Canon Fax Jx510p User Guide

							4.Set the stamp details  
If necessary, complete the following settings, and then click OK. 
Place stamp over text  
To print the stamp on the front of the document, check  this check box. 
Note 
The stamp is given priority because the stamp is printed over the document data in the
sections where the stamp and the document data over lap. If the Place stamp over text check
box is unchecked, the stamp is printed behind the d ocument data and may be hidden in the
overlapping sections depending on the application u sed. 
Stamp first page only  
To print the stamp only on the first page, check this check box. 
Define Stamp... button  
To change the stamp text, bitmap, or position, clic k this (refer to Saving a Stamp Setting). You can
select the color of the stamp by clicking Select Co lor..., but the print result will be in monochrome. 
5.Complete the setup  
Click OK on the Page Setup tab. 
W hen you execute print, the data is printed with th e specified stamp. 
Printing a Background 
1.Select the background for which the settings are to be ch anged 
Two bitmap files are pre-registered as samples. 
2.Click Stamp/Background... on the Page Setup tab  
The Stamp/Background dialog box opens. 
3.Select the background  
Check the Background check box, and select a desired background from the list.
The current settings are displayed in the Settings  Preview on the left side of the Page Setup tab. 
4.Set the background details  
If necessary, complete the following settings, and  then click OK. 
Background first page only  
To print the background only on the first page, check t his check box. 
Select Background... button  
To use another bitmap file or change the layout or  density of a background, click this (refer to 
Saving
Image Data to be Used as a Background
). 
5.Complete the setup  
Click OK on the Page Setup tab. 
W hen you execute print, the data is printed with th e specified background. 
Related Topics 
Saving a Stamp Setting
Saving Image Data to be Used as a Background
Стр%из	стр
4!5p>?c8
,
!
 
						

							Page top
Стр%из	стр
4!5p>?c8
,
!
 
						

							On-screen Manual > Various Printing Methods > Stamp/Background Printing > Saving a Stamp Setting 
Saving a Stamp Setting 
This feature is unavailable when the 64-bit printer driver is used. 
You can create and save a new stamp. You can also c hange and register some of the settings of an
existing stamp. Unnecessary stamps can be deleted at any ti me. 
The procedure for registering a new stamp is as follows: 
Registering a New Stamp 
1.Open the printer driver setup window
2.
Click Stamp/Background... on the Page Setup tab 
The Stamp/Background dialog box opens. 
3.Click Define Stamp...  
The Stamp Settings dialog box opens.  Стр%%из	стр
4@
4!5p4!!
    
						

							4.Configure the stamp while viewing the preview window 
Stamp tab  
Select Text, Bitmap, or Date/Time/User Name for Stamp Type. 
For Text registration, the characters must already be entered in Stamp Text. Change the
TrueType Font, Style, Size, and Outline settings, as n ecessary. You can select the color of the
stamp by clicking Select Color..., but the print re sult will be in monochrome. 
For Bitmap, click Select File... and select the bitmap file (.bmp) to be used. Change the
settings of the Size and Transparent white area if  necessary. 
For Date/Time/User Name, the creation date/time and  user name of the printed object are
displayed in Stamp Text. Change the settings of Tru eType Font, Style, Size, and Outline, if
necessary. You can select the color of the stamp by  clicking Select Color..., but the print result
will be in monochrome. 
Important 
Stamp Text appears grayed out and is unavailable if  Date/Time/User Name is selected. 
Placement tab  
Select the stamp position from the Position list. You can  also select Custom from the Position
list and specify coordinates for X-Position and Y-P osition.
You can also change the stamp position by dragging the st amp in the preview window.
To change the stamp position angle, type a value in  the Orientation box directly. 
5.Save the stamp  
Click the Save settings tab and enter a new stamp title in the Title box, and then click Save.
Click OK when the confirmation message appears. 
6.Complete the setup  
Click OK. The Stamp/Background dialog box opens aga in.
The registered title appears in the Stamp list. 
Changing and Registering Some of Stamp Settings 
1.Select the stamp for which the settings are to be c hanged 
Check the Stamp check box in the Stamp/Background d ialog box, and then select the title of the
stamp to be changed from the Stamp list.  Стр%(из	стр
4@
4!5p4!!
  
