Canon large format printer imagePROGRAF iPF6400 User Manual

3
 
Make sure the  Main sheet is displayed.
4
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
5
Make your selection in the  EPrint Target  list.
6
Make your selection in the  FPrint Quality  list.
7
 
Click the  Page Setup  tab to display the  Page Setup
sheet.
8
In  APage Size , click the size of the original as specified in the application software. In this case, click  ISO A3.
9
Select and click a roll paper in the  LPaper Source  list.
10
Select...

11
 
Click the  Layout tab to display the  Layout sheet.
12
Select the  APage Layout  check box.
13
Click 4 Pages/Sheet  in the APage Layout  list.
Note
•You can select the layout order for placing four pages on a sheet and a frame border in the Page Layout Printingdialog box by clicking BSet.14
Confirm the print settings and print as desired.
Note
•For tips on confirming print settings, see "Confirming Print Settings →P.178"
Printing Multiple Pages Per Sheet (Mac OS X)
Printing Multiple Pages...

1
This sets the BFormat for  and CPaper Size .Note
•The configuration method varies depending on the OS andapplication software you are using.If Page Setup is displayed in the application menu, the set-tings are configured by opening the Page Attributes dialogbox from Page Setup.If it is not displayed, the settings are configured in the up-per part of the printer driver displayed when you selectPrint from the application software menu.  2
Select the printer in the  APrinter  list.
3
In the FPaper Size...

7
 
Access the  Main pane.
8
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
9
Make your selection in the  EPrint Target  list.
10
Make your selection in the  FPrint Quality  list.
11
 
Access the  Page Setup  pane.
12
Select and click a roll paper in the  APaper Source  list.
  
Printing Multiple Pages Per Sheet (Mac OS X)...

13
Make sure the width of the loaded roll is displayed in the BRoll Width  list—in this case,  ISO A2/A3
(420.0mm) .Note
•If the width of the roll loaded in the printer is not shown inBRoll Width, click LPrinter Information on the Mainpane to update the printer information. 14
 
Make sure  CPage Size  shows the original size as
specified in  CPaper Size  in the Page Attributes  dia-
log box—in this case,  ISO A3.
15
Confirm the print settings, and then click  MPrint  to start printing.
Note
•For tips on...

Important•When printing using this function, the Print Centered, Watermark, No Spaces at Top or Bottom (Conserve Paper),and Page Options settings are disabled.
For instructions on printing large posters, refer to the following topics, as appropriate for your computer and oper-
ating system.
•
Printing Large Posters (Windows)→P.136
Note
•This method of poster printing is supported in Windows.
Printing Large Posters (Windows)
Printing Large Posters (Windows)
You can enlarge an original to print it in...

6
 
Click the  Page Setup  tab to display the  Page Setup
sheet.
7
In  APage Size , click the size of the original as specified in the application. In this case, click  ISO A2.
8
Click Manual  in the LPaper Source  list.
9
 
Click the  Layout tab to display the  Layout sheet.
10
Select the  APage Layout  check box.
11
Click Poster (2 x 2)  in the APage Layout  list.
Note
•Follow the steps below to print only a portion of the poster as divided for printing.•Click BSet under APage Layout to display the...

12
Confirm the print settings and print as desired.Note
•For tips on confirming print settings, see "Confirming Print Settings →P.178"Printing Large Posters (Windows)                                                                                                                                                                                      iPF6400...

Centering originals
Centering originals
Printing Originals Centered on Rolls ............................................................................................................................. 139
Printing Originals Centered on Rolls (Windows) ................................................................................................ 139
Printing Originals Centered on Rolls (Mac OS X) .............................................................................................. 141...

3
 
Make sure the  Main sheet is displayed.
4
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
5
Select the print target in the  EPrint Target  list.
6
 
Click the  Page Setup  tab to display the  Page Setup
sheet.
7
In the  APage Size  list, click the size of the original as specified in the application. In this case, click  ISO A4 or
Letter (8.5"x11") .
8
Select and click a roll paper in the  LPaper Source  list.
9
Select the width of the...