Canon IXUS 155 User Manual

71
5	 Review	the	new	image.
zzPress the  button. [Display new 
image?] is displayed.
zzPress the  buttons to choose 
[Yes], and then press the  button.
zzThe saved image is now displayed.
•	 Editing is not possible for images shot at a resolution of [
] or [] 
(=  36).
•	 Images cannot be resized to a higher resolution.
Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be 
detected and automatically adjusted to the optimal brightness....

72
3	 Correct	the	image.
zzPress the  button.
zzRed-eye detected by the camera is now 
corrected, and frames are displayed 
around corrected image areas.
zzEnlarge or reduce images as needed. 
Follow the steps in “Magnifying Images” 
(=
  65).
4	 Save	as	a	new	image	and	review.
zzPress the  buttons to 
choose [New File], and then press the 
 button.
zzThe image is now saved as a new file.
zzFollow step 5 in “Resizing Images” 
(=  71).
•	 Some images may not be corrected accurately.
•	 To overwrite the...

73
Setting Menu
Customize or adjust basic camera functions for greater convenience
Adjusting	Basic	Camera	Functions	................74Silencing Camera Operations ............................... 74
Adjusting the Volume ............................................ 74
Hiding Hints and Tips ............................................ 74
Date and Time ....................................................... 74
World Clock ........................................................... 75Lens Retraction Timing...

74
Adjusting Basic Camera Functions
MENU (=  23) functions on the [3] tab can be configured. Customize 
commonly used functions as desired, for greater convenience.
Silencing Camera Operations
Silence camera sounds and movies as follows.
zzChoose [Mute], and then choose [On].
•	 Operation can also be silenced by holding down the < p> button as you turn 
the camera on.
•	 Sound is not played during movies ( =
  62) if you mute camera sounds. 
To restore sound during movies, press the < o> button. Adjust...

75
World Clock
To ensure that your shots will have the correct local date and time when \
you 
travel abroad, simply register the destination in advance and switch to \
that 
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your \
home time zone, as described in “Setting the Date and Time” (=
  13).
1	 Specify	your	destination.
zzChoose [Time Zone], and then press the 
 button.
zzPress the...

76
Screen Brightness
Adjust screen brightness as follows.
zzChoose [LCD Brightness], and then 
press the  buttons to adjust the 
brightness.
•	For maximum brightness, press and hold the < p> button for at least one 
second when the shooting screen is displayed or when in single-image dis\
play. 
(This will override the [LCD Brightness] setting on the [ 3] tab.) To restore 
the original brightness, press and hold the < p> button again for at least one 
second or restart the camera.
Hiding the Start-Up...

77
•	Formatting or erasing data on a memory card only changes file 
management information on the card and does not erase the data 
completely. When transferring or disposing of memory cards, take 
steps to protect personal information if necessary, as by physically 
destroying cards.
•	 The total card capacity indicated on the formatting screen may be less t\
han 
the advertised capacity.
Low-Level	FormattingPerform low-level formatting in the following cases: [Memory card error]\
 is 
displayed, the...

78
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the\
 
camera create folders each day you shoot to store shots taken that day.
zzChoose [Create Folder], and then choose 
[Daily].
zzImages will now be saved in folders 
created on the shooting date.
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed 
on the screen. Other certification logos are printed in this guide, on the 
camera packaging, or on the...

79
Restoring Defaults
If you accidentally change a setting, you can restore default camera 
settings.
1	 Access	the	[Reset	All]	screen.
zzChoose [Reset All], and then press the 
 button.
2	 Restore	default	settings.
zzPress the  buttons to choose 
[OK], and then press the  button.
zzDefault settings are now restored.
•	The following functions are not restored to default settings.
- [3 ] tab settings [Date/Time] (=  74), [Time Zone] (=  75), [Language ] 
( =  78), and [Video System] (=  84)
- Custom white...

80
Accessories
Enjoy the camera in more ways with optional Canon accessories and other \
compatible accessories sold separately
System	Map	......................................................81
Optional
	Accessories....................................... 82Power Supplies .....................................................82
Flash Units ............................................................ 82
Other Accessories ................................................. 82
Printers...