Home > Canon > Calculator > Canon F789sga User Manual

Canon F789sga User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon F789sga User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							49
    60
    Calculate the Inner Product of Two VectorsExample: Calculate the inner product of Vector A and Vector B. As Vector A = (4,5,-6) and Vector B = (-7,8,9).
    Obtain the Scalar Product of a VectorEach position in the vector is multiplied by a single value, resulting in 
    a vector of the same size.      
       s x VctA(a,b) = VctB(axs, bxs) 
    Example: To Multiply Vector C = (4,5,-6) by 5 
    Display
    Key in operation
    Display
    Key in operationApps
    Apps
    Apps
    Apps
    Apps
    Apps
    Apps 
    						
    							50
    61
    Determine the Absolute Value of a Vector
    Example: Determine the absolute value of the Vector C. When  
                      Vector C = (4,5,-6) and is already created in the calculator. 
    Calculate the Outer Product of Two Vectors
    Example: Calculate the outer product of Vector A and Vector B. As Vector A = (4,5,-6) and Vector B = (-7,8,9).
    !  An error occurs if you try to obtain an inner or outer product of two  vectors whose dimensions are different from each other. 
    Abs
    Display
    Key in operation
    Display
    Key in operation
    Apps
    Apps
    Apps
    Apps
    Apps
    Apps 
    						
    							51
    62
    Example : Based on Vector A=(-1, 0, 1) and Vector B=(1, 2, 0),
                      determine the size of the angle    (angle unit: Deg) and a
       unit 1 vector perpendicular to both A and B.
                             cos   =          , whereas   = cos 
    -1 
                Unit 1 vector perpendicular to both A and B= 
      < Result:                   =(0.666666666, -0.333333333, 0.666666666)\
     >
    Display
    Key in operation
    AbsAbs
    Abs
    Apps
    Apps
    AppsAppsApps
    AppsApps
    AppsApps
    AppsApps 
    						
    							52
    63
    Start? Input the lower limit of X (Default =1).
    End?  Input the upper limit of X (Default = 5).
      *End value must be greater than the start value.
    Step?  Input the increment step (Default =1).
      Input f(x) function to generate the function table for x & f(x).
     Steps to generate a Number Table
      1.  Press               to enter the Table function calculation.
     2.  Function Input screen
        •  Input function with X variable (              ) to generate the  Function Table Result.
        •  All other variables (A, B, C, D, Y) and independent  memory (M) act as the value.
        •  Pol, Rec, Q…r, S,     functions can not be used in the  Function Input screen.
        •  The Function Table Calculation will change X-variable.
      3.  The input the start, end, & step information
        •  Input the value, press         to confirm on the following  screens
        •  Input expression and display result value in following  screens are in Line mode status
      •  There is a maximum of 30 x-values in the function table 
    generation. “Insufficient Error” will be shown if the start, 
    end, step value combination is more than 30 x-values.
    Function (x, y) Table Calculation
    You should input:-
    Display screen
      In the Function Table Result screen, you cannot edit the 
    content, press         to return to the Function Input screen.
    Example :                               to generate the function table for 
                     the range              , incremented in steps of 1.f (x ) = x3+3x22 x
    f(x)=
    f(x)= X
    3+3X2-2X
    Display
    Key in operation
    d
    dx 
    						
    							53
    64
    Replace the battery immediately when the display characters are 
    dim even with a darker LCD display contrast OR when the 
    following message appears on the screen. Turn the calculator off 
    and replace the lithium battery immediately.
    Please replace the lithium battery with the following procedures,
    1.  Press              to power off the calculator.
    2.  Remove the screw that securely fixes the battery cover in place.
    3.  Remove battery cover.
    4.  Remove the old battery with the tip of a ball pen or similar  sharp object.
    5.  Load the new battery with positive “+” side facing up.
    6.  Replace the battery cover, screw, and press        ,     
                     to initialize the calculator.
    Caution:  Risk of explosion if battery is replaced with an 
    incorrect type. Dispose of used battery according to 
    the instructions.
      Electromagnetic interference or electrostatic discharge may  cause the display to malfunction or the contents of the 
    memory to be lost or altered. Should this occur, press        ,  
                                             to restart the calculator.
    Battery Replacement
    !Low Battery 
    Advice and Precautions
    •  This calculator contains precision components such as LSI 
    chips and should not be used in places subject to rapid 
    variations in temperature, excessive humidity, dirt or dust, or 
    exposed to direct sunlight.
    •  The liquid crystal display panel is made of glass and should  not be subjected to excessive pressure.
    •  When cleaning the device, do not use a damp cloth or volatile  liquid such as paint thinner. Instead, use only a soft, dry cloth.
    •  Do not under any circumstances dismantle this device. If you  believe that the calculator is not functioning properly, either 
    bring or mail the device together with the guarantee to a 
    service representative of the Canon Business office.
    •  Never dispose the calculator improperly such as burning; it  can create risks of personal injury or harm. You are suggested 
    to dispose this product according to your national law.
    •  Do replace the battery once every two years even if it is not  used frequently. 
    						
    							54
    65
                                                                            \
      
    Battery Caution!
    •  Keep the battery out of the reach of children. If the battery is 
      swallowed, contact a doctor immediately.
    •  Misuse of the battery may cause leakage, explosion, damages, 
      or personal injury.
    •  Do not recharge or disassemble the battery, it could cause a 
      short circuit.
    •  Never expose the battery to high temperatures, direct heat, or 
      dispose by incineration.
    •  Never leave a dead battery in the calculator as the dead 
      battery may leak and cause damage to the calculator.
    •  Continued use of the calculator in the low battery condition 
      may result in improper operation or the stored memory may 
      be corrupted or lost completely. Keep the written records of 
      important data all the time; and replace the battery as soon as 
     possible.
    Specifications 
    Power Supply  : Solar Cell and Lithium battery (CR2032 x 1)Power Consumption  : DC 3.0V / 0.3mW
    Battery Life  : Approximately 4 years 
        (Based on 1 hour of operation per day)
    Auto power off  : Approx. 7 minutes
    Usable Temperature  : 0° ~ 40°C 
    Size:  171 (L) × 86 (W) × 17.3 (H) mm (with cover) /
      168 (L) × 80 (W) × 13.15 (H) mm (without cover) /
    Weight:  120g (with cover) / 88 g (without cover)
    * Specifications are subject to change without notice.
    E-IE-455
    PRINTED IN CHINA
    CANON ELECTRONIC BUSINESS MACHINES (H.K.) CO., LTD.
    17/F., Tower One, Ever Gain Plaza, 82-100 Container Port Road, 
    Kwai Chung, New Territories, Hong Kong
    CANON MARKETING (MALAYSIA) SDN BHD.
    Block D, Peremba Square, Saujana Resort, Section U2, 
    40150 Shah Alam, Selangor Darul Ehsan, Malaysia
    © CANON ELECTRONIC BUSINESS 
    MACHINES (H.K.) CO., LTD. 2012 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon F789sga User Manual