Canon Imageclass Mf227dw User Guide

							FT6-0878   (000)
Getting StartedIMPORTANTFor Macintosh users,
please refer to P.13En
Mise en route
IMPORTANTPour les utilisateurs de Macintosh,
reportez-vous à la p.27Fr
Introducción
IMPORTANTEPara usuarios de Macintosh,
consulte la pág.41Es
Introdução
IMPORTANTEPara usuários Macintosh,
por favor consulte a pág.55Pt
 
						

							2
Limited Warranty Notice
Installation Requirements
 
●MF229dw
 
●MF227dw
 
●MF216n
Installing the Printer
14 1/4

(360 mm) 12 1/8

(308 mm)1 3/4

(45 mm)
5(128 mm)
14 1/2(369 mm) 3 7/8(99 mm)
15 3/8
(390 mm)
15 3/8

(390 mm)
14 1/4

(360 mm) 10 5/8"
(270 mm) 1 1/2

(39 mm)
5(128 mm)
14 1/4(362 mm) 4 1/4(106 mm)
14 1/4

(360 mm) 10 5/8

(270 mm)1 1/2

(39 mm)
5(128 mm)
14 1/4(362 mm)
15 3/8

(390 mm)
 
						

							3
Remove all the tape.
1
2
 
						

							4
Installing the Printer
1
2
1
2
1
2
 
						

							5
1
2
 
						

							6
Índice Contenido Table des matières Contents
About the Supplied Manuals .................................................... 8
Navigating the Menu and Text Input Method .................... 8
Connecting the Power Cord and Turning ON 
the Power ........................................................................\
................. 8
Specifying the Initial Settings ................................................... 9
Choosing the Method to Connect the Machine to 
the Computer ........................................................................\
......... 9
Choosing the Method to Connect: 
Via Wireless LAN or Other Method .......................................... 9
Connecting via a Wired LAN ................................................... 10Connecting via a USB Cable ................................................... 10
Connecting via a Wireless LAN 
(MF229dw/MF227dw Only) .................................................... 10
Setting Wireless LAN (MF229dw/MF227dw Only) ......... 11
Setting a Paper Size and Type ................................................ 13
Specifying Initial Fax Settings and Connecting 
a Telephone Cable  ..................................................................... 13
Perform Useful Tasks ................................................................. 14
Clearing Paper Jams .................................................................. 15
Replacing Toner Cartridge ...................................................... 16
A propos des manuels fournis ............................................... 22
Navigation dans le menu et méthode de saisie 
du texte ........................................................................\
.................. 22
Branchement du cordon d’alimentation et mise 
sous tension ........................................................................\
......... 22
Confi  guration des réglages initiaux .................................... 23
Choix de la méthode de connexion de la machine 
à l’ordinateur ........................................................................\
........ 23
Choix de la méthode de connexion : 
Méthode via réseau sans fi l ou autre ................................... 23
Connexion via un réseau fi  laire ............................................. 24 Connexion via un câble USB.........................................\
.......... 24
Connexion via un réseau sans fi
 l (MF229dw/MF227dw 
uniquement) ...........................................................\
..................... 24
Confi  guration du réseau sans fi  l (MF229dw/MF227dw 
uniquement) ...........................................................\
..................... 25
Réglage du format et du type de papier............................ 27
Confi  guration des réglages de fax initiaux et 
connexion d’un câble téléphonique  .................................. 27
Procédures utiles ........................................................................\
 28
Résolution des bourrages papier ......................................... 29
Remplacement de la cartouche d’encre ............................ 30
Acerca de los manuales suministrados .............................. 36
Navegación por el menú y método de introducción 
de texto ........................................................................\
.................. 36
Conexión del cable de alimentación y encendido del 
interruptor de alimentación ................................................... 36
Especifi cación de la confi  guración inicial .......................... 37
Selección del método para conectar el equipo al 
ordenador ................................................................\
..................... 37
Selección del método de conexión: 
A través de LAN inalámbrica u otro método .................... 37
Conexión mediante una red LAN cableada ...................... 38 Conexión con un cable USB.................................................... 38
Conexión mediante una red LAN inalámbrica 
(MF229dw/MF227dw sólo) ..................................................... 38
Confi guración de LAN inalámbrica 
(MF229dw/MF227dw sólo) ..................................................... 39
Ajuste del tamaño y el tipo del papel ................................. 41
Especifi cación de la confi
 guración inicial de fax y 
conexión del cable del teléfono  ........................................... 41
Tareas útiles ........................................................................\
.......... 42
Eliminación de atascos de papel .......................................... 43
Sustitución del cartucho de tóner ........................................ 44
Sobre os manuais fornecidos ................................................. 50
Navegação pelo menu e pelo método de entrada 
de texto ........................................................................\
.................. 50
Como conectar o cabo de alimentação e ligar 
a máquina ........................................................................\
............. 50
Especifi cação das confi  gurações iniciais ............................ 51
Escolha do método de conexão da máquina ao 
computador ..............................................................\
................... 51
Escolher o Método para Conectar: 
Através de LAN sem fi  o ou outro método ......................... 51
Conexão via LAN com fi  o ......................................................... 52 Conexão via cabo USB .............................................................. 52
Conexão via LAN sem fi
 o
(Somente MF229dw/MF227dw) ........................................... 52
Confi  guração da LAN sem fi  o
(Somente  MF229dw/MF227dw) .......................................... 53
Confi  guração do tamanho e do tipo de papel ................ 55
Especifi cação das confi  gurações iniciais do fax e 
conexão do cabo telefônico  .................................................. 55
Tarefas úteis ........................................................................\
.......... 56
Eliminação de obstruções de papel..................................... 57
Substituição do cartucho de toner ...................................... 58
 
