Canon Imageformula Dr C225 User Guide
Have a look at the manual Canon Imageformula Dr C225 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
86
Scan Panel
###HOME > Chapter 8 Special Scanning > Scan Panel###
Scan Panel is software for controlling scanning operations such as feeding
documents and stopping scanning when scanning multiple documents
one after the other.
Scan Panel runs when [Feeding Option] is set to [Panel-Feeding] or
[Automatic Feeding] in the settings dialog box of the scanner driver. In this
case, the Scan Panel appears when you are not scanning and the scanner
enters the wait state.
If you place the next document and...](http://img.usermanuals.tech/thumb/14/56346/w64_canon_imageformula_dr-c225-user-guide-85.png "Page 86
86
Scan Panel
###HOME > Chapter 8 Special Scanning > Scan Panel###
Scan Panel is software for controlling scanning operations such as feeding
documents and stopping scanning when scanning multiple documents
one after the other.
Scan Panel runs when [Feeding Option] is set to [Panel-Feeding] or
[Automatic Feeding] in the settings dialog box of the scanner driver. In this
case, the Scan Panel appears when you are not scanning and the scanner
enters the wait state.
If you place the next document and...")
![Page 91
91
Adjusting the Reduction Ratio
###HOME > Chapter 9 Regular Maintenance > Adjusting the Reduction
Ratio###
As the rollers installed in the scanner wear out, scanned images may
become stretched in the vertical direction. If this happens, you can reduce
the amount of stretching of the image by adjusting the reduction ratio.
1Start Windows and log in as a user with administrator privileges.
2Click the Start button, and then click [All Programs], [Canon
DR-C225], and [Canon imageFORMULA Utility]....](http://img.usermanuals.tech/thumb/14/56346/w64_canon_imageformula_dr-c225-user-guide-90.png "Page 91
91
Adjusting the Reduction Ratio
###HOME > Chapter 9 Regular Maintenance > Adjusting the Reduction
Ratio###
As the rollers installed in the scanner wear out, scanned images may
become stretched in the vertical direction. If this happens, you can reduce
the amount of stretching of the image by adjusting the reduction ratio.
1Start Windows and log in as a user with administrator privileges.
2Click the Start button, and then click [All Programs], [Canon
DR-C225], and [Canon imageFORMULA Utility]....")
![Page 92
92
4Click the [Maintenance] tab and then change the value of [Reduction
ratio adjustment].
The adjustment value can be set within the range from -3.0% to 3.0%.
5Click [OK] to close the scanner properties.
1Opens the scanner drivers Detail Settings screen.
See Select document settings on p.52.
This will open the advanced settings dialog box for the scanner.
2Click to display the [Scanner Information] dialog box.
3Click [Maintenance] to display the [Maintenance] dialog box.](http://img.usermanuals.tech/thumb/14/56346/w64_canon_imageformula_dr-c225-user-guide-91.png "Page 92
92
4Click the [Maintenance] tab and then change the value of [Reduction
ratio adjustment].
The adjustment value can be set within the range from -3.0% to 3.0%.
5Click [OK] to close the scanner properties.
1Opens the scanner drivers Detail Settings screen.
See Select document settings on p.52.
This will open the advanced settings dialog box for the scanner.
2Click to display the [Scanner Information] dialog box.
3Click [Maintenance] to display the [Maintenance] dialog box.")
![Page 93
93
4Change the value of [Reduction ratio adjustment].
The adjustment value can be set within the range from -3.0% to 3.0%.
5Click to close the [Maintenance] dialog box.](http://img.usermanuals.tech/thumb/14/56346/w64_canon_imageformula_dr-c225-user-guide-92.png "Page 93
93
4Change the value of [Reduction ratio adjustment].
The adjustment value can be set within the range from -3.0% to 3.0%.
5Click to close the [Maintenance] dialog box.")
91 Adjusting the Reduction Ratio ###HOME > Chapter 9 Regular Maintenance > Adjusting the Reduction Ratio### As the rollers installed in the scanner wear out, scanned images may become stretched in the vertical direction. If this happens, you can reduce the amount of stretching of the image by adjusting the reduction ratio. 1Start Windows and log in as a user with administrator privileges. 2Click the Start button, and then click [All Programs], [Canon DR-C225], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. 3Click [CANON DR-C225 USB] and click [Properties]. Scanner properties are displayed.
