Canon Fax L2000ip User Guide

xi
Illustrations Used in This Manual
Unless otherwise mentioned, illustrations used in this manual are those taken when no optional 
equipment is attached to the FAX-L2000/L2000IP.
 

xii
Legal Notices
Laser Safety
This Product is certificated as a Class I laser product under EN60825-1:1994. This means that 
the Product does not produce hazardous laser radiation.
Since radiation emitted inside the Product is completely confined within protective housings 
and external covers, the laser beam cannot escape from the machine during any phase of user 
operation.
Additional Information
When servicing or adjusting the optical system of the printer, be careful not to place 
screwdrivers or...

xiii
Important Information for Users in the 
United Kingdom
This equipment is intended for connection to analogue two wire public telecommunication 
networks.
Connect the supplied cable to this socket first, then to the telephone line.
This socket is intended for connection of the Canon optional telephone. If required, an 
adapter to connect any piece of approved telecommunications apparatus is available 
from your Canon supplier.
Canon recommend that any additional equipment connected in the...

xiv
 Should this equipment become physically damaged, disconnect immediately from the 
Telecom connection and power source and contact your nearest service agent.
 To relocate this equipment please:
1.Disconnect the equipment from the Telecom connection.
2.Disconnect the equipment from the power source.
3.Reconnect the equipment to the power source.
4.Reconnect the equipment to the Telecom connection.
 If the supply cord of this equipment is damaged, it must be replaced by the special cord (Parts...

xv
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, 
EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT 
LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, 
FITNESS FOR A PARTICULAR PURPOSE OF USE OR AGAINST INFRINGEMENT OF ANY 
PATENT. CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR 
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES...

xvi
Legal Limitations on the Usage of Your 
Product and the Use of Images
Using your product to scan, print or otherwise reproduce certain documents, and the use of 
such images as scanned, printed or otherwise reproduced by your product, may be prohibited 
by law and may result in criminal and/or civil liability. A non-exhaustive list of these documents 
is set forth below. This list is intended to be a guide only. If you are uncertain about the legality 
of using your product to scan, print or...

xvii
 Important Safety Instructions
Please read these Important Safety Instructions thoroughly before operating the machine. As 
these instructions are intended to prevent injury to the user or other persons or destruction of 
property, always pay attention to these instructions. Also, since it may result in unexpected 
accidents or injuries, do not perform any operation unless otherwise specified in the manual. 
Improper operation or use of this machine could result in personal injury and/or damage...

xviii
 Do not install the machine in the following locations:
- A damp or dusty location
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
Power Supply
WA R N I N G
 Do not damage or modify the power cord. Also, do not place heavy objects on the 
power cord, or pull on or excessively bend it, as this could cause electrical damage 
and result in a fire or electrical shock.
 Keep the power cord away...

xix
Handling
WA R N I N G
 Do not attempt to disassemble or modify the machine. There are high-temperature and 
high-voltage components inside the machine which may result in a fire or electrical 
shock.
 If the machine makes strange noises, or gives off smoke, heat, or strange smells, 
immediately disconnect the power cord from the power outlet. Then, contact your 
service representative. Continued use of the machine in this condition may result in a 
fire or electrical shock.
 Do not use highly...

xx
Maintenance and Inspections
WA R N I N G
 When cleaning the machine, disconnect the power cord. Failure to observe these steps 
may result in a fire or electrical shock.
 Disconnect the power cord from the power outlet regularly, and clean the area around 
the base of the power plugs metal pins and the power outlet with a dry cloth to ensure 
that all dust and grime is removed. If the power cord is connected for a long period of 
time in a damp, dusty, or smoky location, dust can build up around the...