						

							7
 
						

							8
En
 Navigating the Menu and Text Input Method
Register Unit Name
 Canon-1A
Apply
A/a/12 Symbol
◀▶

Back #
ClearNumeric keys
About the Supplied Manuals

Getting Started (This manual):
Read this manual fi  rst. This manual 
describes the installation of the 
machine, the settings, and a caution. Be 
sure to read this manual before using 
the machine.
  MF Driver Installation Guide (User 
Software and Manuals DVD-ROM):
Read this manual next. This manual 
describes software installation.
  e-Manual 
(User Software and Manuals DVD-
ROM):
Read the desired chapter to suit your 
needs. The e-Manual is categorized by 
subject to fi nd desired information easily.
Viewing the e-Manual from the DVD-
ROM
1  Insert the User Software and Manuals  DVD-ROM in your computer.
2 Click [Manuals].
3 Click [e-Manual].
   Depending on the operating system you  are using, a security protection message 
appears. 
   If the User Software and Manuals DVD-ROM has been already inserted in your computer 
and [Manuals] is not displayed, remove the 
DVD-ROM and insert it again.
Connecting the Power Cord and Turning ON the Power
OFF
1
2
ON
  Do not connect the USB cable at this time. Connect it when installing software.
Navigating the Menu
Item selection
Tap an item to select it.
Press 
 to return to the previous 
screen. Setting confi
 rmation
Tap the item.
However, when  appears, tap 
.
Text Input Method
Changing entry mode
Tap  to change the entry 
mode. You can also press 
 to change 
the entry mode.
Entry mode Available text
 Uppercase alphabetic letters and 
symbols
 Lowercase alphabetic letters and 
symbols
 Numbers
Entering text, symbols, and numbers
Enter with the numeric keys or 
 .
Moving the cursor (Entering a space)
Tap  or  to move the cursor. To 
enter a space, move the cursor to the 
end of the text, and tap .
Deleting characters
Delete with 
 . Pressing and holding  deletes all characters.
Entry mode:   Entry mode: 
 Entry mode: 

@ . - _ / 1
ABC abc 2
DEF def3
GHI ghi4
JKL jkl5
MNO mno 6
PQRS pqrs 7
TUV tuv 8
WXYZ wxyz 9
(Not available)0
(space) - . * # ! “ , ; : ^ ` _ = / | ‘ 
? $ @ % & +  ˜ ( ) [ ] { } < >  (Not available)
 
						

							9
En
Specifying the Initial Settings
Follow the instructions on the screen, set the language and 
time. For details on navigating the menu and how to input the 
numbers, see “Navigating the Menu and Text Input Method” 
(
  P.8).
Language
 English
 French
 Portuguese
 Spanish
 EnglishCurrent Time Set.08/08 2014 10:00 AM(0:00-12:59)
Apply
Choosing the Method to Connect the 
Machine to the Computer
 
●Connecting via a Wired LANYou can connect the machine to the computer through a 
wired router. Use the LAN cables to connect the machine to 
the wired router (access point).
   Make sure that there is an available port in the router to connect 
the machine and the computer.
   Have a LAN Cable of Category 5 twisted-pair cable or higher ready.
 