92 4Click the [Maintenance] tab and then change the value of [Reduction ratio adjustment]. The adjustment value can be set within the range from -3.0% to 3.0%. 5Click [OK] to close the scanner properties. 1Opens the scanner drivers Detail Settings screen. See Select document settings on p.52. This will open the advanced settings dialog box for the scanner. 2Click to display the [Scanner Information] dialog box. 3Click [Maintenance] to display the [Maintenance] dialog box.
93 4Change the value of [Reduction ratio adjustment]. The adjustment value can be set within the range from -3.0% to 3.0%. 5Click to close the [Maintenance] dialog box.
94 Chapter 10 Replacing Consumable Parts ###HOME > Chapter 10 Replacing Consumable Parts ### When replacing the separation pad, perform the following steps to detach it from and attach it to the unit. When to replace the consumable parts ............................................ 94 Opening and Closing the Front Unit ................................................. 95 Replacing the Feed Roller.................................................................. 96 Replacing the Retard Roller............................................................... 97 Resetting the Counters ...................................................................... 98 Auto Power Off Setting..................................................................... 100 When to replace the consumable parts ###HOME > Chapter 10 Replacing Consumable Parts > When to replace the consumable parts### The two rollers (feed roller and retard roller) installed in the scanner are consumable parts. The feed roller and retard roller wear with scanning. If the feed roller and retard roller are worn, documents may not feed correctly and paper jams or double-feed errors may occur. When more than 100,000 pages have been fed (total number of pages fed by the scanner), a message prompting you to replace the rollers is displayed when the computer is started. If this message begins to be displayed at startup, purchase an exchange roller kit and replace the worn parts with the consumable parts included in the kit (feed roller and retard roller). For details on the exchange roller kit, see Exchange roller kit (product code: 5484B001) on p.113.
95 Furthermore, the counter in the scanner that records the number of pages fed also needs to be reset when you replace the rollers. (Resetting the Counters on p.98)Opening and Closing the Front Unit ###HOME > Chapter 10 Replacing Consumable Parts > Opening and Closing the Front Unit### 1Open the document feed tray. Press the OPEN button and pull open the front unit toward you. The location of each of the consumable parts is shown below.
96 2When closing the front unit, make sure that it is completely closed by gently pressing the left and right until you hear a click. 3Close the document feed tray. Replacing the Feed Roller ###HOME > Chapter 10 Replacing Consumable Parts > Replacing the Feed Roller### 1Open the roller cover. 2Slide the feed roller to the left, and then remove it. 3Install the new feed roller. When installing the feed roller, align the notch on the roller with the shaft of the front unit.
97 4Slide the roller to the right to secure it. 5Close the roller cover. Make sure that it is completely closed by pressing until you hear a click. Replacing the Retard Roller ###HOME > Chapter 10 Replacing Consumable Parts > Replacing the Retard Roller### 1Open the roller cover. 2Remove the retard roller and then install the new retard roller. When installing the retard roller, align the notch on the roller with the shaft of the main unit. 3Close the roller cover. Make sure that it is completely closed by pressing until you hear a click.
98 Resetting the Counters ###HOME > Chapter 10 Replacing Consumable Parts > Resetting the Counters### 1Start Windows and log in as a user with administrator privileges. 2Click the Start button, and then click [All Programs], [Canon DR-C225], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. 3Click [CANON DR-C225 USB] and click [Properties]. The scanner’s properties appear.
99 4Click the [Maintenance] tab, and click [Reset]. The counter for [Current Rollers] resets. 5Click [OK] to close the scanner properties. 1Opens the scanner drivers Detail Settings screen. See Select document settings on p.52. This will open the advanced settings dialog box for the scanner. 2Click to display the [Scanner Information] dialog box. 3Click [Maintenance] to display the [Maintenance] dialog box. 4Click [Reset]. 5Click to close the [Maintenance] dialog box.
100 Auto Power Off Setting ###HOME > Chapter 10 Replacing Consumable Parts > Auto Power Off Setting### The scanner automatically turns off if 4 hours elapse without scanning or another operation being performed. To disable this setting, follow the procedure below. 1Start Windows and log in as a user with administrator privileges. 2Click the Start button, and then click [All Programs], [Canon DR-C225], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. 3Click [CANON DR-C225 USB] and click [Properties]. Scanner properties are displayed. The Auto Power Off setting is only available in Windows.