zone
Date (year, month, day) / Time (hour, min., 
sec.) / Daylight saving time / Time zone37
Language
KSelect the interface language39
Clean manuallyClean image sensor manually200
Feature guide
Enable / Disable53
GPS device settings Settings available when the GPS Receiver GP-
E2 (sold separately) is attached
281
COPY