Canon Imageformula Dr M140 User Guide

11
Setup Guide
9Read the license agreement, and click [Yes] to accept it.
10Click [Next].
11Specify whether to install the plug-in for Microsoft 
SharePoint, and click [Next].
12When CaptureOnTouch installation is complete, click 
[Finish].
13Click [Next].
0-00-DR-M140_RG_UK.book  Page 11  Monday, August 8, 2011  5:15 PM
 

12
14Read the license agreement, and click [I accept the terms 
in the license agreement] and then [Next] if you agree to 
it.
15Click [Next].
16Specify whether to install the plug-in for Microsoft 
SharePoint, and click [Next].
17When CapturePerfect installation is complete, click 
[Finish].
0-00-DR-M140_RG_UK.book  Page 12  Monday, August 8, 2011  5:15 PM
 

13
Setup Guide
18Select the language you want to use, and click [Next].
19Click [Next].
20When the User Manual installation is complete, click 
[Finish].
21Click [Exit] to finish installing the software.
0-00-DR-M140_RG_UK.book  Page 13  Monday, August 8, 2011  5:15 PM
 

14
STEP 3Connecting to a Computer
Connect the scanner to the computer and the power supply.
IMPORTANT
 Do not connect the scanner to the computer before installing the software.
 Before connecting the scanner to the computer, verify that the power of the scanner is OFF.
If the power is ON, turn it OFF.
To the power outletAC adapter (included with the scanner)USB cable (included with the scanner)
0-00-DR-M140_RG_UK.book  Page 14  Monday, August 8, 2011  5:15 PM
 

15
Setup Guide
STEP 4Turning the Power ON
The power of the scanner can be turned ON and OFF with the power 
button on the front of the scanner.
1Make sure that the scanner and computer are connected 
properly.
2Press the power button.
The power button lights blue when the power turns ON.
Hint
A balloon message such as shown below appears on the task bar. If 
you wait a while, automatic scanner recognition will end and the 
scanner will become ready to use.
Ð
When the scanner is properly connected to the...

16
Introduction
Thank you for purchasing the Canon imageFORMULA DR-M140 
Document Scanner. 
Please read the following manuals carefully and familiarize yourself 
with the functions of the scanner before use to ensure you sufficiently 
understand the functions and make the most of the scanner’s 
capabilities. After reading the manuals, store them in a safe place for 
future reference.
Manuals for the Scanner
Documentation for this scanner consists of the following manuals.
●Reference Guide (this manual)...

17
Table of Contents
Setup Guide ......................................................................... 6
Introduction ....................................................................... 16
Symbols Used in This Manual .................................................... 16
Important Safety Instructions..........................................  18
Installation Location ................................................................... 18
AC Adapter...

18
Important Safety Instructions
To ensure the safe operation of this scanner, be sure to read the 
safety warnings and precautions described below.
Installation Location
The performance of this scanner is affected by the environment in 
which it is installed. Make sure that the location where the scanner is 
installed meets the following environmental requirements.
●Provide adequate space around the scanner for operation, 
maintenance, and ventilation.
●When scanning documents using the straight path,...

19
Moving the Scanner
●When moving the scanner, always hold it with both hands to avoid 
dropping it.
●Make sure to disconnect the interface cable and AC adapter before 
moving the scanner. If the scanner is transported with these items 
connected, the plugs and connectors may be damaged.
Handling
WARNING
Note the following precautions whenever using the scanner. Failure to 
do so may result in a fire or electric shock.
●Never use alcohol, benzene, paint thinner, aerosol sprays, or any 
other highly...

20
●When unplugging the power cord, grasp it firmly by its plug. Do not 
pull directly on the power cord, as this may damage or expose the 
cords internal wiring, resulting in a fire or electric shock.
●Leave sufficient space around the power plug so that it can be 
unplugged easily. If objects are placed around the power plug, you 
will be unable to unplug it in an emergency.
●Do not allow water or flammable substances (alcohol, paint thinner, 
benzene, etc.) to spill into the scanner, as this may...