Canon Imageclass Mf4870dn User Guide
Here you can view all the pages of manual Canon Imageclass Mf4870dn User Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 11
11 Connecting the Handset (Option) PrefaceInstalling the Machine 2 1Connecting to a Computer and Installing the Drivers 3 Configuring and Connecting the Fax 4 • MF4890dw • MF4870dn/MF4750 34 7
Page 12
![Page 12
12
Use wireless LAN to
connect computer?
(Can config. later.)
NoYes
Connecting the Power Cord
• Press [◀] or [▶] to move the
cursor to the left and right.
• Press [ ▲] or [▼] to change
the numeric value, or AM/
PM.
The factory default settings for time display is set as 12-Hour.
Current Time Set.
01/01 2012 12:52 AM
(0:00-12:59)
OFF
Do not connect the USB cable.
Connect the cable when installing the software.
Make sure
that the
machine is
turned OFF.
Language
Chinese (Simplified)
Chinese...](http://img.usermanuals.tech/thumb/14/56329/w300_canon_imageclass_mf4870dn-user-guide-11.png "Page 12
12
Use wireless LAN to
connect computer?
(Can config. later.)
NoYes
Connecting the Power Cord
• Press [◀] or [▶] to move the
cursor to the left and right.
• Press [ ▲] or [▼] to change
the numeric value, or AM/
PM.
The factory default settings for time display is set as 12-Hour.
Current Time Set.
01/01 2012 12:52 AM
(0:00-12:59)
OFF
Do not connect the USB cable.
Connect the cable when installing the software.
Make sure
that the
machine is
turned OFF.
Language
Chinese (Simplified)
Chinese...")
12 Use wireless LAN to connect computer? (Can config. later.) NoYes Connecting the Power Cord • Press [◀] or [▶] to move the cursor to the left and right. • Press [ ▲] or [▼] to change the numeric value, or AM/ PM. The factory default settings for time display is set as 12-Hour. Current Time Set. 01/01 2012 12:52 AM (0:00-12:59) OFF Do not connect the USB cable. Connect the cable when installing the software. Make sure that the machine is turned OFF. Language Chinese (Simplified) Chinese...
Page 13
![Page 13
13
Connecting the Power Cord
Connect to the computer
via a wired LAN
Proceed to the next page.
Connect to the computer
via a USB cable
Proceed to the next page.
Do not connect to PC
Proceed to “Con fi guring
the Fax” (P.20).
Confi rm the screen,
and then press [OK].
Connect to the computer via a
wireless LAN immediately.
Proceed to the next step.
Select also when you connect to
the computer via a wireless LAN later.
Start from step 3 on P.4 in the Wireless LAN Setting Guide.Current Time...](http://img.usermanuals.tech/thumb/14/56329/w300_canon_imageclass_mf4870dn-user-guide-12.png "Page 13
13
Connecting the Power Cord
Connect to the computer
via a wired LAN
Proceed to the next page.
Connect to the computer
via a USB cable
Proceed to the next page.
Do not connect to PC
Proceed to “Con fi guring
the Fax” (P.20).
Confi rm the screen,
and then press [OK].
Connect to the computer via a
wireless LAN immediately.
Proceed to the next step.
Select also when you connect to
the computer via a wireless LAN later.
Start from step 3 on P.4 in the Wireless LAN Setting Guide.Current Time...")
13 Connecting the Power Cord Connect to the computer via a wired LAN Proceed to the next page. Connect to the computer via a USB cable Proceed to the next page. Do not connect to PC Proceed to “Con fi guring the Fax” (P.20). Confi rm the screen, and then press [OK]. Connect to the computer via a wireless LAN immediately. Proceed to the next step. Select also when you connect to the computer via a wireless LAN later. Start from step 3 on P.4 in the Wireless LAN Setting Guide.Current Time...
Page 14
14 Connecting to the Computer Check!Choosing the Method to Connect the Machine to the Computer First, you need to decide on the method you would like to connect your machine to the computer. Choose from the following three options. Connecting via a Wired LAN P.15 (MF4890dw/MF4870dn/MF4720w Only) You can connect the machine to the computer through a wired router. Use the LAN cables to connect the machine to the wired router (or hub). Make sure that there is an available port in the router to...
Page 15
15 Connecting to the Computer Are the computer and the router (or hub) properly connected using a LAN cable? For details, see the instruction manual provided with your network device, or contact the manufacturer. Have the network settings on the computer been complete? If the computer is not properly confi gured, you may not use the wired LAN connection even after completing the following settings. NOTE • You cannot connect both the wired LAN and wireless LAN at the same time. • When you...
Page 16
16 Connecting to the Computer 3 Wired LAN Connection Install the software. Install the MF Drivers and the MF Toolbox. Make sure that the machine is turned ON, and log on to Windows as a user with administrative privileges. Shut down all applications that are running. See the e-Manual for details about installation. NOTE • If you are operating in the IPv6 environment, you may not install the software following the procedures below. See “Installing the MF Drivers on the WSD Network” in the e-Manual. •...
Page 17
17 Connecting to the Computer 1 USB Connection Install the software. Install the MF Drivers and the MF Toolbox. Make sure that the machine is turned ON, and log on to Windows as a user with administrative privileges. Shut down all applications that are running. See the e-Manual for details about installation. Do not connect the USB cable yet. Connect the USB cable after installing the MF Drivers and the MF Toolbox. If you already connected the USB cable: Windows 7/8: 0 Disconnect the USB cable...
Page 18
18 Connecting to the Computer Computer connection via the USB is now complete. 2 USB Connection Connect the USB cable. After installing the software, such as MF Driver, connect the USB cable. Make sure the software is installed fi rst. Flat Connector Connect to the computer. Square Connector Connect to the machine. Proceed to P.20 to configure the fax.
Page 19
19Preface Installing the Machine 2 1Connecting to a Computer and Installing the Drivers 3 Configuring and Connecting the Fax 4
Page 20
![Page 20
20
Confi guring the Fax
(MF4890dw/MF4870dn/MF4750 Only)
Set Up 1Register the Fax Number and Unit Name
• Enter the telephone number using the numeric
keys.
• Press [ ▲] or [▼] to highlight , and then
press [OK].
• If you select , the receive mode will be set to .
• To reconfi gure the settings, select [Menu] →
→ .
• Do not operate the machine when this screen appears and proceed to the next page.
• By referring to Entering Text (P.35), enter the unit
name.
• Press [ ▲] or [▼] to highlight ,...](http://img.usermanuals.tech/thumb/14/56329/w300_canon_imageclass_mf4870dn-user-guide-19.png "Page 20
20
Confi guring the Fax
(MF4890dw/MF4870dn/MF4750 Only)
Set Up 1Register the Fax Number and Unit Name
• Enter the telephone number using the numeric
keys.
• Press [ ▲] or [▼] to highlight , and then
press [OK].
• If you select , the receive mode will be set to .
• To reconfi gure the settings, select [Menu] →
→ .
• Do not operate the machine when this screen appears and proceed to the next page.
• By referring to Entering Text (P.35), enter the unit
name.
• Press [ ▲] or [▼] to highlight ,...")
20 Confi guring the Fax (MF4890dw/MF4870dn/MF4750 Only) Set Up 1Register the Fax Number and Unit Name • Enter the telephone number using the numeric keys. • Press [ ▲] or [▼] to highlight , and then press [OK]. • If you select , the receive mode will be set to . • To reconfi gure the settings, select [Menu] → → . • Do not operate the machine when this screen appears and proceed to the next page. • By referring to Entering Text (P.35), enter the unit name. • Press [ ▲] or [▼] to highlight ,...