Canon Imageformula Dr C225 User Guide

51
[Image alignment]
Click [Image alignment] to display.
The preview image or the slider can be used for the straightening and the 
trimming.
In the preview image, drag the Move grip  , the Straighten grip   and/
or the trimming frame directly. To change the extent of the trimmed image, 
drag the Move grip   on the preview.
When adjustment is finished, click the [OK] button. To cancel the 
adjustment, click the [Back] button.
[Rotate]
Click [Rotate] to display.
The scanned image can be rotated in 90...

52
Select document settings
###HOME > Chapter 6 Scanning with CaptureOnTouch > Select 
document settings###
By default, CaptureOnTouch Lite enables the [Full auto] scan setting, 
so scanning is implemented using the scan conditions that match 
the document.
To specify the document size, color mode, and other settings, set the 
desired scan condition by editing the scan mode panel.
Creating new [Select document] panels
Click the [New document] button, and a [New document] panel will be 
added.
Click   to...

53
[Rotate image to match orientation of text]
Check [Enable] on to rotate the image in the same direction with the 
characters.
[Use advanced settings dialog box]
Document scan settings include basic items that are configured in [Scan 
settings], and the settings that are configured in the advanced settings 
dialog box. The settings in the advanced settings dialog box are applied 
for settings other than the basic items.
Enable [Use advanced settings dialog box] to implement advanced 
scanner settings...

54
Setting the output
###HOME > Chapter 6 Scanning with CaptureOnTouch > Setting the 
output###
By default, CaptureOnTouch enables the settings to converts the 
scanned images to PDF file and save to a folder.
To specify the output method and save location, edit the output panel and 
set the desired output.
Create new [Output] panel
Click the [New output] button to add a [New output] panel.
Click   to display the list of panel types. The selected type of the panel is 
created.
Edit [Output] panel
The...

55
Scanning Shortcut setting
###HOME > Chapter 6 Scanning with CaptureOnTouch > Scanning 
Shortcut setting###
By default, CaptureOnTouch Lite enables the [Full auto] scan setting, 
so scanning is implemented using the scan conditions that match 
the document.
To specify combinations of document selection and outputs, you can edit 
the scanning shortcut panel to set the desired scanning shortcut.
Creating new [Scanning Shortcut] panels
There are two ways as described below to create a new Scanning...

56
PDF setting
In [Multi-pdf settings], specify whether to save the scanned images as a multi-
page file ([Save all pages as one file]) or single page files ([Create a file for 
each specified number of pages]).
For [Create file that complies with PDF/A], select [ON].
For [Compression mode] select either [Standard] or [high compression].
If you click the [Compression rate] button, you can specify the compression rate 
in the dialog box that appears.
TIFF setting
In [Multi-tiff settings], specify whether...

57
Environmental Settings
###HOME > Chapter 6 Scanning with CaptureOnTouch > Environmental 
Settings###
To configure the environmental settings of CaptureOnTouch, open 
the [Environmental settings] dialog box.
Click   (CaptureOnTouch icon) in the taskbar, and select [Environmental 
settings] from the menu.
The following describes the setting items of each tab displayed in the 
[Environmental settings] dialog box.
[Basic settings] Tab
On the [Basic settings] tab, configure the following settings.
Launch...

58
[Plugin] Tab
On the [Plugin] tab, confirm the plugins that have been added to 
CaptureOnTouch.
[Setting] button
Displays the detailed information on the selected plugins.
[Enable] [Disable] button
This button is used to toggle between Enable/Disable modes for the plugin 
selected from the plugin list.
If you click the [Disable] button, the following dialog is displayed.
[Maintenance] Tab
On the [Maintenance] tab, you can configure the log settings for the 
maintenance of CaptureOnTouch and initialize...

59
[Initialize]
A confirmation dialog box appears when you click the [Initialize] button.
All CaptureOnTouch data are deleted and returned to the default settings.
Click [Preferences] from the [CaptureOnTouch DR-C225] menu while the 
main screen of CaptureOnTouch is displayed.
The following describes the setting items of each tab displayed in the 
[Environmental Settings] dialog box.
[Basic settings] Tab
On the [Basic settings] tab, configure the following settings.
Launch method setting
By default,...

60
[Maintenance] Tab
On the [Maintenance] tab, configure the following settings.
[Initialize]
Return all settings to their default condition.