						

							2.Click Define Stamp...  
The Stamp Settings dialog box opens. 
3.Configure the stamp while viewing the preview window 
4.Save the stamp  
Click Save overwrite on the Save settings tab. 
If you want to save the stamp with a different title, type a new title in the Title box and click Save.
Click OK when the confirmation message appears. 
5.Complete the setup  
Click OK. The Stamp/Background dialog box opens aga in.
The registered title appears in the Stamp list. 
Deleting an Unnecessary Stamp 
1.Click Define Stamp... in the Stamp/Background dialog  box 
The Stamp Settings dialog box opens. 
2.Select the stamp to be deleted  
Select the title of the stamp you want to delete fr om the Stamps list on the Save settings tab. Then
click Delete. 
Click OK when the confirmation message appears. 
3.Complete the setup  
Click OK. The Stamp/Background dialog box opens aga in. 
Page top
Стр%из	стр
4@
4!5p4!!
 
						

							On-screen Manual > Various Printing Methods > Stamp/Background Printing > Saving Image Data to be Used as a
Background 
Saving Image Data to be Used as a Background 
This feature is unavailable when the 64-bit printer  driver is used. 
You can select a bitmap file and save it as a new b ackground. You can also change and register some
of the settings of an existing background. An unnec essary background can be deleted at any time. 
The procedure for registering image data to be used as  a background is as follows: 
Registering Image Data to be Used as a Background 
1.Open the printer driver setup window
2.
Click Stamp/Background... on the Page Setup tab 
The Stamp/Background dialog box opens. 
3.Click Select Background...  
The Background Settings dialog box opens.  Стр%-из	стр
4@
A57!!6,?c8
,
    
						

							4.Select the image data to be registered to the background 
Click Select File.... Select the target image data  (bitmap file), and then click Open. 
5.Specify the following settings while viewing the preview  window 
Layout Method  
Select how the background image data is to be place d.
W hen Custom is selected, you can set coordinates fo r X-Position and Y-Position.
You can also change the background position by drag ging the image in the preview window. 
Intensity  
Set the intensity of the background image data with  the Intensity slider. To lighten the background,
move the slider to the left. To darken the backgrou nd, move the slider to the right. To print the
background at the original bitmap intensity, move t he slider to the rightmost position. 
6.Save the background  
Click the Save settings tab and enter a new stamp t itle in the Title box, and then click Save.
Click OK when the confirmation message appears. 
7.Complete the setup  
Click OK. The Stamp/Background dialog box opens aga in.
The registered title appears in the Background list . 
Changing and Saving Some Background Settings 
1.Select the background for which the settings are to be ch anged 
Check the Background check box in the Stamp/Backgro und dialog box, and then select the title of
the background you want to change from the Backgrou nd list. 
2.Click Select Background...  
The Background Settings dialog box opens. 
3.While viewing the preview, set the items on the Backgrou nd tab 
4.Save the background  
Click Save overwrite on the Save settings tab. If you want to save the background with a different title,
type a new title in the Title box and click Save. 
Click OK when the confirmation message appears.  Стр%.из	стр
4@
A57!!6,?c8
,
  
						

							5.Complete the setup  
Click OK. The Stamp/Background dialog box opens again.
The registered title appears in the Background list . 
Deleting an Unnecessary Background 
1.Click Select Background... in the Stamp/Background dial og box 
The Background Settings dialog box opens. 
2.Select the background to be deleted  
Select the title of the background you want to dele te from the Backgrounds list on the Save settings
tab, and then click Delete. 
Click OK when the confirmation message appears. 
3.Complete the setup  
Click OK. The Stamp/Background dialog box opens aga in. 
Page top
Стр%/из	стр
4@
A57!!6,?c8
,
 
						

							On-screen Manual > Various Printing Methods > Displaying the Print Results before Printing 
Displaying the Print Results before Printing 
You can display and check the print result before printing. 
The procedure for displaying the print result before p rinting is as follows: 
1.Open the printer driver setup window
2.
Set the preview  
Check the Preview before printing check box on the Main  tab. 
3.Complete the setup  
Click OK. 
The Canon IJ Preview will start and the print result will be displayed before printing. 
Related Topic 
Canon IJ Preview
Page top
Стр%	из	стр
7p1
!$
!3!6
						

							On-screen Manual > Various Printing Methods > Setting Paper Dimensions (Custom Size) 
Setting Paper Dimensions (Custom Size) 
You can specify the height and width of paper if its size cannot be selected in Page Size. Such a pape r
size is called a custom size.  
The procedure for specifying a custom size is as fo llows: 
1.Set the custom size in the application software  
On your applications paper size feature, specify your custom size. 
Important 
If the application software that created the docume nt has a function for specifying the height
and width values, use the application software to s et the values. If the application software
does not have such a function or if the document do es not print correctly, use the printer driver
to set the values. 
2.Open the printer driver setup window
3.
Select the paper size  
Select Custom... for Page Size on the Page Setup tab.  
The Custom Paper Size dialog box opens. 
4.Set the custom size in the application software  Стр(из	стр
4!!
p75

BC!54:C