●
Connecting via a USB cableYou can connect the machine to the computer using a USB 
cable.
   Make sure that the USB cable you use has the following 
mark.
 
●
Connecting via a Wireless LAN 
(MF229dw/MF227dw Only)
You can connect the machine to the computer through a 
wireless router*. Since it is connected to wireless, no LAN 
cables are needed.
*  A wireless router (access point), which supports IEEE802.11b/g/n, 
is required.
Check if your router has a button
Select from the following two methods depending on the 
router (access point) that you are using.
 
●There is a button.
You can easily setup if your router (access point) 
has a button, and if the mark is on the router. 
 
●There is no button.
If there is no button on your router (access point), you 
may manually select SSID and complete the settings.
NOTE
•  If you are looking to install your new device via a  Wireless Network connection, you can fi  nd a video and 
written guides with step-by-step instruction to assist 
you through the process from the following URL:
www.usa.canon.com/WirelessHelp
Viewing these guides will ensure a smooth setup of the 
device into your existing wireless environment.
Choosing the Method to Connect: 
Via Wireless LAN or Other Method
 
●MF229dw/MF227dw
Do you want to use the
wireless LAN to connect
to the network?
The settings can be
configured later.
Yes NoCurrent Time Set.
 Must rechg. battery
 for 24 hours to save
 time settings. After
 turning main power
1/3
Close  
Ye s
No
There is a button.  Start from step 4 of ”Push Button Mode” (P.11).
There is no button.
  Start from step 4 of ”Setting the Access Point  Manually” (P.11).
Connect to the computer via a wired LAN
  Proceed to “Connecting via a Wired LAN” (P.10).
Connect to the computer via a USB cable
  Proceed to “Connecting via a USB Cable” (P.10).
Connect to the computer via a wireless LAN later
  Proceed to “Connecting via a Wireless LAN  (MF229dw/MF227dw Only)” (P.10).
 
●MF216n
Current Time Set.
 Must rechg. battery
 for 24 hours to save
 time settings. After
 turning main power
1/3
Close
Connect to the computer via a wired 
LAN
  Proceed to “Connecting via a Wired 
LAN” (P.10).
Connect to the computer via a USB 
cable
  Proceed to“Connecting via a USB  Cable” (P.10).
 
						

							10
En
 Connecting via a Wired LAN
Checking Before the Setup
InternetRouter
or
hub
LAN cable
Are the computer and the router (or hub) properly 
connected using a LAN cable?
For more information, see the instruction manual for the 
network device you are using, or contact the networking 
device manufacturer.
Have the network settings on the computer been 
completed?
If the computer is not properly confi  gured, you may not use 
the wired LAN connection even after completing the following 
settings.
NOTE
•  You cannot connect both the wired LAN and wireless  LAN at the same time. In addition, the machine is set to 
the "Wired LAN" by default.
•  When you connect to a network environment that is not  security protected, your personal information could be 
disclosed to third parties. Please use caution.
•  If you connect through a LAN in the offi   ce, contact your 
network administrator.
Connecting via a Wired LAN
1 Connect the LAN cable.
The IP address will be automatically confi  gured in 2 
minutes. If you want to set the IP address manually, see 
the following items.
  e-Manual “Network”  ▶ “Connecting to a Network”  ▶ 
“Setting IP Addresses”
2 Install the driver and software using the User 
Software and Manuals DVD-ROM.
 See “For details on the installation procedures:” (P.13).
 Proceed to “Setting a Paper Size and Type” (P.13).
 Connecting via a USB Cable
Connect the USB cable after installing the MF Drivers and the 
MF Toolbox.
NOTE
•  If you connected the USB cable before installing the MF  drivers, refer to the MF Driver Installation Guide.
1 Install the driver and software using the User 
Software and Manuals DVD-ROM.
 See “For details on the installation procedures:” (P.13).
2 Connect the USB cable.
 Proceed to “Setting a Paper Size and Type” (P.13).
 Connecting via a Wireless LAN 
(MF229dw/MF227dw Only)
Checking Before the Setup
Wireless LAN Router
Internet
Is the computer connected to the router (access point) 
correctly by a LAN cable or wireless LAN?
For more information, see the instruction manual for the 
network device you are using, or contact the networking 
device manufacturer.
Have the network settings on the computer been 
completed?
If the computer is not properly confi  gured, you may not 
use the wireless LAN connection even after completing the 
following settings.